Transcript
ListNPFlowStatus user manual after NABS release 13.3 ListNPFlowStatus functionality after implementation of Incident 20101 with NABS Release 13.3. To get the proper pagination for list the np_flow status for a particular period (ListNPFlowStatus), the user must ensure the following input standard: 1. 2. 3. 4. 5. User can give page-size either 250 or 500. No other buffer size (pagesize) is supported User can provide any no as page no. If there are equal or less data on that page with that many pagesize capacity, data will be displayed. Else, total count value will be coming as 0 If i.e. 25 data exist for a particular date period, and user is giving page no as 0 and page size as 250/500, 25 rows will be showed. If for the same set of data user gives page no as 1, total count will be 0 If there are 255 data present for a particular date period and user gives page no as 1 and buffer size as 250/500, 5 data will be shown There is no possibility to see total no of data available. TDC Wholesale Teglholmsgade 3 0900 København N Danmark Side 1