Download Manual(150331)

Transcript
4.20 PoE Status
___________________________________________________________________________________________________________________________________________________
Status
Description
___________________________________________________________________________________________________________________________________________________
Port
This is the logical port number for this row.
PD class
The power class detected from the remote PD (Powered Device)
Power Used
How much power the port currently is being delivered
Current Used
How much current the port currently is being delivered.
Port Status
The port's PoE status.
PoE Disabled - the PoE PSE function is configured as disabled.
PoE Turned ON - the port PoE power is ON.
No PD Detected - PoE function is enabled, but no PD connected
No PoE Chip Found - PoE controller is not found.
___________________________________________________________________________________________________________________________________________________
-106-