Transcript
Screen Protector Applying your Xuma Screen Protector User Manual . Remove any films or other intervening substances from your iPhone’s screen. Thank you for choosing Xuma. . Use the included microfiber cleaning cloth to clean your iPhone’s screen, making sure to remove any dust and fingerprints. If needed, you can also use the disposable dust sticker to attract any remaining dust. This screen protector is designed to protect your iPhone’s screen from scratches, dust, and smears. It’s easy to apply and remove, and it adheres to the screen without leaving behind any sticky residue. Please read the instructions before applying your Xuma screen protector. protector with the included applicator card. As you push the applicator card further down the screen of the iPhone to apply the screen protector, gradually peel off the mask. . Peel back mask about an inch from the screen protector. Be sure not to touch the exposed side of the screen protector. . Make sure your iPhone is on a stable surface, and align the screen protector with your iPhone. Make sure the cutouts are properly aligned. . Use the applicator card to smooth out any remaining air bubbles by pushing them out to the edge of the screen protector. . Hold the screen protector up by mask while gently pushing down on the screen . Peel off mask from the screen protector. www.XumaUSA.com Xuma is a registered trademark of the Gradus Group. © Gradus Group LLC. All Rights Reserved. GG1
