Download DVB-T2 PVR MPEG4 USER MANUAL

DVB-T2 PVR MPEG4
191/5534
USER MANUAL
IMPORTANT - Please read these instructions fully before installing or operating
These instructions contain important information which will help you get the best from your
television and ensure safe and correct installation and operation.
For any help concerning set up and use of your TV please call the
Customer Helpline: 0845 604 0105
Lines open: 9am - 8pm Monday to Saturday and 10am - 4pm Sunday
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Contents
Safety Precautions.................................................. 3
Power Cord............................................................. 3
Overview of the Remote Control............................. 5
Connections on the Set Top Box............................. 6
Inserting Batteries in the Remote Control............... 7
Connecting the Set Top Box to a TV Set................. 7
Antenna Connection................................................ 8
Important - Hard Disk Information......................... 10
Recording Format.................................................. 10
First Time Installation.............................................11
Changing Channels................................................11
Adjusting the Volume..............................................11
Volume Up / Down..................................................11
Mute...................................................................... 12
On-Screen Information.......................................... 12
Instant Recording.................................................. 12
Time Shifting (Pause Live Recording)................... 12
Viewing the Main Menu......................................... 13
Operating the Channel List.................................... 13
Selecting a Specific Channel................................. 13
Deleting Channels ................................................ 13
Deleting Multiple Channels:................................... 13
Renaming Channels ............................................. 13
Adding Locks to Channels .................................... 14
Locking Multiple Channels:................................... 14
Setting Favourites ................................................ 14
Event Options........................................................ 15
Select Channel...................................................... 15
Record Programme/Delete Timer.......................... 15
Record Series/Delete Series................................. 15
Configuring Timers................................................ 16
Play Options.......................................................... 18
Main Title............................................................... 18
Text........................................................................ 18
Duration................................................................. 18
Recording Title...................................................... 18
Display................................................................... 18
Duration................................................................. 18
Max Time Shift....................................................... 19
Auto Discard.......................................................... 19
Active channels..................................................... 20
Scan Encrypted..................................................... 20
Output Settings...................................................... 20
TV Type................................................................. 20
TV Out................................................................... 20
Receiver Upgrade................................................. 21
Parental Settings................................................... 21
Menu Lock............................................................. 21
Guidance............................................................... 21
Set Pin................................................................... 21
Low Power............................................................. 21
Audio Description.................................................. 21
Available Langs..................................................... 22
Preferred Language (Optional).............................. 22
Relative Volume (Optional)................................... 22
Configuring Language Preferences....................... 22
Preferred............................................................... 22
Current (*).............................................................. 22
Installation & Retune............................................. 22
Automatic Channel Scan / Retune........................ 22
Manual Channel Scan........................................... 23
Format Disk........................................................... 23
First Time Installation............................................ 23
IP Settings............................................................. 23
Viewing The Media Browser.................................. 24
Viewing USB Disk Contents.................................. 24
Media Browser USB Playback.............................. 24
Playing MP3 Files.................................................. 24
Viewing JPG Files................................................. 24
Slideshow Options................................................. 25
Playing Video Files................................................ 25
Displaying ALL Files.............................................. 25
HDD Initialisation................................................... 26
No Signal............................................................... 26
No Channels Have Been Added Yet...................... 26
player..................................................................... 27
GENERAL CHARACTERISTICS.......................... 29
Profiles.................................................................. 29
-1-
Features
Accessories
• 200 channels
Please make sure that the following items are
included with your device.
• Programme recording
• 8-Days EPG.
• TV scart (with RGB and CVBS support).
• Favourite list.
• Parental lock options.
• Manual and automatic search options.
• On-Screen-Display.
Batteries
• Automatic day light saving time updating.
2 X AAA
• Decoding & Video Out: PAL.
• Multi-format audio decoder.
• Multi language audio support (up to 10).
• Audio mute and volume control.
•Record programmes using 8 day EPG
•DVB-T2 Compliant
•UHFIV and UHFV; 470-862 MHz, 8MHz bandwith
•Supports 16-QAM, 64-QAM, 256QAM(DVB-T2)
modulations
1 x Quick Start
Guides
•VIDEO & OSD :
• Video: MPEG2, PAL, 4:3/16:9
•Time shift – pause live TV.
•Freeview+ compatible
Remote Control
Instruction Book
HDMI cable
Introduction
• Thank you for choosing this product. This manual
will guide you through the proper operation of your
set top box.
• Before operating the set top box, please read this
manual thoroughly. Please keep this manual in a safe
place for future reference. Read the corresponding
instructions of this handbook prior to the first use
of the device, even if you are familiar with using
electronic devices.
