Download RACK PAL INSTALLATION MANUAL

RACK PAL INSTALLATION MANUAL
o 0
© Di |
|® ©
© 0
© O
www .cogan.com
Copyright © October 2008, Cogan Wire and Metal Products Lid.
All rights reserved o,
Cogan’ raster
LEANER.
BETTER:
ANCHORING
RP40 L/R
1 Model # : RP24 L/ R
| RP48 L/R
existing racking
€—4 1/23
— 24" - 40° - 46° >
25/0”x4 1/27 min bolts
Hammer drill a hole (anchors) are used
same nominal diameter 9 for baseplates
and at least as deep 0
as the lenght of anchors
Drive the hilti bolt in the hole
so that at least G threads are
below the top surface of fixture.
Then thighten to the recommended
torque value to achieve proper
anchor setting Na
Clean hole wıth =)
blow out bulb