Download tivax stb-t9 manual - ElectroSchematics.com
Transcript
USER MANUAL STB-T9 PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn Tivax Digital TV Converter User Manual- Important Safety Instructions The Tivax Guarantee Tivax is dedicated to bring the world of digital televisio n to you, no matte r if your TV set is an older model. For questions or t echn ical issues, p leas e visit: www.tivax. com WARNING - TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD , RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PRESENT BLADE EXPOSURE. - TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE - TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PL UG TO WIDE SLOT FULLY IN SERT. CAUTION Risk of Electric Shock Do not open Caution: To reduce the risk of ele ctric shock, do not r emo ve cover (or back). No user- serviceable parts inside. R efer to qualified service p ersonnel. This symbol is intende d to alert the u ser to the presence of uninsulated “d angerous voltage ” within the product's en closure that may be of sufficient magnitude to constitute a r isk of electric shock to persons. This symbol is intende d to alert the u ser to the presence of impo rtant operating and main tenance (servicin g) instr uctions in the liter ature accompanying the app liance. Dolby Digital Certi fication Manufac tured un der license from Dolby Laboratories. “ Dolby ” , and the double-D symbol are trade mar ks o f the Dolby Labora tories. Caution: Do not alter or cha nge the c onstruction of this device without writte n authorization from Tivax, I nc . Further more, any unauthorized alteration of this device without w ritten approval by Tivax, inc. will void any w arranty and the owner's right to operate this device. Note: This eq uipment has been tested and found to comply with the lim its f or a Class B Digital Device, pursuant t o Part 15 of the FCC Rules. These limits a re designed to provide reasonable pr ot ec tion a gain st h armful interferenc e in a residential installation. This device generates, uses and also radiat e radio fr equency ener gy and, if not insta lled in a proper manner and used in acc ord ance with the instructions provided in this manual, ma y cause harm ful interf erence with other equipment. In ad dition, Tiv ax does not warrant th at interf erence will not occur when properly insta lled. If t he device does cause interference with other equipment please defer to this manual for sugg estions. Options include moving the dev ice or re-orienting it away from equipment. PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn Important Safety Information Always use care when using your Tivax. To reduce the risk of electrical shock, fire, or other possible injuries, always keep safety in mind when operating your Tivax ü Read all safety instructions and warnings before operating your Tivax receiver ü Keep this manual for future reference not use your Tivax near water or anyplace where it may make contact with ü Do water, such as swimming pools, sinks, etc. cleaning your Tivax, always unplug for safety. Do not use liquid cleaners ü When as they may affect the electronics. Instead, use a dry cloth. ü Your Tivax generates a small amount of heat, so do not block the vents or inhibit normal air circulation. To protect your Tivax from overheating, place it on a flat smooth surface, such as a shelf. Avoid placing it on rugs or other surfaces where air circulation may be blocked. ü Your Tivax comes with a standard polarized plug (one blade is wider than the other, with a third plug for grounding). Use outlets designed for this type of plug for your safety. If your outlet is not compatible with this plug please consult an electrician. ü Do not pinch, cut or crimp the electrical cord. ü Use only UL Certified antennas with your Tivax your Tivax during storms or when not used for long periods of time to ü Unplug protect from lightning or power surges your antenna according to the safety standards recommended by the ü Operate antenna manufacturer. When installing a rooftop or outdoor antenna, be sure to ground it to protect your Tivax and other indoor electronic equipment from power surges and lightning. WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable. WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like. Double Insulation. This is CLASS II apparatus. PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn Welcome to the world of Digital TV Welcome to the world of Digital TV All se t top boxes (STB) have been tested in the factory for proper operation. In case yo u experience any problems, please follow these simple step s to troubleshoot your proble ms. Please make su re your TV and STB are plugged in and powered up, and that the STB is properly connected to yo ur TV by either a RF cable or a A/V cable se t (red white yellow connectors on each end) following the guideline below. Don't forget to properly insert batteries into the remo te control u nit. Connection option RF: The STB can be operated in RF mode to connect to your TV. In this case the RF-OUT conn ector of the STB conn ects to your An ten na Input on your TV. Your TV must be tuned to either channel 3 or 4 and the STB need s to be set to the corresponding channel selected on theback of the STB by utilizing the small slide switch. Connection option A/V: If you TV is equipped with an A/V input, sometimes referred to as AV1 or AVin, Then you ma y want to choose the A/V connection for a be tter quality