Download CM25-00324-6Ea

CHAPTER 2 DEPENDENCE FUNCTIONS
2.1 Simulator Debugger
Su pp o r t
2.1.4
S o ft
M an ual
Interrupt Simulation
This section explains interrupt simulation.
■ Interrupt Simulation
The MCU operation in response to an interrupt request is simulated.
Interrupts can be generated as follows:
• While the program is being executed with a specified cycle count, interrupts are generated per specified
interrupt number, and overrides the interrupt generating conditions.
• Interrupts are generated every time when the command execution cycle count exceeds the specified
cycle count.
If interrupts are masked by the interrupt enable flag when the interrupt-generating conditions are
established, the interrupts are suspended.
■ Control Methods of Interrupts
Interrupts are configured using the following methods.
• Dialog
- Interrupt dialog
Refer to section "4.7.2.2 Interrupts" of "SOFTUNE Workbench Operation Manual".
• Command
- SET INTERRUPT
Refer to section "1.26 SET INTERRUPT" of "SOFTUNE Workbench Command Reference Manual".
38
CM25-00324-6Ea, September 1, 2014