Download the manual

ENERGY MATTERS SOLAR ANALYSER
WWW.ENERGYMATTERS.COM.AU/IPHONE
Energy Matters Solar Analyser user manual
The Energy Matters Solar Analyser is designed as a pre-screening tool for determining the
suitability of a site for a solar power installation, but it can also be used to estimate output
of existing systems.
Although designed primarily for the iPhone 3GS, Solar Analyser will work with relative
accuracy on the iPhone 3G and iPod Touch. While the compass hardware is not available in
the older iPhone 3G, (and neither compass or GPS functionality are available on iPod Touch),
Solar Analyser is still capable of providing useful results with these devices.
You can download the free Solar Analyser here:
http://www.energymatters.com.au/iphone/
.. or read on for instructions
Please note
•
•
•
Do not make financial decisions based solely on the information from this tool.
Do not climb on a rooftop without proper safety training and equipment.
NOTE: The Solar Analyser is for Australian use only. Solar enthusiasts outside
Australia can use the Sun Tracker App from iMeasure Systems, available here:
http://www.imeasuresystems.com/
About Energy Matters: Energy Matters is one of Australia's largest companies solely
dedicated to renewable energy. Our systems and components generate solar hot water and
renewable power for private homes, businesses and schools around Australia and the
Pacific. Visit us at www.energymatters.com.au
ENERGY MATTERS SOLAR ANALYSER
WWW.ENERGYMATTERS.COM.AU/IPHONE
Table of Contents
•
•
•
•
•
•
•
•
•
•
•
•
About the Energy Matters Solar Analyser
Data summary (site specification report)
Support
Performing a site survey with Solar Analyser
Initial device setup
Site setup – basic site details
Site setup – specific details
Site setup – data collection
Analysis of data.
Results report export.
Importing a Photo or Panorama.
Getting an instant online quote
About Solar Analyser
Energy Matters' Solar Analyser is an iPhone based site evaluation tool, providing full solar
site analysis and is absolutely FREE to Australian users.
http://www.energymatters.com.au/iphone/
NOTE: Solar enthusiasts outside Australia can use the Sun Tracker App from iMeasure
Systems. http://www.imeasuresystems.com/
Solar Analyser makes the most out of the iPhones 3GS’s features. The compass and
inclinometer functions, together with the built in GPS, has enough processing power to
handle complex sun positioning algorithms.
Solar Analyser can perform shade analysis in seconds. It is simple to use, quick to deploy,
and features once-only calibration and minimum site set-up time. Since it is built into your
phone, it requires no extra hardware.
Using a built-in climate database, the Solar Analyser provides a realistic estimation of the
solar availability (peak sun hours) at a location, taking into account the local shading. It also
supports fixed, single and dual axis tracking systems.
The Energy Matters Solar Analyser includes a large database of solar panel and inverter
models and will even calculate the $/month production of the proposed site under standard
electricity rates or feed in tariffs.
About Energy Matters: Energy Matters is one of Australia's largest companies solely
dedicated to renewable energy. Our systems and components generate solar hot water and
renewable power for private homes, businesses and schools around Australia and the
Pacific. Visit us at www.energymatters.com.au
ENERGY MATTERS SOLAR ANALYSER
WWW.ENERGYMATTERS.COM.AU/IPHONE
Data summary (site specification report)
The Solar Analyser generates a personalised PDF site survey summary including a graphical
presentation of data and easy to interpret site information. The report information
includes:
•
•
•
yearly shade profile
monthly AC and DC output
monthly savings/profit generated.
Solar Analyser allows you to e-mail the report for record keeping, for analysis by Energy
matters, or to request a quote for a grid connected solar system.
Support
Energy Matters welcomes enquiries relating to solar power systems, but support relating to
the use of the Solar Analyser is only provided via the Energy Matters Forums
http://forums.energymatters.com.au/solar-analyser/
Performing a Site Survey with Solar Analyser
Initial Device Setup
About Energy Matters: Energy Matters is one of Australia's largest companies solely
dedicated to renewable energy. Our systems and components generate solar hot water and
renewable power for private homes, businesses and schools around Australia and the
Pacific. Visit us at www.energymatters.com.au
ENERGY MATTERS SOLAR ANALYSER
WWW.ENERGYMATTERS.COM.AU/IPHONE
Before calculations can begin, the iPhone must be calibrated work accurately with Solar
Analyser. This once-only calibration will ensure accurate measurements are made allowing
accurate site data collection.
