Download Operating Instructions Dishwasher G 2432

Transcript
Frequently asked questions
Issue
Possible fault
Solution
Dishes are not dry, The rinse aid setting may be Increase the dosage, refill
glasses and cutlery too low, or the rinse aid
the reservoir or switch the
are spotted.
reservoir is empty.
rinse aid product when
refilling, see "Before using
for the first time".
Leave dishes in longer, see
Dishes were taken out too
soon.
"Use".
Set the Detergent setting for
A "Tab" product was used.
These products have a low a normal detergent and add
drying effect.
rinse aid.
The "Tab" setting is turned
on, but a normal product
was used.
Not enough rinse aid was
used.
Set the Detergent setting to
the detergent used, see
"Additional options - Tab".
Increase the dosage, see
"Before using for the first
time".
Refill the salt container, see
"Before using for the first
time".
The salt container lid was
not correctly screwed on.
Unsuitable "Tab" products
were used.
The automatic water
softener unit is defective.
Reseat it making sure it
screws back on correctly.
Change detergent, use
normal detergent.
Contact Miele’s Technical
Service.
White residue is
visible on cutlery
and dishes.
Clouding occurs on The salt container is empty.
glassware and film
can be wiped off.
40