Transcript
PROGRAMMABLE LINEAR D.C. POWER SUPPLY PROGRAMMABLE DUAL-RANGE D.C. POWER SUPPLY The PSS Series is single output, 96 or 100W, programmable linear DC power supply. OVP, OCP, and The PSM Series is single output / dual range, 120 or 200W, programmable linear DC power supply. OVP, OCP, OTP, and output On/Off control protect PSM and loads from unexpected conditions. High resolution, high regulation, low ripple are maintained at 1mV/1mA, 0.01%, and less than 350 Vrms, respectively. VFD panel with simultaneous view of output and parameter setting provide comfortable operation. Configuration is simplified with output limit store/recall function and Auto step running feature for continuous testing. Self-test and software calibration features reduce maintenance overhead. SCPI command set and Labview driver access through RS-232C or GPIB interface provide remote control and ATE software development capability. The PSM Series is an ideal choice for high precision, high reliability application such as QA verification and R&D. OTP protect PSS and loads from unexpected conditions. High resolution is maintained at 10mV, 1mA. LCD panel with simultaneous output/parameter view and automatically regulated cooling fan for low noise provide comfortable operation. SCPI command set and Labview driver access through RS-232C or optional GPIB interface provide remote control and ATE software development capability. The compact PSS Series is suitable for both bench-top and rack mounting applications in high resolution. (Note: only one interface, RS-232C or GPIB, can be installed at a time) SPECIFICATIONS PSM-Series PSM-2010 PSM-3004 DC OUTPUT Low Range High Range Patent No: ZL 03 3 01174.5 SPECIFICATIONS FEATURES * Digitized Programmable Interface, High Resolution 10mV, 1mA * High Stability, Low Drift * Over-Voltage, Over-Current, Over Temperature Protection * Intelligent Fan Control (Change by Output Power) * Built-in Buzzer Alarm * LabVIEW Driver * Standard Interface: RS-232C * Option: GPIB (IEEE-488.2) POWER SUPPLIES * Optional European Jack Type Terminal PSS-2005 PSS-3203 OUTPUT Voltage 0~20V 0~32V Current 0~5A 0~3A 0~21V 0~33V OVP LOAD REGULATION < 3mV (< 5mV, rating current >3.0A) Voltage < 3mA (< 5mA, rating current >3.0A) Current LINE REGULATION < 3mV Voltage < 3mA Current RESOLUTION Voltage 10mV 1mA (2mA, rating current >3.0A) Current 10mV OVP PROGRAM ACCURACY(25 5 C) Voltage < 0.05%+20mV < 0.1%+5mA (+10mA, rating current>3.0A) Current < 0.05%+20mV OVP RIPPLE & NOISE(20Hz~20MHz) Voltage Ripple : 1mVrms/3mVp-p ; Noise : 2mVrms/30mVp-p < 3mArms (< 5mArms, rating current >3.0A) Current FEATURES * Single Output Dual Range Max. 200W * High Resolution: 1mV/1mA * Stable & Clear Power: 0.01% Load/Line Regulation, 350 Vrms Ripple * 100 Sets Memory * Auto Step Running With Time Setting * Safety Design: OVP, OCP & OTP ; Output ON/OFF Control(OCP Provides Delay Setting to Prevent Trip of High Start-Up Current) * Self-Test and Software Calibration * High Visible Vacuum-Fluorescent Display * Front and Rear Output Terminal * Standard Interface : RS-232C, GPIB * Option : European Jack Type Terminal TEMPERATURE COEFFICIENT (0 ~ 40 C) < 100ppm+3mV Voltage < 100ppm+3mA Current READBACK RESOLUTION Voltage 10mV 1mA (2mA, rating current >3.0A) Current READBACK ACCURACY(25 Voltage Current Rear Panel < 0.05%+10mV < 0.1%+5mA < 100ppm+10mV < 100ppm+5mA (+10mA rating current >3.0A) < 100mS < 100mS ( 10% rating load) ORDERING INFORMATION PSS-2005 100W Single Output Programmable D.C. Power Supply PSS-3203 96W Single Output Programmable D.C. Power Supply ACCESSORIES : User manual x 1, Power cord x 1 Test lead GTL-104 x 1(PSS-2005) or GTL-105 x 1(PSS-3203) European Test Lead GTL-204 x 1 (PSS-2005) or GTL-203 x 1 (PSS-3203) Option Opt.01 : GPIB Interface (factory installed) D9 Opt.02 : GRA-403 Rack Mounting ( 19", 4U ) 0 ~ 30V/6A 0 ~ 60V/3.3A Ripple & Noise <50V:<500 Vrms/3mVpp >50V:<1mVrms/3mVpp < 350 Vrms/3mVpp < 350 Vrms/2mVpp CONSTANT CURRENT OPERATION Regulation Load regulation < 0.01% + 250 A +(% of output + offset) Line regulation < 0.01% + 250 A Ripple & Noise < 2mArms RESOLUTION 1mV 1mV Programming Voltage Current 1mA 0.5mA Readback 0.5mV 0.5mV Voltage Current 1mA 0.1mA Front Panel OVP/OCP Voltage Current Voltage Current ACCURACY Programming Voltage Current Readback Voltage Current Voltage OVP/OCP Current TRANSIENT RESPONSE 2mV 0.5mA 1mV 0.5mA 1mV 1mA(<10A),10mA( 10A) 10mV 10mA 0.05% + 10mV 0.2% + 10mA 0.05% + 5mV 0.15% + 5mA 0.1% + 10mV 0.4% + 10mA COMMAND PROCESSING TIME 5 C) Voltage < 100ppm+10mV < 150ppm+10mA Current INTERFACE Standard : RS-232C; Option: GPIB POWER SOURCE AC 100V/120V/ 220V 10%, 230V (+10%/-6%), 50/60Hz DIMENSIONS & WEIGHT 108(W) x 140(H) x 315(D) mm, Approx. 4.8kg 0 ~ 8V/20A 0 ~ 15V/7A 0 ~ 20V/10A 0 ~ 30V/4A CONSTANT VOLTAGE OPERATION Regulation Load regulation < 0.01% + 2mV +(% of output + offset) Line regulation < 0.01% + 2mV < 50 sec. ( for output to recover to within 15mV following a change in output current from full load to half load ) READBACK TEMPERATURE COEFFICIENT Voltage Current RESPONSE TIME Voltage Up (10%~90%) Voltage Down (90%~10%) DRIFT PSM-6003 Rear Panel 100 ms VOLTAGE PROGRAMMING RESPONSE TIME (for resistive load) Full Load 95 ms 50 ms Voltage Up 45 ms 20 ms No Load Full Load Voltage Down 30 ms 45 ms No Load 450 ms 400 ms STABILITY (% of output + offset) Voltage 0.02% + 1mV Current 0.1% + 1mA MEMORY 100 sets Store/Recall TEMPERATURE COEFFICIENT PER C (% of Output + Offset) Voltage 0.01% + 3mV Current 0.02% + 3mA POWER SOURCE AC 100V/120V/220V 10% , 230V : - 6% ~ + 10% , 50/60Hz INTERFACE Standard RS-232C , GPIB DIMENSIONS & WEIGHT 230(W) x 140(H) x 380(D) ; Approx. 10kg 80 ms 100 ms 30 ms 450 ms POWER SUPPLIES PSS-Series ORDERING ORDERING INFORMATION INFORMATION PSM-2010 200W Single Output, Programmable Power Supply PSM-6003 200W Single Output, Programmable Power Supply PSM-3004 120W Single Output, Programmable Power Supply ACCESSORIES : User manual x 1, Power cord x 1, Test lead GTL-104 x 1 , European test lead GTL-204 x 1, Ground lead GTL-201A x 1 (European terminal), Sense lead GTL-202 x 1 (European terminal) Option Optional Accessories Opt. 01: GTL-232 RS232C Cable, 9-pin Female to 9-pin, null Modem for Computer Optional Accessories NOTE : When Opt.01 GPIB interface is ordered, the standard interface RS-232C will be deleted. GTL-232 GRA-407 19", 4U Rack Mounting ( 19" , 4U ) RS-232C Cable, 9-pin Female to 9-pin , Null Modem for PC Computer Made to Measure. Good Will Instrument Co., Ltd. D10