Download User's Manual - SICES Brasil LTDA

The figure shows the supervision window that allows for detailed analysis of the board. When
displayed, the title bar shows the name associated with the board.
The displaying area shows the status of all the inputs and outputs (allowing for
activation/deactivation), the position of the two dip switches on the board and the status of the
non-volatile memory (which contains some configurations such as IP addresses, etc.)
To activate an output, click on its On button. To deactivate it, click on the Off button. A
confirmation message will be displayed.
To carry out the signal activation/deactivation directly without confirmation, click while holding
the CTRL key pressed.
The menu bar and the toolbar feature the same controls:
70
User’s Manual

Exit: closes the window.

View - Synoptic: it allows displaying the board general supervision pages (see
previous figure). This function is always displayed and enabled. No access level is set
for this control.

View - Events (PC): it shows the general window (see 6.2.2.1) to manage the data
recorded "upon variation" by the PC. This function is always displayed and enabled.
No access level is set for this control. The stored events correspond to the inputs and
outputs especially configured for this purpose.