Download Screwless Wall Socket Operating Instructions 03

Operating Instructions
03/2009
Screwless Wall Socket
1
2
Remove 90 mm of the outer cable sheath and feed it through the
grommet into the enclosure. Then strip 8-10 mm of insulation from
the wires.
While pressing the release lever, bend one wire and insert into its
terminal. Repeat this process until all wires have been placed in
their designated terminal.
3
Solid conductors, cross section 1,5 to 4 mm2.
Strip wire and you’re done.
Flexible conductor, cross section 1,5 to 2,5 mm2,
with wire end ferrule, crimped in a gastight manner.
Flexible conductor, cross section 1,5 to 4 mm2,
ultrasonically welded.
Simply press the release lever to remove wire from its terminal.
Walther-Werke · Ferdinand Walther GmbH
P.O. Box 11 80 · 67298 Eisenberg/Pfalz
Phone + (49) 63 51 / 475-0
Fax + (49) 63 51 / 475-227
Internet: www.walther-werke.de
E-mail: [email protected]
Latest version (update):
www.walther-werke.de
Use ruler to determine length of cable sheat / wire insulation to be removed (90 mm / 10 mm):
90
80
70
60
50
40
30
20
10
(For a true to scale printout choose „no page adjustment” in the print menu).
0