Download DCY 7402 GXB2 Dryer User Manual
Transcript
Dryer User Manual 2960311067_KM/280415.1431 DCY 7402 GXB2 Please read this user manual first! Dear Customer, Thank you for preferring an Beko product. We hope that your product which has been manufactured with high quality and technology will give you the best results. We advise you to read through this manual and the other accompanying documentation carefully before using your product and keep it for future reference. If you transfer the product to someone else, give its manual as well. Pay attention to all details and warnings specified in the user manual and follow the instructions given therein. Remember that this user manual is also applicable for several other models. Differences between models will be identified in the manual. Explanation of symbols Throughout this user manual the following symbols are used: C A B Important information or useful hints about usage. Warning for hazardous situations with regard to life and property. Warning against electric shock. Warning against hot surfaces. Warning against fire hazard. Read the instructions. Packaging of the product is made of recyclable materials pursuant to our national environment legislation. Do not dispose of the packaging wastes with the domestic waste or other wastes, discard them to the dedicated collection points designated by the local authorities. 2 EN 1 Important safety and environmental instructions This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty. 1.1 General safety •Dryer can be used by the children at the age of 8 and over and the persons with physical, sensory or mental disorders or unlearned or inexperienced people as long as they are attended by a person who will be responsible for their safety or who will instruct them accordingly about use of the product. Children should not tamper with the machine. Cleaning and user maintenance works should not be carried out by the children unless they are attended by someone. •Children of less than 3 years should be kept away unless continously supervised. •Adjustable feet should not be removed. (See Overview) The gap between the dryer and the surface should not be reduced by the materials such as carpet, wood and tape. This will cause problems with the dryer. •Always have the installation and repairing procedures carried out by the Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons. •Never wash the dryer by spraying or pouring water onto it! There is the risk of electric shock! 1.1.1 Electrical safety Electrical safety instructions should be followed while electrical connection is made during the installation. A •Connect the dryer to a grounded outlet protected by a fuse at the value specified on the type label. (See Overview) Have the grounding installation performed by a qualified electrician. Our company shall not be liable for any damages that will arise when the dryer is used without grounding in accordance with the local regulations. Dryer / User Manual 3 / 28 EN Important safety and environmental instructions •The voltage and allowed fuse protection is stated on the type label plate. (See Overview) •The voltage specified on the type label must be equal to your mains voltage. (See Overview) •Unplug the dryer when it is not in use. •Unplug the dryer from the mains during installation, maintenance, cleaning and repair works. •Do not touch the plug with wet hands! Never unplug by pulling on the cable, always pull out by grabbing the plug. •Do not use extension cords, multi-plugs or adaptors to connect the dryer to power supply in order to decrease the risk of fire and electric shock. •Power cable plug must be within easy reach after installation. B B 4 / 28 EN Damaged mains cable should be changed notifying the Authorized Service. If the dryer is faulty, it must not be operated unless it is repaired by an authorized service agent! There is the risk of electric shock! Dryer / User Manual Important safety and environmental instructions 1.1.2 Product safety Points to be taken into consideration for fire hazard: Below specified laundry or items must not be dried in the dryer considering fire hazard. •Unwashed laundry items •Items soiled with oil, acetone, alcohol, fuel oil, kerosene, stain removers, turpentine, paraffin or paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer. For this reason especially the items containing the above specifiedstains must be washed very well, to do thisuse adequate detergent and choose a high washing temperature. Below specified laundry or items must not be dried in the dryer due to the fire hazard: •Garments or pillows bolstered with rubber foam (latex foam), shower bonnets, water resistant textiles, materials with rubber reinforcement and rubber foam