Download Market Participant Graphical User Interface User's Guide
Transcript
5. Tutorials IMO_GDE_0003 Energy Bid Submission (HTML) Energy Bids are submitted for Load Resources. These can either be Dispatchable Loads within Ontario or Offtake bids that result in energy being dispatched outside of Ontario. If an Offtake bid is submitted, the resource type must be a CSP-SINK and a Tie Point must be defined (see Appendix A for a list of CSP’s and MSP’s). This tutorial does not cover the submission of Offtakes. 1. Select the RTEM Market Tab. 2. Ensure that the Delivery Date is tomorrow. 3. Select SUBMIT from the Action pull-down box. 4. Select NO from the Standing Flag pull-down box. 5. Enter the Daily Energy Limit. 6. Enter the Operating Reserve Ramp Rate. 7. Select LOAD in the Bid/Offer pull-down box. 8. If known, enter the name of the Resource to be used as the Pricing Point. If unknown, press the ‘-i-’’flag and choose from the list of resources available. 9. If the bid were an Injection or Offtake, the Tie Point ID field would be populated with the appropriate Tie Point ID name. 10. If the Bid were an Injection or Offtake, the NERC Tag ID field would be populated with the allocated unique NERC Tag ID. 11. For hours 1 through 12 inclusive, select the Hour checkbox. 12. For each of the checked hours, enter a bid, for example: (40,0),(40,5),(30,10),(25,15),(20,20),(15,25),(10,30),(5,40) Note: The following basic rules apply for a Bid: a) The first price and second price must be the same. (40,0),(40,5)… b) The first quantity must be zero. (40,0),(… c) The Prices must always decrease. …),(30,10),(25,15),(… d) The Quantities must always increase. ),(30,10),(25,15),(… e) There is a minimum of 2 price-quantity pairs for each hour. f) There is a maximum of 20 price-quantity pairs for each hour. For each of the checked hours, enter a ramp rate, for example, (5,5,5),(20,5,4),(40,5,5) 102 Public Issue 7.0 – June 1, 2005