Download IC-V80/IC-V80E SERVICE MANUAL

M ENTERING ADJUSTMENT MODE
1) Turn the power OFF.
2) Connect the JIG cable "#1" (See the page 5-1) to the [SP] jack.
3) While pushing [Y], [Z] and [VFO/MR/CALL], turn the power ON.
To [SP]
JIG cable “#1”
(See the page 5-1)
[ ]
[ ]
[VFO/MR/CALL]
M KEY ASSIGNMENTS FOR THE ADJUSTMENT MODE
Adjusts the value for the item
Adjustment frequency
TX power
Adjustment item
Selects next adjustment item
(without storing value)
Selects previous adjustment item
Stores adjustment value
Starts automatic adjustment
M QUITTING ADJUSTMENT MODE
1) Turn the power OFF.
2) Disconnect the JIG cable "#1," then turn the power ON.
5-2