Download Manual - ITM Instruments Inc.

Remote Display True-rms Clamp Meter
Features
Backlight
Push  to toggle the Backlight on and off. The Backlight automatically goes off after 2 minutes.
To disable the Backlight Auto Off feature, hold down  while turning on the Meter.
Display Hold
To capture and hold the present display reading, push  while taking a reading. Push 
again to return to the live reading.
MIN MAX AVG
Min Max Avg mode can capture the minimum, maximum, and average readings of a given output
signal over an extended time.
Push  to enter Min Max Avg mode, push again to toggle between min and max readings.
Push a third time to display the average reading. To exit Min Max Avg mode, push and hold 
for 2 seconds. When Min Max Avg mode is active, the Auto Power Off feature is disabled.
DC Current Zero
Push  to remove any dc offset that could affect the accuracy of dc readings.
11
1.800.561.8187
www.
.com
[email protected]