• Please keep this instruction book for future reference.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
-2-
• Take care to provide good air circulation. Place the
device in a location with adequate ventilation to
prevent heat build-up in the device.
Safety Precautions
Power Source
Power
• Always use the provided AC adaptor.
• Operate only from the power source specified on
the AC adaptor.
• The power adaptor may become hot during normal
operation. This is not a malfunction.
• Please make sure that the adaptor is not covered
while in operation. Leave a space of 15 cm (minimum)
around the AC adaptor.
• The rating information and safety caution of the AC
adaptor are provided on the adaptor.
• Should any solid object or liquid fall into the cabinet,
unplug the device and have it checked by qualified
personnel before operating it any further.
• The device should not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases, shall be placed on the device.
CAUTION
• Batteries shall not be exposed to excessive heat
such as sunshine, fire or the like.
WARNING: When the set is not in use for a long time,
disconnect from the power.
Power Cord
• Do not place the unit, a piece of furniture, etc., on
the power cord, or pinch the cord. Handle the power
cord by the plug. Do not pull out the plug by tugging
the cord and never touch the power cord when your
hands are wet as this could cause a short circuit
or electric shock. Never make a knot in the cord or
tie it with other cords. The power cords should be
routed in such a way that they are not likely to be
stepped on. A damaged power cord can cause fire
or give you an electrical shock. Check the power
cord once in a while. When you find it damaged,
ask closest service agent for help.
• Please do not place the set in a place subject to
direct sun light, excessive dust or mechanical shock
or in a location near heat sources.
• The device should be placed on a solid and safe
base.
• Do not place the apparatus on a soft surface such
as a rug that might block the ventilation holes on
the bottom.
• The selected location should not have a high
humidity. Condensation, that may arise in a kitchen
for example, may cause a malfunction or damage
the device.
• Heating or other thermal radiation under the set also
may cause malfunction or damage the device.
• The hot air, which arises during operation, should
be ventilated with sufficient air circulation. Please
do not put the device into closed areas and do not
cover it.
• Please avoid contact of the device with water or
humidity. Do not put into operation near bath,
swimming pools.
Connection to a Television Distribution System
(Cable TV etc.) from Tuner
Device connected to the protective earthing
of the building installation through the mains
connection or through other apparatus with a
connection to protective earthing-and to a
television distribution system using coaxial cable,
may in some circumstances create a fire hazard.
Connection to a cable distribution system has
therefore to be provided through a device providing
electrical isolation below a certain frequency
range (galvanic isolator, see EN 60728-11)
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
-3-
SOME DOS AND DON’TS ON THE SAFE USE
OF EQUIPMENT
DON’T listen to headphones at high volume, as such
use can permanently damage your
This equipment has been designed and
manufactured to meet international safety
standards but, like any electrical equipment,
care must be taken if you are to obtain the
best results and to ensure its safety.
DON’T leave equipment switched on when it is
unattended unless it is specifically stated
**************
DO read the operating instructions before you attempt
to use the equipment.
DO ensure that all electrical connections (including
the mains plug, extension leads and inter-connections
between the pieces of equipment) are properly
made and in accordance with the manufacturer’s
instructions. Switch off and withdraw the mains plug
before making or changing connections.
DO consult your dealer if you are ever in doubt
about the installation, operation or safety of your
equipment.
DO be careful with glass panels or doors on
equipment.
DO route the mains lead so that it is not likely to be
walked on, crushed, chafed, or subjected to excessive
wear and tear or heat.
**************
DON’T remove any fixed cover as this may expose
dangerous voltages.
DON’T obstruct the ventilation openings of the
equipment with items such as newspapers, tablecloths,
curtains, etc. Overheating will cause damage and
shorten the life of the equipment.
hearing.
that it is designed for unattended operation or has a
stand-by mode. Switch off using the
switch on the equipment and make sure that your
family know how to do this. Special
arrangements may need to be made for infirm or
handicapped people.
DON’T continue to operate the equipment if you are
in any doubt about it working
normally, or if it is damaged in any way - switch off,
withdraw the mains plug and consult
your dealer.
ABOVE ALL
--- NEVER let anyone especially children
push anything into holes, slots or any other
opening in the case - this could result in a
fatal electrical shock;
--- NEVER guess or take chances with
electrical equipment of any kind
--- It is better to be safe than sorry!
DON’T allow electrical equipment to be exposed to
dripping or splashing, or objects filled with liquids, such
as vases, to be placed on the equipment.
DON’T place hot objects or naked flame sources
such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and
lead to fires.
DON’T use makeshift stands and NEVER fix legs
with wood screws - to ensure
complete safety always fit the manufacturer’s
approved stand or legs with the fixings
provided according to the instructions.
