Transcript
ingenium www.ingeniumsl.com fire and gas sensors · B-DTV · B-DTV BUSing® fire/smoke sensors Adapter Installation Allows adapting conventional analog sensors (loop type). Cable 4x0.5mm • Integrated circuit +12 A B Ref. + - Consumes • 2 wires connection · B-DTV +12V A B Ref. • Mounting on the rear of the sensor ingenium www.ingeniumsl.com • Size: Ø 30x15mm Description This device allows the connection of a conventional fire or gas loop type (2 wires) sensor to the BUSing® system. Ð Connection to sensor 2 wires loop type Mx. distance: 30m With this solution, the sensor becomes into another home automation device, connectable to BUS and completely programmable and configurable from the Development System (SIDE). Configuration using Development System (SIDE) • 2 programmable scenes for activation and deactivation of the sensor. • Up to 60 programmable BUS events for each scene. + Technical Characteristics Device Reference Voltage Supply Current Consumption Number of connectable sensors Max. Recommended Distance B-DTV 9–16V DC (BUS) 25mA (BUS) 3 30m* Connection example to DH/DTV Fire or gas sensor * maximum recommended distance between sensor and adapter Cable 4x0.5mm Consumes +12V A B Ref. á DH/DTV 4 3 2 Connection of additional DH/DTV sensors Up to 3 sensors can be connected directly to a B-DTV. Ð Ð + 3 3 1 2 + 3 4 Ð + 4 2 1 4 2 1 1