pads. •Clothing cleaned with industrial chemicals. Items such as lighter, match, coins, metal parts, needle etc. may damage the drum set or may lead to functional problems. Therefore check all the laundry that you will load into your dryer. Never stop your dryer before the programme completes. If you must do this, remove all laundry quickly and lay them out to dissipate the heat. Clothes that are washed inadequately may ignite on their own and even may ignite after drying ends. Dryer / User Manual 5 / 28 EN Important safety and environmental instructions Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire. Piling, stacking or storing oil-affected items can prevent heat from escaping and so create a fire hazard. If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed in hot water with extra detergent - this will reduce, but not eliminate, the hazard. •You must provide enough ventilation in order to prevent gases exiting from devices operating with other types of fuels including the naked flame from accumulating in the room due to the back fire effect. that contains metal reinforcements should not be A Underwear dried in the dryer. Dryer may be damaged if metal reinforcements come loose and break off during drying. C C Use softeners and similar products in accordance with the instructions of their manufacturers. Always clean the lint filter before or after each loading. Never operate the dryer without the lint filter installed. •Never attempt to repair the dryer by yourself. Do not perform any repair or replacement procedures on the product even if you know or have the ability to perform the required procedure unless it is clearly suggested in the operating instructions or the published service manual. Otherwise, you will be putting your life and others' lives in danger. •There must not be a lockable, sliding or hinged door that may block the opening of the loading door in the place where your dryer is to be installed. •Install your dryer at places suitable for home use. (Bathroom, closed balcony, garage etc.) 6 / 28 EN Dryer / User Manual Important safety and environmental instructions •Make sure that pets do not enter the dryer. Check the inside of the dryer before operating it. •Do not lean on the loading door of your dryer when it is open, otherwise it may fall over. •The lint must not be allowed to accumulate around the tumble dryer. •The final step of the drying cycle (cool-down cycle) occurs without applying heat to ensure that the items are left at a temperature that will not damage them. 1.2 Mounting over a washing machine •A fixing device should be used between the two machines when installing the dryer above a washing machine. The fitting device must be installed by the authorized service agent. •Total weight of the washing machine and the dryer -with full load- when they are placed on top of each other reaches to approx. 180 kilograms. Place the products on a solid floor that has sufficient load carrying capacity! Washing machine cannot be placed on the dryer. Pay attention to the above warnings during the installation on your washing machine. A Installation Table for Washing Machine and Dryer Dryer Depth Washing Machine Depth 62cm 60 cm 54 cm 50 cm 49 cm 45 cm 40 cm 54 cm Can be installed Can be Can be Can be Can be Can be Cannot be installed installed installed installed installed installed 60 cm Can be installed Can be Can be Can be Can be Cannot be Cannot be installed installed installed installed installed installed Dryer / User Manual 7 / 28 EN Important safety and environmental instructions 1.3 Intended use •Dryer has been designed for domestic use. It is not designed for commercial purposes and should not be used for other purposes. •Use the dryer only for drying laundry that are marked accordingly. •Manufacturer denies any liability for the damages arising from misuse or faulty handling of the product. •The service life of the dryer that you purchased is 10 years. During this period, original spare parts will be available to operate the dryer properly. 