DON’T use equipment such as personal stereos or
radios so that you are distracted from
the requirements of traffic safety. It is illegal to watch
television whilst driving.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
-4-
Overview of the Remote Control
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
-5-
Connections on the Set Top Box
FRONT VIEW
BACK VIEW
1. OPTICAL AUDIO OUT: You can use this connector to output the digital audio to an external device.
See your audio system instruction book for further information.
2. ANTENNA IN: Aerial input
3. ANTENNA OUT: To watch channels on the TV
4. HDMI IN: HDMI connection
5. LAN: Ethernet Input
6. SCART OUT: If your TV has a scart connector, you can connect the box to your TV using a scart cable
7. POWER CABLE : DC IN (12V)
Make sure that you connect all cables and connections before you plug the unit into the mains supply. After you
connect the unit to the mains supply, the LED light located on the front panel will be red (Standby mode).
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
-6-
Inserting Batteries in the Remote Control
• Remove the battery cover located on the back of the remote control by gently
pulling backwards from the indicated part.
• Insert two AAA/R3 (2 X 1.5Volt) or equivalent type batteries inside. Place the
batteries in the correct direction observing the polarity symbols (+/-) and replace
the battery cover.
• While using the remote control, you should direct it towards the front panel of the
receiver. Remote range is approximately 7m/23ft.
• If your receiver no longer responds to the remote control. it is probable that the
batteries are exhausted. If so you can still use the local buttons of the receiver. You
can replace batteries after they are exhausted.
Note : Remove the batteries from the remote control when it is not to be used
for a long period. Otherwise it can be damaged due to batteries leaking.
Connecting the Set Top Box to a TV Set
You can connect the set top box to your TV by using the scart socket or HDMI input. Use a scart or HDMI
cable to connect the set top box to your TV.
The set top box gives RGB or CVBS output from scart or high definition quality from HDMI output.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
-7-
Power Connection
MPORTANT: The set-top box is designed to operate on 12 V DC. For this, an adaptor is used which
gives 12 V voltage. Connect this adaptor to a system that supplies 220-240V AC,50Hz.
• After unpacking, allow the set-top box to reach the ambient room temperature before you connect the set
to the mains.
Antenna Connection
This illustration shows how to connect an antenna.
• Use ANTENNA IN to connect to an antenna system.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
-8-
Power On-Off
Connect all cables before plugging into the mains. After plugging in the AC adaptor for the set top
box to the mains supply, a light will be seen on the front panel (Standby mode). When the set top box
is first powered up please wait until the box is initialized before activating the receiver since booting
of software will take some time. Please wait until unit is initialized. This may take almost a minute.
This product conforms with the latest European Union Power Consumption Regulations and features
a low power standby mode. The products enters into the low power standby mode approximately
30 seconds later after the standby button is pressed to turn off the unit. Until low power mode is
activated, a clock will be displayed at the display. When the low power mode is activated, the display
will be shut down. When you press the standby button during low power mode, it may take a minute
until the product is initialised. However, if you press the standby button before the low power mode
is activated, the unit will be initialized in a couple of seconds (Active standby mode).Although it is
not recommended for enviromental reasons, you may disable low power mode in your product at
setup –configuration menu.
Auto Power Down:
This box will automatically switched from active mode into standby mode, after less than three hours
in active mode, following the last user interaction and/or a channel change with an alert message
two minutes before going in to standby mode. The Automatic power-down can be set as disabled, 2
hours, 3hours, 4hours, 6hours or 8hours from the configuration menu.
Important Note : If there is any ongoing programme recording or if any EPG programme recordings
and/or manual recordings are set to a nearby time, the unit does not switch to low power mode and
remains in active standby mode until recording tasks have been finished. At low power mode, the
unit initializes a couple of minutes before the actual time of the incoming recording task.
Important Note : The unit initializes from time to time to receive updates from the EPG broadcast
in order to synchronize EPG recording tasks properly. After getting updates, the unit switches to low
power mode automatically. This takes a short while and it is not a malfunction.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
-9-
Important - Hard Disk Information
This Recorder has a built in hard disk (abbreviated
as HDD ) for recording and playback. Beware of
the following points when setting up and using the
Recorder. Failure to observe precautions may cause
damage to the HDD itself or its content, failure of the
disk to operate, or recording of noise.
• Do not subject the Recorder to any vibration or
impact.
• Do not place the Recorder in a cramped location
which might block the ventilation port on the back of
the Recorder.
• Do not place the Recorder in a location with severe
temperature variation.
• If the Recorder is set up in a location with severe
temperature variation, dew may form on and inside
the Recorder. If the Recorder is used with internal
dew formation present, this may cause HDD damage
or malfunction. We recommend keeping variation in
room temperature within 10˚C per hour.