On opening the Solar Analyser application, enter the setup menu (top left of the home
screen) and press the calibrate button (top right of the setup screen) and follow the onscreen instructions.
Site Setup – basic site details
When opening Solar Analyser, the application will automatically find your location using the
built in iPhone GPS. iPod Touch users can fill missing values manually, using an online maps
service to ascertain latitude and longitude.
•
•
•
•
Enter the Setup menu and give the site a unique “Site Name” to later help identify
the results.
The altitude value is filled automatically based on your location
The "Heads up Sight" option is available only to iPhone users (not iPod Touch users).
It allows an easier method of scanning the skyline as explained below. For iPhone
users, the "Across Face" sighting method used by the iPod Touch can also be selected
if desired by turning off this option
Slide the Array Tilt and Array Azimuth selectors to the aspect and angles
representative of the roof space.
o Array Tilt is the angle of elevation from flat ground
o Array Azimuth is the angle clockwise from North of the direction that the solar
panel array faces. For example, if the solar panel array will face true north, then the
Array Azimuth is 0 degrees.
About Energy Matters: Energy Matters is one of Australia's largest companies solely
dedicated to renewable energy. Our systems and components generate solar hot water and
renewable power for private homes, businesses and schools around Australia and the
Pacific. Visit us at www.energymatters.com.au
ENERGY MATTERS SOLAR ANALYSER
WWW.ENERGYMATTERS.COM.AU/IPHONE
Site Setup – specific details
Using the menus at the bottom of the Setup screen, fill out the following menus:
•
•
•
•
•
Select framing type using the Tracking button – fixed array is the default. Single and
dual axis tracking options can be selected by pressing this button
Use the Weather Station button to locate the weather station closest to you. Data
from your nearest weather station will be used to further improve solar performance
estimates
Adjust the value of energy in the $/kWh menu. This value can be obtained from an
energy bill. If you wish to base this on feed in tariff rates, you can gain feed in tariff
information here:
http://www.energymatters.com.au/government-rebates/feedintariff.php
Select the PV module from the PV module menu
Select the Inverter model from the Inverter model menu
Site Setup – data collection
Locate yourself on the roof or area the solar array is most likely to be mounted. Solar
Analyser uses the skyline from this point on the roof to establish potential shading from
buildings or trees that could be detrimental to solar performance. If potential shading is
expected, position the iPhone closest to the end of the array most likely to be shaded.
(NOTE: Complete these next couple of steps only if you have an iPhone 3G or iPod Touch iPhone 3Gs users should just click the "Skyline Scan" button (top left of setup screen) then
follow the steps AFTER the Skyline Scan screenshot image below)
When in position, use the iPhone 3G or iPod Touch camera to take a single image of the
skyline from the solar array’s perspective. If the solar aspect is wide and unimpeded, an
iPhone image stitching application could be used to increase the width of the shot (this is
not compulsory, but will better demonstrate the full visual skyline).
Now return to the Energy Matters Solar Analyser application and click Skyline Scan (top left
of setup screen).
Observe the solar aspect for any obvious trees or buildings blocking early morning or
late afternoon sun. Using the East/West limit button Slide the East and West markers to
approximate the beginning and end of the ‘solar window’ as measured in degrees.
About Energy Matters: Energy Matters is one of Australia's largest companies solely
dedicated to renewable energy. Our systems and components generate solar hot water and
renewable power for private homes, businesses and schools around Australia and the
Pacific. Visit us at www.energymatters.com.au
ENERGY MATTERS SOLAR ANALYSER
WWW.ENERGYMATTERS.COM.AU/IPHONE
Use the Skyline Trace button on the Skyline Scan screen (bottom left of screen) to begin
the trace process. Note: If your Skyline Scan screen tool bar just contains a row of arrows,
click the "Done" button on the right hand side, which will then take you to a screen similar to
the above.
Starting at the “sight” screen, familiarize yourself with the crosshairs. Note: iPod Touch
users will only have access to the "Across Face" inclinometer method of scanning, not the
crosshair method. However, if iPhone users find the glare on the screen or camera is too
great the "Across-Face" method can be used by entering the Setup screen and turning off
the "Heads Up" sight switch.
