Download PUTTiT Vaporizer - User Manual, Warranty

PUTTiT Vaporizer - User Manual, Warranty Information, & FAQ's
1. Remove Mouthpiece Cap to turn the PUFFiT Portable Vaporizer "ON"
2. Twist off the PUFFiT Portable Vaporizer Top Cap in a counter clockwise motion then place your blend
inside the Filling Chamber. (For best results, use only finely grounded dry blend and tightly pack)
3. Set the Desired Temperature by turning the Temperature Wheel on the bottom right side of the PUFFiT
Portable Vaporizer (Levels 1-8)
4. Activate the Heat Cycle by Pushing Firmly on the PUFFiT Portable Vaporizer Top Cap for 2 seconds.
5. Wait for the PUFFiT Portable Vaporizer to heat up. The LED will flash Red while Heating for 30 seconds.
6. Take slow, steady breaths for 10-14 seconds. The PUFFiT Portable Vaporizer will return to standby mode
after 15 seconds.
7. Repeat steps as desired.
How To Use - YouTube Video: http://www.youtube.com/watch?v=nbCoupMPWdA&feature=player_embedded
How to Clean - YouTube Video: http://www.youtube.com/watch?v=v4bLamOBvsk&feature=player_embedded