picture. A RF connection as described above has some inh erent limitation and a somewhat lower quality than A/V. Please make yo ur connection before turning on your devices and plug in the yellow terminated cable to the AV-in on your TV and the AV-out on the STB. Similarly, conne ct the red and white te rminated cable to the corresponding Audio-in on your TV and Au dio-ou t on the STB. Once a connection utilizing option RF or option A/V is mad e turn on your TV first and then your STB. The STB is turned on by pressin g the power button on the front, or usin g the remote, power up the STB. You should see a logo come up on your TV as the STB turns on. Since channel programing is different in various regions, you must set up your set top box with your channels b y using the auto scan fea ture. Make sure a suitable antenna is connected to the antenna input, la beled as RF-In on the STB, and a fter turning on your TV and STB, press the Menu b utton on your remote . Use the cursor keys around the OK bu tton to move th e highlighted field to Channe l-Scan and press OK. You may need to reorient your antenna to achieve best results. If you have an external a ntenna, it may have already been oriented such that it point to the transmitter stations. To help in orienting your antenna, a signal strength indicator can b e turned on in the STB. Use th e menu bu tton and select signal strength o r signa l qu ality item to display a signal quality bar on the scree n. Although digital TV will give a very clear picture when a signal is received in sufficient strength, a weak sig nal will result in dropouts or no pictu re at all. Analog stations would just be received with noise in the sound and snow in the picture, Digital transmissions will drop out or have large blocks of images missings if the RF signal is of insufficient strength or quality. Reorienting your antenna or getting a better quality antenna may solve this problem. Some experimenting may be required to obtain the best results. Than k you for choo sing a Tivax Se t Top Box and enjoy the new world of Digital Te levision. PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn Bienvenido al mundo de Digital TV Todas las cajas encima del televisor (STB) se han p robado en la fįbrica para la o peración apropiada. En caso de que usted encuentre cualquier problema, por favor siga estos paso s simples para localizar las averķas de sus problema s. Por favor asegu rece que su TV y STB estén conectado y encendido, y qu e el STB es conectado correctamente con su TV por un cable RF o cable A/V (conecta dores rojos amarillos blancos en cada extremo) que sigue la pauta de abajo. No se olvide de insertar correctame nte las baterķas en el control remoto. Opción de conexión RF: El STB se puede fun cionar en modo d el RF para conectar con su TV. En este caso el conectador de RF-OUT del STB conecta con su antena entrada en su TV. Su TV se debe ser sintonizado a cualq uier ca nal 3 o 4 y el STB necesita ser ajustado al can al co rrespondiente seleccion ado en la parte posteriora de l STB utilizando el interruptor pe queńo deslizante. Opción de conexión A/V: Si le TV equipan de una en trada de A/V, designada a veces AV1 o AVin, después usted puede desear e legir la conexión de A/V para una imagen de mejor calidad. Una conexión d el RF como se describe anteriormente tien e una cierta limitació n inherente y u n poco menor de calidad que A/V. Por favor jaga su conexión antes de e ncender e n sus dispositivos y conecte el cable terminado amarillo al AV-in de su TV y AV-out en el STB. Parecidamente, conecte el cab le termina do rojo y blanco con el Audio-in e n su TV y Audio-out e n el STB correspondientemente. Una vez que una conexión utiliza la opción d e RF o la opció n A/V se ence nder su TV prime ro y usted es su STB. El STB es encen dnido presionand o el botón de la energķa en el frente, o con el control remoto, enciend a el STB. Usted debe ve r un logo q ue apa rece en su TV mie ntras que e l STB se enciende. Puesto que la programación del canal es diferente en varias regiones, usted debe a justar su caja encima d el televisor con sus canales usando la caracterķstica de auto exploración. Aseg urece de que una antena conveniente esté conectada con la entrada de la antena, etiquetada como RF-in en el STB, y después de encender su TV y STB, presione el botón del menś en su control remoto. Utilice las teclas de cursor alrededor del botón OK para mover el camp o destacado a Canal-Explorar y presione OK. Usted puede necesitar reorientar su antena para alcanzar los mejo res resultados. Si usted tiene una antena externa, puede ya hab er sido orien tado tales que él punto a las estaciones del transmisor. Para ayudar en la orientación de su antena, un indicador de la intensidad de la seńal se puede encende r en el STB. Utilice el botón del menś y seleccione la intensidad de la seńal o seńale el artķculo de la calidad para demostrar una barra d e la ca lidad de la seńal en la pantalla. Aunque la TV digital darį una imagen muy cla ra cuando una se ńal se recibe en suficiente intensidad, una seńal débil causara salidas o sin imagen. Las esta ciones anįlogas acaban de ser recib idas co n ruido en el sonido y la n ieve en el cuadro, las transmisiones Digitales se pierd en o tienen bloques grandes de las imįgenes que faltan si la seńal del RF e s de intensida d o de calidad debil. Reorientando su antena o conseguir una antena de una me jor calidad puede soluciona r este problema. Algunos que encuentra n pued en requerir para obtener los mejores re sultados. Gracias por elegir una caja encima de l televisorTiva x y disfrute del mundo n uevo de la televisión Digital. PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn 欢 迎来 到 数字 电视 的 世界 所 有的 机 顶盒(STB)都 已在 工厂 做 过正 常 测试 ,如 果您 仍 遇到 问 题, 请按 照以 下 简 单 步骤 去 排除 首 先请 确 认您 的电 视 和机 顶 盒都 已插 上电 源 ,并 且 按照 以下 说明 用RF线或 A/V线 ( 端子 颜 色: 红白 黄 )将 机 顶盒 连接 到电 视 上。 