1.4 Children's safety •Packaging materials are dangerous to children. Keep packaging materials away from children. •Electrical products are dangerous for the children. Keep children away from the product when it is operating. Do not let them tamper with the dryer. Use the child-proof lock in order to prevent the children to tamper with the dryer. C Child-proof lock is on the control panel. (See Child-proof lock) •Keep loading door closed even when the dryer is not in use. 8 / 28 EN Dryer / User Manual Important safety and environmental instructions 1.5 Compliance with the WEEE regulation and disposing of the waste product This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers. 1.6 Compliance with RoHS Directive: The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive. 1.7 Package information Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities. Dryer / User Manual 9 / 28 EN Important safety and environmental instructions 1.8 Technical Specifications EN Height (Min. / Max.) Width Depth Capacity (max.) Net weight (plastic front door usage) Net weight (glass front door usage) Voltage Rated power input Model code 2 84,6 cm / 86,6 cm* 59,5 cm 54 cm 7 kg** 36 kg 38,5 kg See type label*** * Min. height: Height with adjustable feet are closed. Max. height: Height with adjustable feet are opened maximum. ** Dry laundry weight before washing. *** Type label is located behind the loading door. C C C 10 / 28 EN Technical specifications of the dryer are subject to specification without notice to improve the quality of the product. Figures in this manual are schematic and may not match the product exactly. Values stated on markers on the dryer or in the other published documentation accompanying with the dryer are obtained in laboratory in accordance with the relevant standards. Depending on operational and environmental conditions of the dryer, these values may vary. Dryer / User Manual 2 Your Dryer 2.1 Overview 11 1 2 10 3 9 8 5 4 7 6 1. Top panel 2. Control panel 3. Loading door 4. Kick plate opening button 5. Ventilation grids 6. Adjustable feet 7. Kick plate 8. Type label 9. Lint filter 10. Water tank drawer 11. Power cord Dryer / User Manual 11 / 28 EN Your Dryer 2.2 Package Contents 1 2 3 4 5 1. Water drain hose * 2. Filter drawer spare sponge* 3. User Manual 4. Drying basket* 5. Drying basket user manual* *It can be supplied with your machine depending on its model. 12 / 28 EN Dryer / User Manual 3 Installation Before the calling the nearest Authorized Service for the installation of the dryer, ensure that electrical installation and water drain is appropriate referring to the user’s manual.(See 3.3 Connecting to the drain and 3.5 Electrical connection) If they are not suitable, contact a qualified electrician and technician to make necessary arrangements. C A Preparation of the dryer's location as well as the electrical and waste water installations is under customer's responsibility. 3.2 Removing the transportation safety assembly A Remove the transportation safety assembly before using the dryer for the first time. A Check that no part of the transportation safety assembly remains inside the drum. Open the loading door. There is a nylon bag inside the drum that contains a piece of styrofoam. Hold it from its section marked with XX XX. Pull the nylon towards yourself and remove the transportation safety assembly. Prior to installation, visually check if the dryer has any defects on it. If the drier is damaged, do not have it installed. Damaged products cause risks for your safety. 3.1 Appropriate installation location Install the dryer on a stable and level surface. Dryer is heavy. Do not move it by yourself. • Operate your dryer in a well ventilated, dust-free environment. • The gap between the dryer and the surface should not be reduced by the materials such as carpet, wood and tape. • Do not cover the ventilation grills of the dryer. • There must not be a lockable, sliding or hinged door that may block the opening of the loading door in the place where your dryer is to be installed. • Once the dryer is installed, it should stay at the same place where its connections have been made. When installing the dryer, make sure that its rear wall does not touch anywhere (tap, socket, etc.). • Place the dryer at least 1 cm away from the edges of other furniture. • Your dryer can be operated at temperatures between +5°C and +35°C. If the operating conditions fall outside of this range, operation of the dryer will be adversely affected and it can get damaged. • The rear surface of the tumble dryer shall be placed against a wall. B 3.3 Connecting to the drain In products equipped with condenser unit, water accumulates in the water tank during the drying cycle. You should drain accumulated water after each drying cycle. You can directly drain accumulated water through the water drain hose supplied with the product instead of periodically draining the water collected in the water tank. Connecting the water drain hose 1-2 Pull hose at the behind of the dryer by hand in order to disconnect it from where it is connected. Do not use any tools to remove the hose. 3 Connect one end of the drain hose supplied with the dryer to the connection point from where you removed the hose of the product in previous step. 4 Connect the other end of the drain hose directly to the wastewater drain or to the washbasin. Do not place the dryer on the power cable. Dryer / User