• Do not place the Recorder in a location with high
humidity.
• Place the Recorder horizontally, never at an
incline.
• Do not place a magnetic device (magnet etc.) close
to the recorder.
• When the power is on, do not unplug the AC adaptor
from the AC outlet, turn off the breaker for the area
where the Recorder is set up, or move the Recorder.
When moving the Recorder, first turn off the power and
then unplug the power cord from the AC outlet.
Recording Format
• HDD recording is done using the variable bit rate
format (VBR) for more efficient recording. The
following phenomena may occur.
With the variable bit rate format, the remaining amount
which can be recorded may increase or decrease
relative to the display of the remaining amount of
HDD space.
When the HDD is out of space, it will operate regarding
one of these options and delete the
recordings.
• Even if you delete a programme, the remaining
amount may not increase by the amount of deleted
time. When recording new video, record with an extra
margin in the amount of remaining space.
Unrecordable Material
In the unlikely event that there is some problem like
loss of recorded video or audio content due to an HDD
malfunction, please be aware beforehand that we will
bear no responsibility to compensate for the content
which could not be recorded or edited, for the loss of
recorded or edited video, or for other related direct or
indirect damages.
- If a power failure occurs
• The content being recorded or timer recorded may
be damaged if power failure occurs.
• The content being played back may be damaged.
- For important recording
NOTE
• If a message indicating an HDD error is displayed
(such as “ERROR IN HDD. CANNOT OPERATE.”)
and the HDD has malfunctioned, you cannot replace
the HDD by yourself. If you disassemble the Recorder,
the warranty will become void. Also, recovery of data
is impossible.
Hard Disk Operation (Recording / Playback / Time
Shift Recording)
If the Recorder is used in a cold location (a location
at low temperature), the drive will only allow live
viewing after power is turned on until the HDD is
ready. During this time, the Recorder will not allow
Time Shift Viewing, recording, display of recording
lists or playback of recorded programmes. Please
wait until the HDD is ready.
• When the display indicates that the remaining
amount of HDD space is low, first delete unnecessary
programmes, and then record with an extra margin
in the amount of remaining space. There is an option
in the configuration menu to discard the recordings.
You can choose between three options:
Deleting,
1 – Oldest recordings
2 – Largest recordings
3 – Shortest recordings
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
- 10 -
First Time Installation
IMPORTANT: Ensure that the aerial is connected
before switching on the set top box for the first
time.
When the set top box is operated for the first time,
installation wizard will guide you through the process.
First, TV Type selection on-screen menu will be
displayed:
• To start installation process, select Yes by using
“ ”/“ ” buttons and then press the OK button.
• The box will start to search available stations. The
progress bar will move along the line. You should
allow the set top box to complete the search to store
all available stations.
Note: You can press MENU button to cancel.
By pressing the “ ”/“ ” buttons select the Tv type you
want to set and press OK button. Afterwards, “Select
HDMI resolution” OSD will appear on the screen.Select
your desired resolution by pressing “ ”/“ ” button and
press OK.
Changing Channels
• You can change channels with the following
methods.
• You can press the numeric buttons (0–9) to directly
enter the channel number. You can press numeric
buttons consecutively to enter two or more digits.
• Press the P +/ P - buttons to move up or down to the
next available channel.
Note: You can press OK button to display the channel
list.
Adjusting the Volume
Volume Up / Down
• You can increase or decrease the volume by using
V+ / V- buttons.
Then “Do you want to start an automatic channel
scan?” pop-up menu is displayed. Auto search can
be started by selecting the “Yes” button. The box will
automatically find the channels and store them.
• The volume level selected will remain set, even when
the receiver is turned off and on again, until you change
volume again.
• The audio volume adjustment for the receiver is
independent of the volume control on your TV set.
IMPORTANT: You should be careful that both volume
controls are kept within reasonable levels so that when
switching on, or when first turning on your TV set, the
sound level is not too high.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
- 11 -
Mute
• You can press
to mute the sound of your set
top box. The sound will be muted once this button
is pressed.
Select Yes by using “ ” or “ ” / OK buttons to cancel
instant recording.
Note: When two recordings are active, you can only
watch recorded channels.
It is allowed to schedule recordings up to four events
by Instant Recording.
• To cancel mute, you can press
use the V +/- buttons.
Time Shifting (Pause Live
Recording)
button again or
On-Screen Information
• You can press the INFO button to display on-screen
information. Details of the station and current
programme will be displayed on the information
screen.
• The information screen will then display the current
event name, next event name, starting and ending
time, duration bar, programme mode and the
channel number and name.
• Pause Live Recording is a feature that enables you
to pause a live broadcast. The live broadcasting can
be stopped any time.
