Download BT DRF-01 - Meerheim

2.
First Installation
This section will guide you to set up your thermostat
for the first time.
2.1
Batteries installation
- Open the two side’s covers and Insert the 2 AAA
Alkaline supplied batteries (or remove the small
protection sticker if the batteries are already
installed in the compartment)
- Close the two side’s covers.
- Now your thermostat will propose you to do the
following adjustments
2.2
RF installation
- First of all to configure your thermostat with the
receiver, you must put your receiver in « RF init ».
mode. (please refer to the receiver leaflet for this,
only the RF receiver of the same range are
compatibles)
12