Manual 13 / 28 EN Installation 1 2 3.5 Electrical connection For specific instructions for electrical connection required during installation (see 1.1.1 Electrical Safety) 3.6 Transportation of the dryer 3 4 Unplug the dryer before transporting it. Drain all water that has remained in the dryer. If direct water drain connection is made, then remove the hose connections. We recommend carrying the dryer in upright position. If it is not possible to carry the machine in the upright position, we recommend carrying it by tilting towards the right side when looked from the front. A A C C Hose connection should be made in a safe manner. Your drain house will be flooded if the hose comes out of its housing during water discharge. Water drain hose should be attached to a height of maximum 80 cm. Make sure that the water drain hose is not stepped on and it is not folded between the drain and the machine. 3.7 Changing the illumination lamp In case an illumination lamp is used in your laundry dryer To change the Bulb/LED used for illumination of your tumble dryer, call your Authorized Service. The lamp(s) used in this appliance is not suitable for household room illumination. The intended purpose of this lamp is to assist the user to place laundry in the tumble dryer in a comfortable way. 3.4 Adjusting the feet In order to ensure that the dryer operates more silently and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet. Turn the feet to left or right until the dryer stands level and firmly. C 14 / 28 EN Never unscrew the adjustable feet from their housings. Dryer / User Manual 4 Preparation 4.1 Laundry suitable for drying in the dryer Always obey the instructions given on the garment tags. Dry only the laundry having a label stating that they are suitable for drying in a dryer and make sure that you select the appropriate programme. LAUNDRY DRYING SYMBOLS Do not dryclean Dry-cleanable Do not dry Lay in shadow to dry Lay to dry Hang to dry Do not dry with dryer Hang wet to dry Sensitive / Delicate dry Without heating At low temperature No Iron At medium temperature At high temperature Drying Settings Suitable for dryer At any temperature Drying Symbols Iron at high temperature Iron at medium temperature 200 0C 150 0C Maximum temperature 4.2 Laundry not suitable for drying in the dryer C Delicate embroidered fabrics, woolen, silk garments, delicate and valuable fabrics, airtight items and tulle curtains are not suitable for machine drying. 4.3 Preparing laundry for drying • • • Laundry may be tangled with each other after washing. Separate the laundry items before placing them into the dryer. Dry garments having metal accessories such as zippers, inside out. Fasten the zippers, hooks and buckles and button sheets. Dryer / User Manual Iron at low temperature 110 0C Iron without steam IRON Dry or Steam Do not iron Iron - 4.4 Things to be done for energy saving Following information will help you use the dryer in an ecological and energy-efficient manner. • Spin your laundry at the highest speed possible when washing them. Thus, the drying time is shortened and energy consumption is reduced. • Sort out the laundry depending on their type and thickness. Dry the same type of laundry together. For example thin kitchen towels and table clothes dries earlier than thick bathroom towels. • Follow the instructions in the user manual for programme selection. • Do not open the loading door of the machine during drying unless necessary. If you must certainly open the loading door, do not to keep it open for a long time. • Do not add wet laundry while the dryer is in operation • Clean the lint filter before or after each drying cycle. (See 6.1 in Maintenance and cleaning) • Clean the condenser regularly at least once every month or after every 30 drying cycles. (See 6.4 in Maintenance and cleaning) 15 / 28 EN Preparation • Ventilate the room, where the dryer is located, well during drying. 4.5 Correct load capacity Follow the instructions in the “Programme selection and consumption table”. Do not load more than the capacity values stated in the table. C It is not recommended to load the dryer with laundry exceeding the level indicated in the figure. Drying performance will degrade when the machine is overloaded. Furthermore, dryer and the laundry can get damaged. Following weights are given as examples. Cotton quit covers (double) Cotton quit covers (single) Bed sheets (double) Bed sheets (single) Large tablecloths Approximate weights (g)* 1500 1000 500 350 700 Small tablecloths Tea napkins Bath towels Hand towels Blouses Cotton shirts Shirts Cotton dresses Dresses Jeans Handkerchiefs (10 pieces) T-Shirts 250 100 700 350 150 300 250 500 350 700 100 125 Laundry *Dry laundry weight before washing. 