Transcript
Clip Wallplate Top Cap Down After Glazing Panels Have Been Placed In Roof Wall Plate Cut Panel Support Trim To Fit Inbetween Each Glazing Bar M6x35mm M6x20mm Front Beam M6x35mm M8x70mm Wall Plate M6x20mm Adjust Legs Along Beam To Suit Clips On Under Front Beam Carport Installation Plan Front Beam Use The two Edge Bars For The Last Glazing Bar On Either Side Of The Roof Fix Legs To Front Beam & Raise Into Position This Dimension Is Height On Layout Plan + Finished Leg Height fromGround Edge Bar M8x16mm This Depth Is On Layout Plan M8x70mm