Instant Recording
• Press
(RECORD) button to start recording an
event instantly while watching a programme. The
following OSD appears on the screen:
Holby City
'•Press PAUSE
button to timeshift the broadcasting.
In the INFO banner the timeshift will commence.
• The duration of Timeshift can be adjusted from
Recordings in the Configuration menu.
• In order to stop the timeshift press PLAY, PAUSE or
OK button. The paused recording can be watched
in different speeds by means of
or
keys.
To terminate the timeshifting press STOP button.
29m
• Record OSD will then be displayed for a short time
and the current event will be recorded.
• Press (STOP) button to cancel instant recording.
The following OSD will be displayed:
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
- 12 -
Operating the Channel List
Menu System
• Press “ ”/“ ” button to select the channel that will
be processed.
Viewing the Main Menu
• Press the MENU button to view main menu.
• You can move between menus by using the
navigation ( / /
/ ) buttons on the remote
control.
• You can enter, select or confirm a menu option by
using OK button.
• Press “ ”/“ ” button to select a function on Channel
List menu.
• Use P+/P- buttons to move page up or down.
• Press BLUE button to view filtering options.
• Press YELLOW button to tag/untag a channel.
• In some sub-menus, you can use BACK button to
return to a previous menu screen.
• Press GREEN button to tag/untag all.
• To exit from a menu screen, you can press MENU
button.
• Use INFO button to view more information.
• The following items are located in the main menu
screen:
• Press MENU button to exit.
Selecting a Specific Channel
• Select option should be highlighted by using “ ”/“
” button.
• To watch a specific channel, you should highlight
the desired channel using “ ”/“ ” button and press OK
button. Selected channel will be displayed.
• If the selected channel is password protected, the
parental lock password will be required to watch the
selected channel.
Deleting Channels
• Select the channel that you want to delete and select
Delete option using “ ”/“ ” button . Press OK button
to continue.
• A message will be displayed to confirm your decision.
Select YES to delete the selected channel, select
NO to cancel. Press OK button to continue.
Managing Stations: Channel List
• The set top box keeps all stored stations in the
Channel List.
• Press MENU button to view main menu. Select
Channel List item by using “ ”/“ button. Press
OK to view menu contents.
Note: You can direclty press OK button to view
channel list.
Deleting Multiple Channels:
• Select Delete and highlight the channel you want
to delete.
• Press YELLOW key. The channel will be marked.
Move to the next channel you want to delete. Press
YELLOW key.
• Mark the other channels you want to delete like the
same way and press OK.
You will see a confirmation menu. Select YES in the
menu. The selected channels will be deleted.
To mark all the channels in the channel list at once
you can use GREEN key.
Renaming Channels
• Select the channel that you want to rename and
select Edit Name option using “ ”/“ ” button. Press
OK button to continue.
• Pressing “ ”/“ ” button moves to the previous/next
character. Pressing “ ”/“ ” button toggles the
current character, i.e., ‘b’ character becomes ‘a’ by
pressing “ ” and ‘c’ by pressing “ ”.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
- 13 -
• Pressing the numeric buttons ‘0...9’ replaces the
highlighted character with the characters printed
above the button one by one as the button is
pressed.
• Select a list by pressing “ ”/“ ” buttons. Afterwards
select a channel by using ”/“ ” button. Press OK
button to add selected channel to the favourites list.
• Press MENU to cancel editing.
• Star icon indicates that the selected channel is added
to the favourites list.
• When finished, press OK button to save the new
name.
• You can press OK button again to remove the
selected channel from the list.
Adding Locks to Channels
Button Functions:
• Select the channel that you want to lock and select
Lock option using “ ”/“ ” button. Press OK button
to continue.
• OK: Adds/removes a station.
• You will be asked to enter parental control PIN code.
Default PIN is set as 0000. Enter the PIN number.
• GREEN: Tags/untags all.
• Press OK button when the desired channel is
highlighted to lock/unlock the channel. Lock symbol
will be displayed next to the selected channel. You
can repeat the same operation to cancel the lock.
Note: Default PIN code is 0000 and it can be changed
using the Configuration Menu.
Locking Multiple Channels:
• Select Lock item and highlight the channel you want
to lock. Press YELLOW key. The channel will be
marked.
• Move to the next channel you want to lock and press
YELLOW key.
• Mark the other channels you want to lock like the
same way and press OK.
• Enter the pin code in the menu displayed and press
OK.
• The selected channels will be locked.
• To mark all the channels in the channel list at once
you can use GREEN key.
• BLUE: Displays filtering options.
• YELLOW: Tags/untags a channel.