16 / 28 EN Dryer / User Manual 5 Operating the product 5.1 Control panel 1. Program selection knob 1 2 6 2. 3. 4. 5. 6. 3 5 4 Remaining duration indicator On/Off button Start/pause button End duration button Sound warning button 5.2 Screen symbols 5.3 Preparing the machine Tank Child-proof lock full Dryer / User Manual Volume up Filter cleaning Mute Anti Creasing 17 / 28 EN Operating the product 1. 2. 3. 4. Plug in the machine Place laundry inside the machine. Press the On/Off button. When your machine turns on for the first time, it turns on with the declaration (cotton cabinet dryness) program. C Pressing the On/Off button doesn‘t mean the program starts. Press the Start / Pause button to start the program. 5.4 Program selection 1. Determine the appropriate program from the chart below containing the drying levels. 2. Select the program you desire using the Program Selection knob. Only cotton laundry is dried in normal temperature. Thick and multi-layered laundry (towels, sheets, jeans etc.) are dried so that they can be placed into wardrobe without ironing. Xtra Dry Cupboard dry Normal laundry (tablecloths, underwear etc.) are dried so that they can be placed into wardrobe without ironing. Cupboard dry + Normal laundry (Ex: tablecloths, underwear) are again dried so that they can be placed into the wardrobe but more so than the wardrobe dryness option. Iron Dry Normal laundry (shirts, dresses etc) are dried ready for ironing. C For detailed program information see. „Program selection and consumption table“.. 5.5 Main programs The main programs are given below based on fabric type. Cotton Synthetic Dry durable laundry with this program. It dries in normal temperature. Recommended for use with your cotton laundry (sheets, bed covers, towels, bathrobes etc.) Dry laundry that is not very durable with this program. Recommended for use with your synthetic laundry. 5.6 Extra programs The following extra programs are available in the machine for special conditions. C C Extra programs may vary according to the specifications of your machine. In order to receive better results from drying machine programs, your laundry should be washed with the appropriate program in your washing machine and wringed with recommended wringing revolution.. Jeans Express 35’ Mix Sport Shirts Baby Protect Use to dry jeans that are wringed with high rpm in washing machine. You can use this programme to dry your cotton laundry that you have spun at high speeds in your washing machine.This program dries 1,5 kg cotton laundry (1 Shirts / 3 T-shirts) in 35 minutes. Used to dry synthetic and cotton laundry that do not release colour. Used for laundry that is suitable for drying. Used to dry the laundry that are made of synthetic, cotton or mixed fabrics and have a tag indicating that they are suitable for drying. Dries shirts more delicately and thus causes less wrinkles for easy ironing. Program used for baby clothing with can be dried approval on the label. 18 / 28 EN Dryer / User Manual Operating the product C Very little dampness might remain on the shirts after the program. It is recommended that you do not leave the shirts in the drying machine. Delicates You can dry your delicates suitable for drying or laundry that is recommended to hand wash (silk blouses, thin underwear etc.) in low temperature. C It is recommended to dry your delicates in laundry bag to prevent wrinkles and damage. When the program ends, take your laundry out of the machine immediately and hang them to prevent wrinkles. Freshen Up Timed programs It only performs ventilation for 10 minutes without blowing hot air. You can ventilate the cotton and linen clothing that has remained closed for a long duration and remove their odor. You can select the 10 mins and 20 mins time programs to achieve the desired final drying level with low temperature. C On this program, the machine dries as long as the set duration, regardless of the drying level. Dryer / User Manual 19 / 28 EN Operating the product 5.7 Program selection and consumption table EN Programs 2 Capacity (kg) Spin speed in washing Approximate amount Drying time (minutes) machine (rpm) of remaining humidity Cottons / Coloreds A Extra dry 7 1000 % 60 160 A Cupboard dry 7 1000 % 60 129 A Iron dry 7 1000 % 60 110 Shirts 1,5 1000 % 50 40 Jeans 4 1200 %50 95 Sport 4 1000 %60 100 Delicates 1,75 600 %40 45 BabyProtect 3 1000 % 60 85 Express 35 1,5 1200 %50 35 4 1000 %60 85 Mix Synthetics B Cupboard dry 3.5 800 % 40 55 B Iron dry 3.5 800 % 40 43 Energy consumption values Programs Cottons-Cupboard Dry Plus* Capacity (kg) Energy consumption value kWh per year Energy rating star 7 308 2 * : Energy Label standard program (AS/NZS 2442) “All the filters must be cleaned prior to test series.” All values given in the table have been fixed according to standard laboratory conditions. These values may deviate from the table according to the laundry type, laundry spin speed, environmental conditions and voltage fluctuations. 