另 外, 请别 忘记 给 遥控 器 装上 电池 。 选 择RF连接 : 机 顶盒 可 以通 过工 作 在RF模 式 连接 到 您的 电 视。在 此模式 下,请 将机顶盒 的RF-OUT 接 口连 接 到您 电视 的Antenna Input口。您的 电视可 调 到3或 4频道 , 同时 您需 要 用 机 顶盒 后 面的 拨动 开 关调 到 与电 视相 应的 频 道。 选 择A/V连 接: 如 果您 的 电视 装有A/V输 入 端口 , 有时 标注 为AV1或AVin, 那么 您可 以 选择 用A/V端 子 连 接电 视 获取 较好 的 图像 质 量。 像前 面提 到 的,由 于 RF连 接存在 一定局限 性,所 以 图 像质 量 要低 于A/V显示。 开 机之 前 ,请 先用 黄 色A/V线连 接 机顶 盒的AV-OUT口 和 您的 电 视AV-IN口 ,同样 的 , 用 红色 和 白色 音频 线 连接 电 视和 机顶 盒颜 色 对应 的 端口 。 连 接好 RF或A/ V线后 ,请 先 打开 您的 电 视,再打 开机顶 盒 。按 前 面的 电 源按键 (Power )启动 机 顶盒 , 或者 用 遥控器 开 机。 机顶 盒启 动 的时 候会 在 您的 电 视上 显 示TIVAX 标 示 。 由 于不 同 的地 区有 不 同的 频 道节 目, 您必 须 使用 自 动搜 索功 能来 设 置您 机 顶盒 的频 道。 请 确认 您 已将 适合 的 天线 连 接到 机顶 盒的 天 线输 入 端( 标示 为RF-IN) , 然后 打 开 您 的电 视 和机 顶盒 , 按遥 控 器上 的菜 单键( Menu),使 用 “OK ” 周围 的 方向 键 将光 标 到移 动 频道 搜索 (Channel-Sca n) 按下“ OK” 键。 您 也可以 调 整您 的 天线 方 向以 搜 到最 多 的频 道。 如 果您 有 室外 天线, 请确 认 天线 已 经指向 了 信号 发 射站 您 可以 使 用机 顶盒 自 带的 信 号强 度显 示功 能 ,帮 助 您调 节天 线的 方 向。 按 菜单 键 (Menu) 选 择信 号 强度 或 信号质 量 这一 项, 屏幕 会显示 一个 信号 质 量的 指示条 。 当 信号 足 够强 的时 候 ,数 字 电视 可以 提供 很 清晰 的 画面,但 信 号比 较 弱的 时 候会出 现 画面 停 滞或 无图 像 显示 的 情况 。如 果射 频 信号 强 度或 质量 不好, 模 拟接 收 会看到 图 像出 现 雪花 并听 到 杂音 , 数字 接收 则会 出 现图 像 停滞 或马 赛克。 请 重新 调 整天线 的 方向 或 使用 更高 质 量的 天 线来 解决 此类 问 题。为 了 获得更好 的接 受 效果 , 请多试 验 几次 。 感 谢您 选 择了Tiva x数 字机 顶 盒去 享受 数字 电 视的 新 世界。 PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn Table of Contents Tivax Digital TV Converter User Manual- Important Safety Instructions ..............1 Important Safety Information ..........................................................................2 Welcome to the world of Digital TV................................................................3~5 Tivax Set Top Box User Manual - Let's Get Started........................................7~9 How to Receive the Best Digital TV Signal with Your Antenna...........................10 1.1 Remote control ......................................................................................11 1.1.1 Installing the batteries.........................................................................12 1.1.2 Using the remote control .....................................................................12 1.2 Front Panel and Rear Panel Illustration ....................................................13 1.2.1 Front Panel......................................................................................... 13 1.2.2 Rear Panel ......................................................................................... 13 1.3 Connecting your Atsc Converter Box......................................................... 14 1.3.1 Connecting Antennas............................................................................14 1.3.2 Connecting to a TV Set.........................................................................15 1.3.3 Connecting to an Audio System............................................................ 16 2.On-Screen Menus.....................................................................................17 2.1 Auto Program.........................................................................................17 2.2 Manual Channel Set...............................................................................18 2.3 Password ..............................................................................................18 2.4 Parental control .....................................................................................18 2.5 Advanced Closed Caption.......................................................................19 2.6 Language..............................................................................................20 2.7 Auto Power Down Timer..........................................................................20 2.8 Smart Antenna.......................................................................................20 3. Troubleshooting ......................................................................................21 4. Specifications .........................................................................................22 5. Glossary..................................................................................................23 Tivax Limited Warranty To Original Purchaser................................................24 PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn Tivax Set Top Box User Manual - Let's Get Started! Congra tu la tions on purchasi ng your Tiv ax Set To p Box! Now you ca n st art to rece ive the amazing world o f Digita l Te levi sion on you r analog TV. First plea se r ea d t hese simple que stio ns. Question #1: W hat is a Tivax Set To p Box? Ans wer: It is a special re ceiver th at int erprets FREE Digital TV signals in to a nalog TV s igna ls. Question #2: If I can get ABC ® or CBS ® on my ca ble or sa te llite , why do I n eed a Tivax? Ans wer: Be cause you are o nly gettin g a FRACTION of the FREE signa ls. Cab le a nd satellite p ro vid ers a re no t requ ired t o g ive you all FREE Dig ital TV sig nals. Why should they? You mig ht b e ve ry pleased with bette r qua lity FREE Dig ital Televisio n. Tha t's th e “ se cret ” many peo ple