Transcript
User Guide Waterless Wash & Wax M0005RZD Application Single-step Wash & Shine for Waterless Cleaning of Vehicle Paint & Body Work Features & Benefits Dilution Equipment Required Use Instructions Gentle but effective removal of road grime Imparts a deep and lasting gloss Quick and easy to use This product is supplied ready to use. Do not dilute. Soft cloth (ideally micro-fibre) 1. Ensure you have an adequate supply of clean, soft cloths. 2. Always complete one panel at a time ensuring it is clean and shiny before moving on to the next panel. 3. Taking one panel at a time spray on a generous film of Waterless Wash & Wax and allow a couple of seconds for it to loosen soiling. 4. Then using a clean soft cloth gently wipe away the loose soiling. Turning the cloth frequently to ensure the surface is not abraded by the grit adhering to the cloth. 5. Once the surface is clean, buff the clean panel to a dry shine using a clean dry cloth. Hints & Tips For best results use micro-fiber cloths. In order to keep the cloth free from heavy grit loading it is helpful to rinse the cloth periodically in fresh water and then wring it dry. Precautions Always observe precautions in material safety data sheet. Do not allow the product to dry onto the surface. On hot days work on smaller areas of paintwork to reduce the risk of drying. Issue No. 1 Rozone Ltd, Queen Street, Darlaston, Wednesbury, West Midlands WS10 8JF Part of the Rozone Group of Companies Issue Date: 29.11.2012 Page 1 of 1 E-mail : [email protected] Tel: 0121 526 8181. Fax: 0121 526 8182