20 / 28 EN Dryer / User Manual Operating the product 5.8 Auxiliary functions Sound warning cancel Drying machine makes sound warnings when the program is completed. If you don’t want sound notifications, press the “Sound Notification” button. When you press the sound notification button it lights up, and program does not make sound notifications when completed. C You can select this function before or after the program starts. 5.9 Warning symbols C Warning symbols may vary according to the specifications of your machine. Fiber filter cleaning When the program is completed, a warning led lights up, which indicates that the filter has to be cleaned. C If the filter cleaning led blinks, see the „Troubleshooting“ chapter. Water tank When the program is completed, a warning led lights up, which indicates that the water tank must be emptied. If the water tank fills up while the program is running, warning led starts blinking and the machine goes into stand-by. In that case empty the water in the water tank and start the program by pressing the Start / Pause button. Warning led turns off and the program resumes. 5.10 End duration You can delay the end duration of the program for up to 24 hours with the end duration function. 1. Open the loading door and place your laundry. 2. Select the drying program. 3. Press the end duration selection button and set the delay duration you want. End duration led lights up. (End duration moves continuously when you keep pressing the button). 4. Press the Start / Pause button. End duration countdown begins. The “:” sign in the middle of the displayed delay duration blinks. C You can add or remove laundry for the duration of the end duration. The duration displayed on the screen is the sum of the normal drying duration and the end duration. At the end of the countdown the end duration led turns off, drying beings and drying led lights up. Changing the end duration If you want to change the duration during the countdown: 1. Cancel the program by pressing the On/Off button. Turn on the drying machine again by pressing the On/Off button. When your drying machine turns on for the first time, it turns on with the declaration (cotton wardrobe dryness) program. 2. Select the program you desire using the Program Selection knob. 3. Repeat the end duration operation for the duration you want. 4. Start the program by pressing the Start / Pause button. Canceling the end duration function If you want to cancel the end duration setting countdown and start the program right away: 1. Cancel the program by pressing the On/Off button. Turn on the drying machine again by pressing the On/Off button. When your drying machine turns on for the first time, it turns on with the declaration (cotton wardrobe dryness) program. 2. Select the program you desire using the Program Selection knob. 3. Start the program by pressing the Start / Pause button. 5.11 Starting the program Loading door open Start/Pause led blinks when the loading door of the drying machine is open. Dryer / User Manual Start the program by pressing the Start / Pause button. Start/Pause led and the Drying led light up, indicating the program started. The “:” sign in the middle of the remaining duration starts to blink. 21 / 28 EN Operating the product 5.12 Child Lock C When the Child Lock is active, all buttons except for the On/Off button are deactivated. To activate the child lock, press the Sound Notification button and End Duration button simultaneously for 3 seconds. C The machine features a child lock which prevents the machine program flow from being affected when buttons are pressed during operation. Te child lock should be deactivated to be able to start a new program after the current program ends or to be able to interfere with the current program. Keep the same buttons pressed for 3 seconds again to deactivate the child lock. C C The lock led on the screen lights up when the Child Lock is activated. Child Lock deactivates when the machine is turned off and on again using the On/ Off button. A warning sound is heard when any button is pressed (except for On/Off button) or the Program Selection knob is turned while the child lock is active. 5.13 Changing the program after it is started After the machine starts running, you can change the program you selected to dry your laundry with a different program. 1. For example, to select Extra Dry program instead of the Iron Dryness, stop the program by pressing the Start / Pause button. 