Viewing Electronic Programme
Guide (EPG)
You can view the electronic programme guide (EPG)
to view information about available programmes. The
box gets channel & programme information weekly
by means of 8 day EPG. Select Programme Guide
from the main menu by using “ ”/“ ” buttons. Press
OK to continue.
HINT: You can also press the GUIDE button to view
the EPG menu.
• Press “ ”/“ ” buttons to navigate through channels.
• Press “ ”/“ ” buttons to navigate through the
programme list.
• EPG menu displays available information on all
channels.
• Please note that event information is updated
automatically. If there are no event information
data available for channels, EPG will be displayed
with blanks.
Setting Favourites
• Select Favourites by using “ ”/“ ” button and press
OK button.
• You can set various channels as favourites so that
only the favourite channels are navigated.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
- 14 -
Red button (Prev Day): Displays the programmes
of previous day.
Green button (Next day): Displays the programmes
of the next day.
Yellow button (Zoom): Expands programme information.
Blue button (Filter): Views filtering options.
INFO (Details): Displays the programmes in detail.
: Records the selected programme.
Numeric buttons (Jump): Jumps to the preferred
channel directly via numeric buttons.
OK (Options): Displays programme options including
“Select Channel” option.
: Scrolls page left.
Record Series/Delete Series
In the EPG menu, after you have selected a
programme, press the OK button and select the
Record Series option in the menu which appears and
press the OK button again. The selected programme
will then be set up for series recording. With this
feature, you can record a programme and all of
its following parts within 8 days. The information
belonging to the selected programme will be saved
from the software and following parts of the selected
programme which are not included in the period of
8 days, will be automatically added day by day. The
letter “s” denotes that these recordings are series
records.
To cancel an already set series recording, highlight
that programme and press the OK button and select
the option Delete Series. The recordings will be
cancelled.
: Scrolls page right.
Text (Search): Displays “Guide Search” menu.
(Now) : Shows the current programme.
Note: Series programme information should be
broadcasted by the broadcaster.
Event Options
In EPG menu, press the OK button to enter the “Event
Options” menu.
Check Conflicts
A conflict is caused, if more than two programmes are
set for recording in the same time interval. In the EPG
menu, press the OK button. In the following window,
select the option “Check Overlapping Timers” and
press again the OK button. You will enter the “Too
Many Timers” window.
Select Channel
• Using this option, you can switch to the selected
programme.
Record Programme/Delete Timer
After you have selected a programme in EPG menu,
press the OK button and Event Options screen will
be displayed. Select “Record Programme” option
and press the OK button. The selected programme
is then set to record.
To cancel an already set recording, highlight that
programme and press the OK button and select
the option “Delete Timer”. The recording will be
cancelled.
Note: When two recordings are active, you can only
watch recorded channels.
Split Record
If you select a programme to be recorded, with this
feature, if there is another part of the programme
available, it will also be set to automatically record.
For example in the following picture you see the
programme with a red underline, the following episode
is also underlined. To do this, you have to press only
the RECORD button once. The rest will be done
automatically.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
- 15 -
Note: Split programme information should be
broadcasted by the broadcaster.
Multiple/Alternative Timer Record
It is possible to record or set recording timers for two
individual events at the same time interval. If you set
more than two recordings at the same time, you will
see an error message.
NOTE: A conflict is caused, if more than two
programmes are set for recording in the same time
interval. To solve this conflict, you have to select an
alternative for one of those programmes or cancel
one of the recording timers.
NOTE: If there is still a conflict and you leave this
menu by pressing the OK button, you will see this
warning message: “There are still conflicts!”. A warning
triangle will appear nearby the programmes which
cause a conflict.
Configuring Timers
Select Timers from the main menu and press OK
button.
INFO: Pressing this button, gives you detailed
information about the selected programme.
Record/Cancel: Sets recordings for the selected
programme. If you pres it again, the recording will
be cancelled.
OK: Pressing this button will save the latest changes
and you will leave this window and go back to the
EPG window.
To add a timer, press the YELLOW button on the
remote control. Then “Add Timer” window appears.
Alternatives: If you press this button, you will get
alternatives for the programme which causes a
conflict.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
- 16 -
Recordings Library
To view the list of recordings, press the MENU button to
display the main menu and use the “” or “” button to
highlight the “Recordings Library” line and press the
OK button. Recordings Library will then be displayed
with available recordings.
Channel: “ ”/“ ” keys will navigate the user through
the TV or Radio list.
Record Type: Displays recording type.
Date: Starting date is entered via the Left/Right or the
numeric buttons.
Start: Starting time is entered via the Left/Right or
the numeric buttons.
End: Ending time is entered via the Left/Right or the
numeric buttons.
Duration: Duration between Start and End time.
All the recordings are kept in a list in the recordings
library.