do n ot know. Tiva x gives you immediate ac cess to FREE Digita l Television sig nals a t no extr a co st! Question #3: If I a lready h ave cable or sat ellite , do I st ill n eed a Tiva x to receive th e FREE Digita l Te levisio n signals? Ans wer: Unl ess yo u have a Digital TV set, YES. Don 't wo rry. You can combine you r Tiv ax with yo ur cable or satellite receive r. We'll sh ow you ho w. Question #4: Do I need an antenna to receive FREE Dig ital television signals? Answer: Yes. Digital TV is just like old-fashioned Analog TV, only better. Yo u still need an a ntenna to get the signal. Just about any antenna wi ll do, but an ant enna de signed f or Digita l TV is b etter. While so me antennas are better than others, it also depends on whe re you live. If you cann ot receive Analog TV signals, you will not be able to get Digital TV signals. This is very important as your Tivax will not work. Ques tion # 5: Ho w do I test my TV to see if I can use my Tiva x? Answer: This is very ea sy. Simply disconnect your An alog TV from yo ur cable o r satellite receiver. Connect t he antenna to your Analog TV. If you can rece ive a picture, your Tivax will work. Don't wo rry if the p icture is n ot perfect. That's a not her specia l feature of Digital TV. It's BETTER! Digita l TV signals d on't ha ve the same problems Analog TV sig nals d o. T ha t's why this n ew st and ard is so mu ch better! PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn OK. Yo u've now tested your Analog TV a nd de mo nstrate d you can get FREE TV signals without cable of sate llite. Now get ready …you are abou t to discover the wonderful world of FREE Digital T V! Before we get st arted, here are a few easy technica l terms you will need to know: What is Ana log Tel evision? Until recen tly, virtually all TVs in the USA we re de signed fo r Ana log Television. Analo g TV signals we re de signe d in the 19 40s, long be fo re computer technology existed . Analog TV is based o n an old standard called NTSC . Compared to Digital TV signa ls, t he An alo g picture is f uzzy and very inferior to Digital TV. Th is is why the US Government decided to t urn off Analog TV signals in 200 9. Analo g TVs ca nnot re ceive Digital TV sig nals. There are o nly 3 ways to see digital TV signa ls on your Analo g TV: 1 . You must have a Digita l TV set . Your Analog TV cann ot receive th e amazing wor ld o f digital t elevision 2 . You must have a Digita l TV tune r. Tivax is a Digital TV tuner. 3 . You must pay for cabl e or satellite (re member … cab le a nd satellite will not show you man y of the FREE signals yo u can receive with your Tivax). What is Digital Television? This is th e new broad cas ting standard. Digital TV signals are based on a new standard called ATSC. In early 200 9, all Analog TV signals will be tur ned off . This is Fed eral Law. Under the new Federal Law, cable and satellite may not be required to provide you access t o all the FREE digit al signals. Eventually, you will get some of these signals, but n o one knows for sur e when this will happen. It could be many more years bef ore cable or satellite decid e to give you access to all FREE Digital TV sig nals. Digital Televisio n is very exciting and offers too many features to be listed here. However, your Tivax Set Top Digit al Re ceiver gives you the ability to enjoy mo st of these ad vantages on your Analog TV set! PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn High Definition Television The High Definition Digital TV is similar to a co mput er da ta s ignal. It is also called HDTV. In othe r words, it is very sophisticated and can do man y more things. The broadcast station can do more interesting thin gs with a Digital T V signal, such as broadcast High Definition television. This is a very sup erior pictu re . You r Tiva x will e asil y decode the HDTV sig nal. You will b e able to watch HDTV on your Analo g TV. While you will NOT see the pict ure in its true High Definition format (o nly exp ensive High Definitio n TV sets can do t his), you will b e very surprised with the exc ellent picture qualit y. The Digital TV sig nal is very powerful. A broadcaster can do ma ny t hings with the Digital Television signa l. So metimes, when they want t o show y ou a ve ry high qualit y picture , they will transmit t he program in Hig h Defin itio n. When this happens, you will only get ONE Digital Televisio n signa l at that moment in time. A goo d example when this happens if d ur ing Prime Time (8 p m to 11 pm). Footb all and base ball games are commonly transmitt ed in High Definition. Multicast TV Signals The Digital TV signal is very powerful. A broadcaster can also choose to show you more than one TV signal on the same frequency. (Analog TV cannot do this!) A broadcaster can provide FOUR or more excellent quality signals AT THE SAME TIME! This is called “ multicasting ” . Tivax can decode this signal for you! A good example is during Day Time. Imagine signal #1 is dedicated to a soap opera, signal #2 is dedicated to a documentary, signal #3 is dedicated to a talk show and signal #4 is dedicated to a medical program. Only Digital TV can do this and Tivax can decode this for you! Standard Definition Television This refers to a TV picture that is NOT High Definition. When the broadcaster wants to show you more than one signal, they refer to this as Standard Definition (as opposed to HDTV). Standard Definition TV is also called SDTV. So. Are you