2. Turn the Program Selection knob to select the Extra Dry program. 3. Start the program by pressing the Start / Pause button. Adding and removing laundry in stand-by mode If you want to add or remove laundry after the drying program starts: 1. Press the Start/Pause button to take the machine into Stand-by mode. Drying operation stops. 2. Open the loading door, add or remove laundry and close the loading door. 3. Start the program by pressing the Start / Pause button. 22 / 28 EN C The laundry adding made after the drying operation started may cause the dried laundry inside the machine to mix with the wet laundry and the laundry to remain damp after the operation ends.. Laundry adding and removing can be repeated as much as desired during drying operation. But this process would continuously interrupt the drying operation, and so would cause the program duration to lengthen and increase energy consumption. Thus, it is recommended to add laundry before the program starts. If a new program is selected by changing the position of the program selection knob while your machine is in stand-by mode, the running program ends. Do not contact the inner surface of the drum when adding or removing laundry during a continuing program. The drum surface is hot. 5.14 Canceling the program If you want to cancel the program and end the drying operation for any reason after the machine starts running, press the On/Off button. A As it will be extremely hot inside the machine when you cancel the program while the machine is in operation; run the ventilation program to cool it down. 5.15 Program end When the program ends, the Final/Wrinkle Prevention, Fiber Filter Cleaning and Water Tank Warning leds on the program follow up indicator light up. Loading door can be opened and machine becomes ready for a second run. Press the On/Off button to turn off the machine. C C C In case the laundry is not removed after the program is completed, the wrinkle prevention program that lasts 2 hours start in order to prevent wrinkling of the laundry that remains inside the machine. Clean the fiber filter after each drying. (See. „Fiber filter and loading door inner surface“) Empty the water tank after each drying. (See. „Emptying the water tank“) Dryer / User Manual 6 Maintenance and cleaning Service life of product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals. 6.1 Cleaning Lint Filter / Loading Door Inner Surface Lint and fiber released from the laundry to the air during the drying cycle are collected in the Lint Filter. C A C Such fiber and lint are generally formed during wearing and washing. • Clean the entire inner surface of the loading door and loading door gasket with a soft damp cloth. Always clean the lint filter and the inner surfaces of the loading door after each drying process. You can clean the lint filter housing with a vacuum cleaner. To clean the lint filter: • Open the loading door. • Remove the lint filter by pulling it up and open the lint filter. • Clean lint, fiber, and cotton raveling by hand or with a soft piece of cloth. • Close the lint filter and place it back into its housing. 6.2 Cleaning the sensor • A layer can build up on the filter pores that can cause clogging of the filter after using the dryer for a while. Wash the lint filter with warm water to remove the layer that builds up on the lint filter surface. Dry the lint filter completely before reinstalling it. Dryer / User Manual There are dampness sensors in the dryer that detect whether the laundry is dry or not. To clean the sensors: • Open the loading doorof the dryer. • Allow the machine to cool down if it is still hot due to the drying process. • Wipe the metal surfaces of the sensor with a soft cloth, dampened with vinegar and dry them. C Clean metal surfaces of the sensors 4 times a year. 23 / 28 EN Maintenance and cleaning C A Do not use metal tools when cleaning metal surfaces of the sensors. Never use solvents, cleaning agents or similar substances for cleaning due to the risk of fire and explosion! • Drain the water in the tank. • If there is lint accumulation in the funnel of the water tank, clean it under running water. Place the water tank into its seat. 6.3 Draining the water tank Dampness of the laundry is removed and condensed during drying process and the water that arise accumulates in the water tank. Drain the water tank after each drying cycle. A A Condensed water is not drinkable! Never remove the water tank when the program is running! • C If the direct water draining is used as an option, there is no need to empty the water tank. If you forget to drain the water tank, the machine will stop during the subsequent drying cycles when the water tank is full and the Water Tank warning symbol will flash. If this is the case, drain the water tank and press Start / Pause button to resume the drying cycle. To drain the water tank: Pull the drawer and remove the water tank carefully. 