1
Download installation - Master-Bilt
Transcript
11. The parameters list is displayed PASTA +37°F 01/03/2010 19:00 NEEDLE +70°F AIR +70°F MENU HACCP VIEW PRINT BY DATE NOTE: the printer is not supplied as standard equipment. It is an optional item. Connect the printer from the rear of the unit, using the MATE-N-LOK connectors on the electrical panel, identified with the letters R (power) and S (signal). 6. Press the knob to enter the selected function 7. Select the chosen function by rotating the knob 8. Press the knob to enter the selected function 9. Enter the data by turning the knob and press to confirm the value and move to the next one until ENTER is selected VIEW PRINT USB DELETE MENU HACCP BY DATE BY CYCLE ALL MENU HACCP PRINT BY DATE BY CYCLE ALL FROM TO MENU HACCP PRINT 01/03/2010 02/03/ 2010 MENU HACCP PRINT ENTER 10. Press the knob to start printing FROM TO 01/03/2010 02/03/2010 MENU HACCP PRINT ENTER 11.Printing in progress IN PROGRESS MENU HACCP PRINT PRINT BY CYCLE NOTE: the printer is not supplied as standard equipment. It is an optional item. Connect the printer from the rear of the unit, using the MATE-N-LOK connectors on the electrical panel, identified with the letters R (power) and S (signal). 6. Press the knob to enter the selected function VIEW PRINT USB DELETE 43 MENU HACCP 3299720 /160555_GB