ready to get started? PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn How to Receive the Best Digital TV Signal with Your Ante nna In this section we'll show you t he following: 1.How t o find Digital TV channels in your area 2.How t o se lect the best an te nna for your Tivax 3.How t o scan and store Digita l TV ch annels wit h yo ur Tivax How to find Digital TV channels in your area The number of Digital TV channels varies greatly within each local area, so it is best to look up your available channels by visiting special web sites, such as: www.titantv.com www.dtv.gov www.tvguide.com In addition, you can also find excellent local information from performing searches on the internet. Due to the proliferation of DTV channels, it is difficult to get the latest information from newspapers or other printed sources. In addition, the number of channels you receive depends on your physical location, your antenna and the location of the broadcast antenna. Broadcast television signals are “l ine of sight ” , which means the best signals are received by pointing directly at transmitter. Buildings, mountains and other obstructions will affect the quality of the signal you receive. Selecting Your Antenna After you have determined the available channels in your area, you will need to select an antenna. The mini-antenna provided with your Tivax will work in most cases, but it may not be your best option, depending on your location. Q. Can I use my existing indoor antenna? A. Yes, but it may not give you the best results. Most likely, your existing antenna was designed for analog television and is not designed specifically for DTV. If you get good results, great! (Be sure you connect the antenna to your Tivax.) Q. Can I use my existing outdoor antenna? A. Yes. This will be a much better antenna and provide you with a better DTV signal. (Be sure you connect the antenna to your Tivax.) Q. Do I need to upgrade my antenna? A. If you are not pleased with the results, then this is recommended. There are many new antennas designed for DTV and are available at most retail electronic and other stores where televisions are sold. If your antenna provides a fair signal, upgrading to a better quality DTV-designed antenna should help. Remember to point the antenna in the proper direction to receive the strongest signal. Your local retail center can provide the best advice to receive the strongest DTV signal. Scanning & Storing DTV Channels with Your Tivax After installing the antenna, point it towards the DTV broadcast transmitter or where there are the largest number of DTV stations. Now you can scan for DTV channels and store them. More information on how to scan channels is available in later parts of the manual. PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn 1.1 Remote Control Digita l TV CONV ERTER Tivax STB-T9 Remote Key Function: 1. MUTE: Press to mute or unmute the a udio outpu t. 2. GUIDE: Press to display the on-screen Electronic Program Guide (EPG). 3. CH+: Press to change the chan nels in non-menu state . 4. CH-: Press to c hange the chan nels in non-menu state . 5. I NFO: Press to display information about the channel being viewe d. 6. EXIT: Press to completely e xit from the on-screen me nus . 7. OK: While using the on-screen menus, press ENTER to activate (or change) a particular item. 8. : Press to move around the menu screens 9. PRE-CH: Press to return to the previous channel you viewed. 10. - : Press to input dash to select a channel, for example 14-1. 11. CAPTION: When a digital signal is received, Service1, Service2,... or Service6 can be selected. When an analog signal is received, CC1, CC2, CC3, or CC4 can be selected. 12. AUDIO: Press to select the available multi-tracks. (Depending on the particular broadcast, one or more foreign language translations might be available.) 13. STANDBY: Press to switch the Converter Box to on and off. 14. VOL+: Press to increase the output volume level. 15. VOL-: Press to decrease the output volume level. 16. : Press to move around the menu screens 17. MENU: Press to display the main menu or to switch back to the previous menu screen that was displayed. 18. : Press to move around the menu screens 19. : Press to move around the menu screens 20. NUMBER KEYS :Press to directly tune to a particular channel or input digits in menus. 21. ASPECT: Press to change the screen format (Normal/Zoom/Wide/Cinema) according to the screen aspect ratio and the input signal format. 22. SIGNAL: Press to show the signal strength. PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn 1.1.1 Installing the Batteries Remove the battery co ver from the remote con trol a nd pu t 2xAAA size batt er ies inside th e compa rtment. The d iagram inside the ba ttery comp artmen t shows the correct way to install the batte ries. 1.Open the c ov er 2.Install ba tteries 3.Close the cover 1.1.2 Using th e Remote Control To use the remote control, point it towards the front of the Digital Converter Box. The remote control has a range of up to 7 meters from the Digital Converter Box at an angle of up to 60 degrees. The remote control will not operate if its path is blocked. Sunlight or very bright light will decrea se the s ensitivity of the remote control. PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn 1.2 Front Panel and Rear Panel Illustration 1.2.1 Front Panel Di gi ta l T V Co nve rt e r 1 2 Tivax IR STB- T9 D I G I T L STA NDBY BU TTO N: Used to sw itch the set top b ox o n an d off. STANDBY INDICATOR: Used to visually show power state of the Digital Converter Box, the red LED will be o n if the Digital Converter Box en tered standby mode. 3 REMOTE CONTROL SENSOR: Used to receive the signal from the remote control. 