24 / 28 EN Dryer / User Manual Maintenance and cleaning 6.4 Cleaning the condenser; Hot and humid air in the condenser is cooled with the cold air from the room. Thus, the humid air circulating in your dryer is condensed and then pumped into the tank. C 4. Clean the condenser by applying pressurized water with a shower armature and wait until the water drains. Clean the condenser after every 30 drying cycles or once a month. To clean the condenser: 1. If a drying process has been carried out, open the door of the machine and wait until it cools down. 5. Place the condenser in its housing. Fasten the 2 locks and make sure that they are seated securely. 2. Unlock the 2 condenser locks after opening the kick plate. 6. Close the kick plate cover. 3. Pull out the condenser. Dryer / User Manual 25 / 28 EN 7 Troubleshooting Drying process lasts for a long time. • Pores of the fibre filter might be clogged. >>> Wash the filter with warm water. • Condenser might be clogged. >>> Wash the condenser. • Ventilation grills at the front of machine might be blocked. >>> Remove any items in front of the ventilation grills that block ventilation. • Ventilation might be inadequate if the installation area is very small. >>> Open the windows and doors in order to prevent excessive increase in room temperature. • There might be furring on the damp sensor. >>> Clean the damp sensor. • Laundry might be overloaded. >>> Do not overload the tumble drier. • Laundry might not have been adequately spun. >>> Increase the rpm of tumble drier. Laundry is still wet at the end of drying. C Hot laundry unloaded at the end of drying feel wetter than they really are. • You may not have used a program suitable for laundry type.>>> Check the maintenance labels on the laundry and select a program suitable for their type, or use the time programs additionally. • Pores of the fibre filter might be clogged. >>> Wash the filter with warm water. • Condenser might be clogged. >>> Wash the condenser. • Laundry might be overloaded. >>> Do not overload the tumble drier. • Laundry might not have been adequately spun. >>> Increase the rpm of tumble drier. Tumble drier does not turn on or program cannot be started. Tumble drier does not activate when set. • • • • The power cord might not be plugged in. >>> Make sure the power cord is plugged in. Loading door might be open. >>> Make sure that the loading door is properly closed. You may not have set the program or pressed the Start/Pause button. >>> Make sure that you have set the program and it is not in Pause position. Child lock might be active. >>> Disable the child lock. Program was interrupted for no reason. • Loading door might not be properly closed. >>> Make sure that the loading door is properly closed. • A power cut might have occurred. >>> Press the Start/ Pause button to start the program. • Water tank might be full. >>> Drain the water tank. Laundry is shrunk, felt or worn out. • You may not have used a program suitable for laundry type. >>> Check the maintenance labels on the laundry and select a program suitable for their type. The lighting inside the tumble drier does not turn on. (In models with lamps) • You may not have turned on the tumble drier be using On/Off/Cancel button. >>> Make sure that the tumble drier is at ‘on’ position. • Lamp might be broken. >>> Contact the Authorized Service for the replacement of lamp. Filter cleaning warning led is on. • Fibre filter might not have been cleaned. >>> Clean the filter. Filter cleaning warning led flashes. • • • Filter bearing might be clogged with fibre. >>> Clean the filter bearing. There might be a layer in the filter pores that causes clogging. >>> Wash the filter with warm water. Condenser might be clogged. >>> Wash the condenser. 26 / 28 EN Dryer / User Manual Water is leaking from the condenser cover. • There might be fibre build-up inside the loading door and on the surfaces of loading door gasket. >>> Clean the inner surfaces of loading door and surfaces of loading door gasket. Loading door opens itself. • Loading door might not be properly closed. >>> Push the loading door until you hear the closing sound. Water tank warning led is on/flashes. • Water tank might be full. >>> Drain the water tank. • Water drain hose might be folded. >>> Check the water drain hose if the product is directly connected to the water outlet. A If you cannot eliminate the problem despite following these instructions, please contact the vendor that .sold you the product or an Authorized Service. Do not try to repair the product yourself Dryer / User Manual