Download K-BUS Dimmer Module User manual

“Brightness value at obj=0(1%~100%)”
This parameter defines the brightness value when receiving “0” by “X preset 1”.
Option: 1~100%
“Brightness value at obj=1(1%~100%)”
This parameter defines the brightness value when receiving “1” by “X preset 1”.
Option: 1~100%
“Preset 1 can be set via the bus”
This parameter defines the possibility to change the preset value. It is able change
the preset value with “enable” and also start the communication object “Set preset 1”,
which is used to save the current switch status as the new preset value. It will save the
current brightness status to the “brightness value at obj=0” and replace that value with “0”;
will save the current brightness status to the “brightness value at obj=1” and replace that
value with “1”.
Options: Enable
Disable