4 . CHANNEL UP/DOWN: Use d to chang e the chan nels in the no n-menu state. 1.2.2 Rear Panel MODEL: STB-T9 Tivax DIGITAL TV CONVERTER POWER SUPPLY: 100-240V~ 50/60Hz MAX POWER CONSUMPTION: 8 WATTS ATSC RF IN 1 NT SC RF OUT 2 C ONF ORM S T O UL ST D C ERT IFIED TO C SA ST D .C 22.2 Serial No.: L CH 3 3 CH 4 S MART A NT. I/F 4 Th is dev ice compl ies with Part 15 o f the FCC Rules. Operatio n is sub jec t to the follo win g two cond itio ns: (1) this device ma y not ca use ha rmful i nte rferen ce, and (2) this de vice mu st acc ept a ny interfe rence rece ived , i nclu din g interfe re nce that ma y c ause un desire d oper atio n. V IDE O Video Out 100-240V~ 50/60Hz R SE RVI CE Audio Out 5 6 1 2 3 4 5 7 8 RF IN : Co nnect the antenn a or CATV cable h ere. RF OUT: This socket will transmit the NTSC CH3/4 RF signal to your TV ANT in socket. CH3/4 SWITCH: Se lect NTSC channel (Channel3, Channel4). SMART ANT I/F: Conne ct to an external smart antenna. AUDIO L/R: Con nect th ese terminals to the analog audio in puts of a TV set (i.e., to a TV that has jacks for L/R inputs). Or connect these terminals to the L/R inputs of a separate aud io compon ent. 6 Video output: Connect this jack to the Video Inp ut jack on your TV using an Audio/Video cable. This output port supp orts only the SD output. 7 SERVICE 8 MAIN POWER: Connect to main power supply using the power cord. PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn 1.3 Connecting The Digital Converter Box The following diagrams are of typical configurations only, and may differ slightly to your existing external equipment. If you are unsure how to connect to your Digital Converter Box, always consult your manufacturer's user manual supplied with your equipment. 1.3.1 Connecting Antennas This section tells how to connect an indoor or outdoor antenna to your Digital Converter Box. You may need a 75Ω adaptor or a combiner. NOTES: A. If your antenna has separate leads for VHF/UHF signals, you will need to purchase a combiner to combine it before connect to the receiver. B.The Digital Converter Box can receive DTV signals in the event that a local cable provider is passing 8VSB through on their system. (8VSB is the RF modulation format utilized by the DTV(ATSC) digital television standard to transmit digital bits over the airwaves to the home consumer.) C. When Receiving Digital Cable Signal : If your cable service signal does not comply with the ATSC requirement, this product may not operate properly. PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn 1.3.2 Connecting to a TV TV Aerial (For smart antenna only) ATSC NTSC RF IN RF OUT L CH 3 CH 4 SMART ANT. I/F VIDEO Video Out R Audio Out SERVICE 100-240V~ 50/60Hz Composite Video White RED Yellow VIDEO IN RF OR VIDEO AUDIO IN R L RFIN PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn 1.3.3 Connecting to an Audio System ATSC NT SC R F IN RF OUT VIDE O Video Out L CH 3 CH 4 R Audio Out SMART AN T. I/F SERVICE Am plifier VOLUME INPUT SELECTOR P OWE R BYPASS PRO LO GIC 3 STERE O MODE TEST CH ANNEL KARAOK E MUT E DOWN BASS 1 MIC 2 1 MI C VO L 2 MIC TREBLE UP ECH O EXC IT E PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn 100-240V~ 50/60Hz 2. On-Screen Menus Ensure all connections have been made following the diagrams on the previous pages for reference. When you plug the power cord of this set-top box into a power outlet and press the POWER switch on the front panel, the box will be turn on for the first time. Press STANDBY button on the remote control will switch the set-top box to or from standby mode. Turn on the TV set and switch it to external AV mode, you will see the picture come from the box. If it is the first time you use this device, an Auto Program menu appears to let you to scan all the available channels in your area. Ini tial Set up Menu Menu Language En gli sh A uto Prog ram To Mo ve OK To S ele ct Ex it To E xit Main Menu Press the MENU button on the remote control, the main menu will display as below. the Auto Program focus is highlighted as default. Main Menu Aut o Program Manual Channel Set Pas sword Parental Contr ols Adv anc ed C losed Capt ion Language English Aut o Power Down Timer Off Smart A ntenna To Move OK To Se lec t E xit To Exit 2.1 Auto Program If it's th e first time you us e th e box, you sho uld sca n a ll th e TV ch anne ls f irst, press t he a rro w butto ns t o move the curso r to Au to Program in main menu , press t he OK bu tt on to confirm, yo u will see be low menu wh ich indi cate s au to se arch is in p roce ss. Af ter all ch anne ls in your a re a a re fou nd, you will see th e first foun d ch anne l showin g on the scree n. Any time if you wan t to start auto ch anne l se arch aga in, you can follo w the above p ro cedu re . Autoprog ra m Menu Autoprogram M enu Per forming First Pass Digital Channels Found Progress (%) 14 Scan ning 0 Searching digital channels Digital Channels Found Progress(%) 69 PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn Ch ann el 17 0 2 .2 Ma nual Chan nel Set Y ou ca n h ighlig ht this item and press OK butt on to con firm it, yo u will se e be low menu showing on screen. You ca n sp ecific t he selected cha nn el “Viewable ” o r “No t viewa ble ”, th