Download PH7208™ - Waakzaam Wonen

Indoor Siren 110 dB
PH7208™
EN
Extra Indoor X-10 Siren 110 dB
• For use with SafeGuard and TotalGuard set
• Controlled via the existing wiring
• Very loud additional siren to be mounted at a free
chosen location in the house. The SafeGuard and
TotalGuard systems will control this siren through the
existing power line circuit.
ES
Sirena interna X-10 adicional 110 dB
• Apto para SafeGuard y TotalGuard
• Se maneja por el cableado presente.
• Sirena muy fuerte para otras partes de la casa. Se
maneja por SafeGuard y TotalGuard utilizando la red
de alumbrado.
DE
Zusatz innen x-10 Sirene 110 dB
• Geeignet für SafeGuard und TotalGuard
• Steuerung verläuft über Ihre bestehende Lichtnetzverkabelung
• Sehr laute Zusatzsirene für andere Stellen im Haus. Wird
von den Systemen SafeGuard und TotalGuard über das
Lichtnetz gesteuert.
IT
Sirena X-10 aggiuntiva 110dB
• Adatto a SafeGuard e TotalGuard
• Controllabile attraverso la linea elettrica esistente.
• Potentissima sirena aggiuntiva per l’uso in un’altra
stanza della casa. È comandato dai sistemi SafeGuard e
TotalGuard attraverso la linea elettrica.
FR
Sirène intérieure additionnelle X10
110 dB
• Convient à SafeGuard et TotalGuard
• Est activé par le câblage existant.
• Sirène additionnelle très sonore pour ailleurs dans la
maison. Est activé par les systèmes SafeGuard et TotalGuard par le réseau d’électricité.
NL
Extra X-10 binnensirene 110 dB
• Geschikt voor SafeGuard en TotalGuard
• Wordt via bestaande bekabeling aangestuurd.
• Zeer luide extra sirene voor elders in de woning. Wordt
door SafeGuard en TotalGuard systemen via het lichtnet
aangestuurd.
Smart Solutions at Home
PH7208™
The Powerhorn PH7208 remote siren is a remote controlled siren with a piercing 110
decibel sound output. It receives signals over existing house wiring and responds to the
“All Lights On/All Units Off” flashing sequence from the SC9000 Home Security System,
or the SM10 Universal X-10 transmitter. The Powerhorn adds to any security system the
ability to trigger a remote siren without the need for any special wiring. You just plug
it in! Any security system which uses the SM10, to flash lights when the alarms trips, can
trigger the Powerhorn.
When used with an X-10 security system or the SM10, the Powerhorn will trip a few
seconds after the alarm trips and continues to sound until 4 seconds after the alarm
stops or is disarmed.
Technical data
Power supply
You can also trip the Powerhorn from any other X-10 controller, which is useful in
panic situations. It can be set to respond to any of the 256 X-10 codes available (16
House codes x 16 Unit Codes). You simply press All Lights On followed by All Units Off
repeatedly or press the unit code corresponding to the number set on the PH7208 then
press On, then Off repeatedly. This will trigger the Powerhorn after about two ON-OFF
sequences and will continue as long as you keep repeating the sequence. The siren will
shut off about 4 seconds after the last key is pressed.
Also available
230VAC +10% -15% 50 Hz
Power Consumption
<2W
Siren
Piëzo, 4-fold
Sound pressure
110dB(A)
Signal sensitivity
better than 50 mVpp at 120 kHz
Input impedance
> 55 Ohm (P-N) at 120 kHz
Responds to X-10 key codes Automatically after 5x All Lights On/All Units off
command or 5x ON OFF
Visit www.marmitek.com for our complete product range.
Plug-in Modules
Transmitters/Controllers
Dimmers/Switchers
Build-in Modules
Din-rail Modules
Micro Modules
Set includes
1x PH7208
1x User Manual
English, Deutsch
Français, Espanol,
Italiano, Nederlands
Order information
PH7208™
Universal box size (LxWxH)
www.marmitek.com
© MARMITEK
Europlug Art. nr. 08929
UK plug Art. nr. 09732
90 x 37 x 144 mm with euroslot
Smart Solutions at Home
22722/20101104