Download MANUAL MC OK

Installing the Grass Catcher
1
- Hooks to couple
the grass catcher
2
- Holes to couple
the hooks
3
- Grass catcher
4
- Coupling pin
5
- Base collector tube
1
2
5
4 3
Blade Balancing
Note:
ENGLISH
To check the balance of the blade,
place a round tube in the blade hole
and check whether the blade is
balanced as in the picture at the side.
If it is not, balance it by sharpening the
cutting area until the removal of
material reestablishes the balance of
the blade.
38
Atenttion!
To do this, disconnect the plug
cable, being careful to incline the
equipment with the spark plug
upwards, avoiding oil from the
engine entering into the air filter
and carburetor. Never incline it
sideways or forwards.