Red bar: Indicates the used space of the recordings
on the hard disk.
Repeat: Sets the repeating preference.
Playback: Sets playback control.
Change/Delete: permits or prohibits any modifications
for other users.
You can save the adjustments by pressing the GREEN
key or cancel the process by pressing the RED button.
You can edit the timers list via GREEN key and delete
with the RED button. You can sort recorded programme
by pressing BLUE button. You can also press OK button
to display other options.
Green bar: Displays the approximate capacity required
for the timers currently set.
RED button (Delete) :Erases the selected recording.
GREEN button (Edit): Makes changes on the selected
recording.
YELLOW button( Tag): Tag/untag a recorded
programme.
BLUE button (Sort): Changes the order of the
recordings. You can select from a wide range of sorting
options.
OK button: Displays playing options:
(Resume): Resumes the playback.
Note: Viewing main menu and menu items will not be
available during the playback.
INFO (Details): Displays the short extended
programmes in detail.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
- 17 -
Play Options
that are to be archived. When finished, press OK
button and the following menu will be displayed:
Play from start: Plays the recording from the
beginning.
In this menu, only Start recording at and Stop
recording at options are active. If you have already
split the recording, you could select any chapter. If it
is not split in chapters, the beginning and ending time
of the recording will automatically be the beginning
and ending time of the archiving.
Resume: Begins with playing from the last stopped
position.
Play from offset: Begins with playing, from the time
which is entered.
Manage chapters : It will display any marked chapters
(To set chapter marks, press the Menu button during
playback and enter the “Chapter Options” menu) and
begin with playback from the selected chapter.
Create archive (Archive management): To use this
feature, you should tag the files to be archived first
by using the YELLOW button. When all the desired
recordings are tagged, press OK button to display
Play Options and then select Create Archive. When
finished, press
button to start archiving.
Main Title
If you want to display a main title, select Include. If
not, select Skip. By selecting Skip, the options below
will be disabled.
Text
After you select the Include option in the “Main Title”
menu, you can edit the main title.
Duration
Set the duration of the appearance of the main title on
the screen.
Recording Title
If you want to display a recording title, select Include.
If not, select Skip.
Display
You can add name,start date/time or length information
to your archived file by using display option.
Duration
Set the duration of the appearance of the Edit
recording title menu main title on the screen.
Edit Recordings: Press OK button when Edit
Recordings is highlighted. Then select the recordings
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
- 18 -
Displaying Chapter Options
Recordings Configuration
During playback of a recording, if you press the MENU
button, Chapter Options menu will be displayed.
To configure the playback/recording options select the
Recordings option from the configuration menu.
Create New Chapter Mark: You can set a chapter
mark anywhere you want.
Forwards to Next Chapter: Goes to the next chapter
if there is more than one chapter available.
Back to Start Of Chapter: Goes to the beginning of
the current chapter. This is the last played chapter.
Back to Previous Chapter: Goes back to the
previous chapter if there is more than one chapter
available.
Setup
• Detailed settings can be configured to suit your
personal preferences.
• Select Setup from the main menu by using “ ”/“ ”
buttons and press OK button to display Setup menu.
Max Time Shift
Select the maximum time allowed for timeshifting.
See Time Shifting section for more information on
timeshifting
Auto Discard
Discard: When the HDD is full and a timer is set to
record, the unit will automatically discard previous
recordings based on this setting. The options are
as follows:
None: The unit will not discard any recordings and the
timer will not record the requested programme.
Oldest: Starting with the oldest, recordings will be
deleted to make space for the requested timer.
Longest: Starting with the longest, recordings will be
deleted to make space for the requested timer.
Shortest: Starting with the shortest, recordings will be
deleted to make space for the requested timer.
Unplayed: If this option is set to EXCLUDED any
unplayed recordings will NOT be deleted. If this option
is set to INCLUDED, unplayed recordings WILL be
deleted.
Watershed: Use these settings to change the
watershed time period. Press MENU button to exit.
Any recording which is made during the watershed
period will have “Playback” set to “Disallowed” when it
appears in the library. You can only play the recording
if you enter the PIN.
One Touch Recording :
HD alternatives :You can adjust this setting to suit
your preference.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
- 19 -
Configuration
Output Settings
• You can configure the main settings of your set top
box using the configuration screen.
• Select Configuration from Setup & Retune menu
and press OK to continue.
• You can press BACK button to exit
TV Type
• Digital terrestrial television channels can be
broadcast in a widescreen format which must be
output differently to normal and widescreen TV
sets.
Active channels
• You can select broadcasts to be listed in the channel
list. To display specific types of broadcast, you
should use Active channel list setting.
• Select Active Channels by using “ ”/“ ” button.
