Download No Touch Exit Sensor INSTALLATION MANUAL
Transcript
INSTALLATION MANUAL No Touch Exit Sensor PTE-300SQ / PTE-500SQ Features & Application: No touch / Touch free Exit Sensor (Diffused Detection) High capacity of relay dry contact (3A/AC120V,DC30V) Optical / Infrared Technology Normally open/Normally close/Common relay output IP-55 Ingress Protection / SUS 304 Stainless steel Plate Twin led indicators for sensor standby or approached: User friendly (Healthy protection): (1) Sensor Standby: BLUE LED ON Free from contagious diseases spread (2) Visitors whom approached to the sensor in 10 cm: RED LED ON Detection range: 0.1 ~ 10 cm Application: Gate/Door/Exit/Automation control Included: Specifications: Contact Rating: 3A/AC120V,DC30V Input Volt.: DC 12V Simple and clear for operation. Operation temperature range -20 55 Life: 100,000 Times Durable stainless steel plate Dimension: 115 x 70 x 29(mm) PTE-300SQ / PTE-500SQ Weight: 85g SCREWS Dimensions & Part Account: 86 43.5 4 3 2 1 55.5 86 6 60 Front View 10 5 26 Side View Back View 1 1. Lens: Black finish 2. Round Shape Led Indicators 3. Lens Holder: Silver finish (Same finish as Metal Plate) 4. Metal Plate: Silver finish (SUS 304 stainless material) 5. Lids: Bottom casing for diffused sensor 6. Rubber ring for wiring connection Wiring Connection: 5 PINS PTE-300SQ Wiring Connection Input Volt. 8 PINS DC 12V( ) (DC 12V ) 1c relay Output (NC) (COM) (NO) PTE-500SQ Wiring Connection 2c relay Input Volt. Output1 Output2 DC 12V( ) (DC 12V ) (NC) (COM) (NC) (NO) Installation: (COM) (NO) Sensing Range: WALL 10cm LED Indicator: Power OFF Power On Relay Not Energized Power On Relay Energized A B A: Black PC Lens B: Round Shape LED Indicator White (Round Circle) Blue LED indicator ON (Round Circle) 2 Red LED indicator ON (Round Circle)