e not vie wab le channels will be skip ped when you do zappin g next time. Manual Channel Set Menu Ch 14-1 AT SC-1 Viewable Ch 14-2 AT SC-2 Viewable Ch 14-3 AT SC-3 Viewable To Move OK To Selec t Exi t To Ex it 2 .3 Pas sword W hen th is item is high ligh te d, p ress the OK b utton will e nter th e Enter Old Pa sswo rd menu a s below. Enter Old Password W hen you ente re d the corr ec t pa sswo rd (the de fault password is 6 666), the Enter New Pas sword and Con firm New Pass word will pop up sequentially, if the new in put passwords verified successfully, the Password Chan ged message will pop up in the righ t up corn er. 2 .4 Parent al Control W hen th is item is high ligh te d, p ress the OK b utton will e nter th e Enter Pa sswo rd menu, you will enter the Pa re nta l Control Menu as bel ow if the passwo rd you e ntered is co rrect. This device support 2 ratin g syst ems used in th e Unite d State s: 1 ), The Motion Picture Associa ti on of America's (MPAA) ratin gs include th e f ollowin g rating s: G (General Audie nces-All Ages Admitted) , PG (Parent al Guid ance Su ggested. So me Mate rial May Not Be Suitable For Children ), PG-13 (Pa re nts St ro ngly Ca ution ed. Some Materia l Mayb e In approp riate For Childr en Und er 13 ), R (Restricted, Un der 1 7 Requ ires Accompa nying Pare nt Or Adult Gu ardia n), NC-17 (No One 17 And Under Ad mitte d). PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn 2 ),The TV Ra ti ng sys te m inclu de th e fo llo wing ratin gs: TV-Y ( all child re n) an d TV-Y7 (d irected to old er children ), TV- G (ge neral audience), TV-PG(p arental g uida nce sug gest ed), TV-14 (p arents st ro ngly ca ution ed), an d TV-MA(mature a udie nce s on ly). Th e le tt ers FV (Fan tasy Viole nce ), V(moderate Viole nce), S (mild Se xual situatio ns), L( mild co arse Lang uage ), D (mature t heme s sugg est ive Dialogu e) were adde d to indic ate the presen ce of viole nce , se x, langua ge, sugge stive d ialo gue respectivel y. Parental Control Menu MPAA ALL NONE TV RATING FV L S V D NONE G TV-Y PG T V-Y 7 PG-13 TV-G R TV-PG NC-17 TV-14 X TV-M A To Mo ve OK To Select Exi t 2.5 Advanc ed Clos ed Caption When this ite m is h ighlig hted , press th e OK bu tto n will en te r the Adv ance d Closed Caption me nu as belo w. Advanced C losed Caption Style Cu stom No rma l De fa ult White Size Fon t Text Co lor Text O paci ty Backgro und Col or Flas hing Black Backgro und Op acity Solid Edge Effect No ne Edge Color Re d CLOSED CAPT ION SAMPLE To Move OK To Sele ct Exi t To Exit If you choo se t he Styl e as Auto matic , the cap tio n Size/Font/Text Co lo r/Tex t Opa city/Back gro und Color/Ba ckground Opaci ty /Edge Effect/Edge Color will be set to Au toma tic a lso , and you will se e help in formation DECIDED BY BROAD CASTING at the bottom of t he menu . If you choo se t he St yle a s Cus to m , yo u will se e he lp informa tion CL OSED CAPTION SAMPLE a t the bottom of the men u, you can cha nge a ll above ca ption relate d p aramet ers sepa ra tely as you want. PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn 2.6 Language When this item is h ighlig hted, you ca n pre ss OK bu tton t o ch an ge the OSD men u lan gu age as yo u want, there a re 3 options: English, Spa nish, Fre nc h. 2.7 Auto Power Down Timer When this item is h ighlig hted, press th e OK butto n yo u can cho ose th e o ption s: Off, 2 hours, 4 hours. th e r eceiver will ente r stan dby mod e a cco rding to the specific setting if the latter 2 o ption s chose. 2.8 Smart Antenna When this item is h ighlig hted, press th e OK butto n yo u can enter th e b elow menu if a smart an tenna is prese nted at t he rear pan el o f your box, S ma rt Ant en n a Men u Cha n ge An te n na Posit io n 1 A uto m at ic Po sitio n Ad jus tm on t S ave No w Posi tio n To M ove OK To S ele ct Exi t To Exit If the smart an tenn a not prese nted you can no t en ter abo ve me nu, yo u will see bel ow No Smart Antenn a Detecte d message. No S mart Anten na D elected PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn 3. Troubleshooting Q: It tak es a wh il e to d isplay picture o n the s creen af te r tu rni ng power on or af te r changing channel . A: It will ta ke several seco nds for this re ceiver to sho w the logo or pi cture after p owe r on sincee t he system have to finished the initialization of t he main chip a nd de mo du lator. In case of dig ital b ro adcastin g, it cou ld t ake 1 t o 2 seconds to rece ive data. Therefo re , it is no t a fau lty receiver if the p ictur e display is d el aye d. Q: There i s n o picture on the sc re en. A: Make sure the power is o n. Make su re the ca ble be twe en the re ceiv er a nd th e TV is co nnected properly. Make su re the T V's ext ernal vid eo input mode is se lecte d co rr ectly. Make su re the vid eo ou tput is selected correctly. Make su re the ante nna is p ositioned cor re ctly. Try tur ni ng t he re ceiver off and then back on ag ain. Q: Poor v id eo quali ty or scree n flick ering . A. Th is is a resu lt o f a p oor b ro adca st sign al. Rota te the an te nna to a differen t dire ction . Q: No Sound. A: Make sure the cab le b etween the re ceiver an d the TV aud io jack or you r a ud io system is con nect ed p roperly. Try p re ssing t he MUTE button on the re mote . Try p re ssing t he VOL+ but to n o n th e remote contin uously. Try tur ni ng t he re ceiver off and then back on ag ain. Q: The rem ote co ntrol does not work . A: Make sure the re is no