Download Manual Justsalt Pro
Transcript
2 ADDING SALT Ideal concentration of salt at the season’s start = 4 kg/m3. Starting up : salt quantity = 4 x pool’s volume in cubic meter (m3). Salt additive : Quantity of salt to add (in kg) 3 Pool’s water volume (m ) Actual salt rate 3 (Kg/m ) 30 40 50 60 70 80 90 100 110 120 0 0,5 1 1,5 2 2,5 3 3,5 4 4,5 150 135 120 150 90 75 60 45 30 15 200 180 160 140 120 100 80 60 40 20 250 225 200 175 150 125 100 75 50 25 300 270 240 210 180 150 120 90 60 30 350 315 280 245 210 175 140 105 70 35 400 360 320 280 240 200 160 120 80 40 450 405 360 315 270 225 180 135 90 45 500 450 400 350 300 250 200 150 100 50 550 495 440 385 330 275 220 165 110 55 600 540 480 420 360 300 240 180 120 60 The salt used should be of standard quality, in pellet or granular form, such as that recommended for water softeners. It is not necessary to use stabilised salt. Directly add the salt into the pool (place the bags of salt around the pool) and leave the filtration on manually for 24 h (the device should be turned off). 3 SETTING OF THE CHLORINE PRODUCTION The chlorine production of the device adjusts in percentage of production, from 0 to 99 (100 %), using Measure the free chlorine level in the pool with your usual analysis kit. The free chlorine should be higher than 1 particle by million. If the free chlorine is less than 1 particle by million set the device to 99 (100%) position and let it operate continuously until a sufficient concentration has been reached (from several hours to several days). When the chlorine level exceeds 1 particle by million, set filtration to "AUTO" and adjust the filtration time according to the table below : T (°C) 16 18 20 22 24 26 28 30 more Time (h) 8 9 10 11 12 13 16 19 24/24 Adjust the % of production in order to maintain the free chlorine level in the pool between 0,5 and 1 particle by million. In the starting up, adjust with the following values in first approximation : 3 Modèle 60 m 3 Pool volume (m ) % Setting 3 60 m 99 3 55 m 90 3 50 m 80 3 45 m 70 3 40 m 60 3 Modèle 90 m 3 Pool volume (m ) % Setting 3 90 m 99 3 85 m 90 3 80 m 80 3 75 m 70 3 70 m 60 3 Modèle 120 m 3 Pool volume (m ) % 3 120 m 3 115 m 3 110 m 3 105 m 3 100 m Setting 99 90 80 70 60 Note: every pool use is different, you may need several tries to determine the value the most adapted to your situation. JUSTSALT UNO - JUSTSALT DUO - JUSTSALT PRO - PAPI004084MULTI1 - FR/EN/ES/IT - Rev.05.13 35