Point the crosshairs (Heads Up method) or arrow (Across Face) at the right hand starting
point of your skyline. Heads Up users will need to press Start, but for Across Face users, the
scan will commence automatically.
About Energy Matters: Energy Matters is one of Australia's largest companies solely
dedicated to renewable energy. Our systems and components generate solar hot water and
renewable power for private homes, businesses and schools around Australia and the
Pacific. Visit us at www.energymatters.com.au
ENERGY MATTERS SOLAR ANALYSER
WWW.ENERGYMATTERS.COM.AU/IPHONE
Crosshairs (Heads Up
function 3G and 3Gs)
Across Face method for iPod Touch. iPhone
users can also select this method in setup.
Slowly trace (keeping above 0°) from right to left the outline of buildings and trees visible in
the skyline and press ‘finish’ when you reach the left hand limit of the solar aspect. A typical
scan takes about 15 seconds
For iPhone 3G and iPod Touch users, if required, then use the Nudge and Image
Underlay buttons to adjust the Skyline Trace to match the sun’s curve and position. The
image will add a level of realism to the trace, further confirming the accuracy of the Skyline
Trace. Please note that if using an image underlay, it will greatly increase the size of the final
PDF report.
Once the Skyline has been established, Solar Analyser will present a
sun path plot, showing today's estimated solar trajectory together with an animated sun
(manipulate the sun’s positions using the Simulate sun path, Pause sun path, and Reset sun
path buttons). This demonstrates the sunrise and sunset for the time of year, and the
elevation achieved by the sun at midday. When in the default Viewing Mode, Solar Analyser
also shows the sun path for the summer and winter solstice.
About Energy Matters: Energy Matters is one of Australia's largest companies solely
dedicated to renewable energy. Our systems and components generate solar hot water and
renewable power for private homes, businesses and schools around Australia and the
Pacific. Visit us at www.energymatters.com.au
ENERGY MATTERS SOLAR ANALYSER
WWW.ENERGYMATTERS.COM.AU/IPHONE
Analysis of data
Once a Skyline Scan and all other data entry is complete, press “Analyse” to start the
calculation process. Please note: The analysis can take up to 40 seconds.
•
•
The analysis function is calculating the sun's position for every minute of the year and
comparing that to the elevation of skyline you captured.
The analysis function is also looking up the hourly weather data to find the typical
direct beam and diffused solar radiation and calculating the incidence angle of the
sun on the panel to determine how much of the available energy is captured or lost
through shade and climate factors including panel heating.
About Energy Matters: Energy Matters is one of Australia's largest companies solely
dedicated to renewable energy. Our systems and components generate solar hot water and
renewable power for private homes, businesses and schools around Australia and the
Pacific. Visit us at www.energymatters.com.au
ENERGY MATTERS SOLAR ANALYSER
WWW.ENERGYMATTERS.COM.AU/IPHONE
Handy tip: If you want a record of this or any other screen just press the iPhone top right
button and home button together. That will execute a screen capture that will be saved in
your iPhone photo album.
Results report export
At this point you may decide try a different location or you may wish to change the panel tilt
& azimuth. To summarize and save the current results press “Report” to view the full
analysis.
Press “Preview” to preview the report on screen or “Email Report” to send a copy of the
PDF report via e-mail. Please note that if using an image underlay, it will greatly increase the
size of the final PDF report.
Importing a Photo or Panorama
The iPhone camera has a view angle of 60° by 40°. Solar Analyser works best when the user
takes photos in the portrait orientation, this means that the user can cover 60° of elevation.
After the photo has been imported to the trace background, the user can then use a known
reference (such as a tree) to correctly align the image. In some cases (where sunlight
obstacles are numerous), it is desirable to have a wider image (a panorama) that covers the
full sun path from east to west.
Some applications known to capture panoramas are AutoPan and AutoStitch.
Getting an instant online quote
Once you have your site information, you can use Energy Matters' online quoting system to
receive an obligation free instant estimate!
https://www.energymatters.com.au/iphone/iquote.php
Sun Tracker ©2009 Imeasure Systems
www.imeasuresystems.com
Solar Analyser ©2009 Energy Matters
www.energymatters.com.au/iphone
About Energy Matters: Energy Matters is one of Australia's largest companies solely
dedicated to renewable energy. Our systems and components generate solar hot water and
renewable power for private homes, businesses and schools around Australia and the
Pacific. Visit us at www.energymatters.com.au