Download Tender Document

Page 97 of 106
•
•
•
•
One (1) long sweep tee
Two (2) 4” 90 degree long sweep elbows
Three (3) 4” fig 1002 hammer unions
One (1) 6 ft x 6 ft base for mounting ground manifold
7. PUMP DELIVERY LINES:
Two (2) 4” Pump Delivery Lines of suitable length with Fig 1002 hammer unions at each end
8. KILL LINE & FILL LINE:
Kill Line kit for field installation consisting of:
• 2” XXS pipe of suitable length (to be specified by the bidder)
• Three (3) 2” x 6000 PSI Style 50 Swivel Joints
• Two (2) 2” Fig 1002 Hammer Unions
Low-pressure Fill Line of suitable length (to be specified by the bidder) with 2” Fig 1002 Hammer
Union at each end
9. BELL NIPPLE:
One (1) Bell Nipple, funnel & telescoping style, mounted in the substructure with flange to match
BOP flange
10. FLOW LINE:
One (1) 10” to 12” Flow Line from Bell Nipple to Shale Shaker Unit complete with butterfly valves
and couplings
11. RATHOLE ASSEMBLY:
One (1) Rathole assembly with digger unit or suitable mechanical device for drilling rat hole and
mouse hole complete with suitable size scabbards.
12. MOUSEHOLE SCABBARD ASSEMBLY:
One (1) Mousehole Scabbard Assembly
13. CATWALK ASSEMBLY:
One (1) Two-piece Catwalk Assembly (3.5 ft to 4 ft wide x 40 to 50 ft long x 3.6 ft high) with built-in
stair and provision to hinge pipe rack on each side.
14. PIPE RACKS:
One (1) lot of twelve (12) Triangular Pipe Racks, 3.1/2 ft x 3.1/2 ft x 14 ft long, fabricated from Sch
160 pipe, for stacking tubular with suitable provisions to hinge with catwalk assembly.
15. CELLAR PUMP:
A. Gorman Rupp make diaphragm pump of model 4DB or similar pump having same capacity driven by
explosion proof electric motor with matching frequency complete with all suction and delivery lines
mounted on a 1 feet high suitable oil field type skid, for cellar cleaning purpose. Pump should be
suitable for class I, dir. 2 areas and gas group I, IIA & IIB and with Flexible coupling. [Alternately, a
suitable cellar ejection system may be offered]
B. Vertical Type Vortex Pump (Make: Flygt)
Model: H 8044 (complete package with control & monitoring data)
16. FUEL TANK & PUMPS:
One (1) 40 KL Capacity Skid Mounted, Cylindrical, Horizontal Diesel Storage Tank fabricated on heavy
duty oilfield type skid (length with skid should not exceed 9.0 mtrs.) with standard accessories such