obst ru ction bet wee n t he re mote con troller and th e remote sensor of the re ceiver. Make su re the dista nce an d deg ree is no t ou t of range. Check to insure th e b atterie s are ins talle d corre ctly. Ins tall a pa ir o f new b atterie s. PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn 4. Specifica tion Product Name Digital TV Converter Power Supply Input Voltage: 100 - 240V~ 50/60Hz Power Consumption:Maximum 8W,Standby <1W. Decoder Video Format: Standard definition CVBS. Audio Format: Dolby Digital audio R F Signal Input/Output ATSC Antenna/Cable RF In: F-Connector NTSC Ch3/4 RF out: F-Connector Antenna Impedance: 75 Ohms Channels: VHF 2 -13 , UHF 14 - 69 Smart Antenna interface Video Outputs Composite Video Output for standard analog sets: RCA Connector Audio Outputs Analog Audio Outputs (L/R): RCA Connectors Service Software upgrade through RS-232 port: 9 pin D-Sub type PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn 5. Glos sary ATSC: “Advanced Television Systems Committee.” Formed to establish technical standards for U.S. advanced television systems. Also, the name given to the 8-VSB transmission standard itself. NTSC: "National Television Systems Committee" and the name of the current analog transmission standard used in the U.S., which the committee created in 1953. Analog TV: Analog technology has been in use for the past 50 years to transmit conventional TV signals to consumers. "Standard" television broadcasts in analog TV. Analog signals vary continuously, creating fluctuations in color, brightness and quality. Digital Television (DTV): Digital TV is the umbrella term encompassing High-definition Television and several other applications, including Standard Definition Television. SDTV: "Standard Definition Television." Digital formats that do not achieve the video quality of HDTV, but are at least equal, or superior to, NTSC pictures. SDTV may have either 4:3 or 16:9 aspect ratios, and it includes surround sound. Variations of fps (frames per second), lines of resolution, and other factors of 480p and 480i make up the 12 SDTV formats in the ATSC standard. HDTV: "High-definition Television." This is the most superior video picture available in Digital TV. In the U.S., the 1080i and 720p formats in a 16:9 aspect ratio are the two acceptable HDTV formats. HDTV is a component of DTV. Dolby Digital: This is a digital surround sound technology used in movie theaters and upscale home theater systems that enhances audio. Home theater components with this technology work in conjunction with a "5.1-speaker" system (five speakers plus a low-frequency subwoofer) to produce true-to-life audio that draws the listener into the onscreen action. Six discreet audio channels are used: Left, Center, Right, Left Rear (or side), Right Rear (or side), and a subwoofer -- LFE, "low frequency effects" -- (considered the ". 1 " as it is limited in bandwidth). Smart Antenna: A smart antenna system combines multiple antenna elements with a signalprocessing capability to optimize its radiation and/or reception pattern automatically in response to the signal environment. PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn Tivax Limited Warranty To Original Purchaser Tivax warrants this p roduct purchased in the USA against defects in material and workmanship for a period of 3 months from the date of purchase under normal use and se rvice. Products will not be warranted if the serial number is removed or defaced. This warranty shall be void upon transfer of ownership of this p roduct and is effective only when used in the United States, excluding U.S. Territories. Tivax agrees to r epair or replace this unit at no charge, within the warranty period, providing that the prod uct is delivere d to Tivax in its original pa ckage o r equivalent, fully insured, with all shipping ch arges prepaid and a return authorization number listed on the outside of the packaging. A handling charge of $25 will be applied to any returned product found not to be defective. To honour this warranty and to ensure the best service to our cu stomer, Tivax requires the following information to be included with the returned unit: A copy of the original sales invoice from your vendor. Model number & seri al number of the unit. A detailed description of the problem, associate electrical connection and hardware. A Retu rn Authorization number c an be obtained by faxing to 65 0.240.3950 or emailing [email protected] p rior to returning the unit. This warranty contemplates the owner will reasonably maintain this instrument or product without alter at ion, negligent use, misu se, or abuse. Furthermore, any unauthorized alteration of this device without written approval by Tivax will void any warranty and the owner's right to operate this device. This warranty presented above is exclusive and in lieu of all other expressed or implied wa rranties. Any warranty applicable to this product is limited to the period described above. In no event will Tivax be liable for any special, incidental, or consequential damage, loss of revenue, or cost of replacement goods resulting from the use of malfunction of this product to the equipment system on which it is used. This warra nty gives specific legal rig hts and you may have other rights that vary from state to state. PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn Michley Electronics Inc. U.S.A www.tiv ax.com PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn