Download Multimedia Interface Bedienungsanleitung Instruction manual 1289

14
Now, the fibre optic connection from the Quad Lock plug can be removed (Fig. 8, 9). This is to be involved in
the included adapter, so that the optical fibre connection is directly connected to the navigation computer (Fig.
9). Connect the included adapter plug ‘n’ play between the navigation computer and vehicle harness.
E
N
G
L
I
S
H
picture 8
picture 9
The module integration is now complete. Find a suitable location for housing of the module. When routing the
cable set please ensure that no wires are pinched or damaged. Check all cables connected to accurate and
tight fit
Note: If the electrical system voltage drops down (battery) the interface will enable for security reasons
in a sleep mode. To re-enable the interface is separated from its connector and connect it again.
Activation - Deactivation
The function of the module can optionally be enabled or disabled via steering wheel remote control.


Activation: "Arrow Up" - button for a period of approximately 12
seconds and hold.
Deactivation: "Down Arrow" - button over a period of approximately
12 seconds and hold
Copyright © by Audiotechnik Dietz® Vertriebs-GmbH ● Germany
Rev 0, Stand: 03 / 2010