Download Inserti a legna Wood burning inserts

Transcript
Cause
Remedy
Quantity of wood less than necessary
for nominal efficiency
Use the quantity of wood indicated
in the instructions (See “TECHNICAL
DATA” paragraph).
Undersized grate for the environment
to be heated
Integrate with another product.
Inadequate
insulation
for
the
environment in which the firebox is
installed
Insulate well with suitable materials.
Oversized fresh air intake
Decrease the intake section (See
“TECHNICAL DATA” paragraph).
Door opened too fast
Keep the door just ajar for a few
seconds before fully opening.
There are still flames
Only open the door when just embers
remain in the grate.
Not much air and heat comes out from
the slots
One of the two fans may be faulty
Contact the authorised Technical
Support Centre.
The fan does not work (*)
Incorrect connection to power supply
Correct the connection according to the
assembly diagram.
Electronic regulator damaged
Replace the regulator.
Power failure
Power the appliance.
Presence of dust or similar in the fan
Clean the fan.
Vibrations
Check fan position.
Worn rotating parts
Maintain or replace worn parts.
Replace the fan.
The firebox does not heat
Smoke comes out upon opening the
door
Noisy fan (*)
English
Problem
aa(*) Pursuant to current regulations on the safety of electrical equipment, you must contact a Piazzetta After-Sales Service Centre or
a qualified electrician for all and any work connected with installation, maintenance or servicing that involves access to electrical
parts.
H07029410 / DT2001173 – 00
57