• You can select a broadcast type option from the list
by using “ ”/“ ” button. Available modes are: TV
Only, Radio Only, Text Only, Favourites or Show
All (if available).
• Press the MENU button to save the recent changes
and exit.
Scan Encrypted
• When this setting is on, search process will locate
the encrypted channels as well. If it is set as Off,
encrypted channels will not be located in automatic
search or manual search.
• This function defines the screen format of the
connected TV to enable broadcasts’ being displayed
correctly.
• Select 4:3 if you have a standard TV set with 4:3
aspect ratio.
• Select 16:9 if you have a widescreen TV.
Note: This function also enables you to change the
TV Type that you have previously selected during the
first time installation.
TV Out
• The set top box can output RGB and CVBS signal
via the TV SCART connector located on the rear
panel.
• Some devices might not support the RGB format.
• Use“ ”/“ ” buttons to highlight Scan Encrypted and
press “ ”/“ ” buttons to select YES or NO.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
- 20 -
Receiver Upgrade
Guidance
Guidance setting enables or disables the menu
access.
Set Pin
• Press OK to display the “Set PIN” window. Use
numeric buttons to enter the new pin number. You
will need to input your new pin a second time for
verification purposes.
• The factory default pin number is 0000. If you change
the pin number make sure you write it down and
keep it safe.
Low Power
• To ensure that your set top box always has the most
up to date information, you can use this setting. In
order for the proper operation, please ensure that
the box is set to standby mode.
• The STB automatically powers up at 3.00 A.M. every
day and searches for any new software that may
be broadcast. If found, the box will download new
software automatically. This operation will normally
take approximately 30 minutes.
• You can enable or disable automatic upgrade by
setting Automatic Scanning option.
• You can manually search for new software by
selecting Scan for upgrade.
• You can also update your set top box by using the
USB upgrade option.
If you enable low power option, low power mode will be
activated. In low power mode the power consumption
is less then 0.5W (in standby). If you disable low power
option the power consumption will be high in standby
mode .However the opening time will be shorter and
aerial RF loop_through is operative in stand-by when
the “Low Power” is set to “NO”.
Auto Standby
• Press “ ” or “ ” button to select Auto Sleep.
Use “ ” or “ ” button to set the Auto Sleep to
Disabled, 2 Hours, 4 Hours, 6 Hours or 8 Hours.
• After the timeout value is reached, the box will
switch off.
About
Select About and press OK button to display system
information.
Parental Settings
• This setting configures menu locking.
• Select Menu Locking option by using “ ”/“ ” buttons.
• Press OK button to enter the menu.
• To display parental lock menu options, PIN number
should be entered. Factory default PIN number is 0000.
After coding the correct PIN number, parental settings
menu will be displayed:
Audio Description
This function enables or disables the audio description
feature by pressing the “ ” or “ ” buttons.
Menu Lock
• Menu lock setting enables or disables the menu
access. You can disable access to the installation
menu or the whole menu system.
Audio description refers to an additional narration
track for blind and visually impaired viewers of
visual media, including television and movies. The
description narrator talks through the presentation,
describing what is happening on the screen during the
natural pauses in the audio (and sometimes during
dialogue, if deemed necessary).You can use this
feature, only if the broadcaster supports that additional
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
- 21 -
narration track. Use “ ” or “ ” buttons to select an
item. Then use “ ” or “ ” buttons to set.
Current (*)
(*) These settings can be changed if only the broadcaster
supports. Otherwise, settings will not be available to
be changed.
• Audio: Changes the audio language for the current
channel.
• Subtitle: Sets the subtitle language for the current
channel.
Installation & Retune
• Installation menu will help you to retune your set
top box in order to store new services or stations.
Available Langs.
• Select Installation from Setup menu by using “ ” or
“ ” buttons and press OK to continue.
You can see available language in this section.
Preferred Language (Optional)
By pressing the “ ” or “ ” buttons the preferred audio
description language is being changed.
• Installation menu includes the following items:
This setting can be used, only if it is available.
Relative Volume (Optional)
Using this option, the Audio Description volume level
can be increased or decreased relatively, according
to the general volume.
Configuring Language
Preferences
• You can operate the TV’s language settings using
this menu.
• Select Language from Setup menu and press OK
to continue.
Automatic Channel Scan / Retune
• Select Automatic Channel Scan / Retune by using
“ ” or “ ” button and press OK button.
• Then the following message will be displayed on
the screen:
• Highlight Yes or No by using “ ” or “ ” buttons and
press OK button to confirm.
• If Yes is selected, automatic search starts.
Menu: shows the language of the system.
• Selecting No cancels automatic search.
Preferred
These settings will be used if available. Otherwise current
settings will be used.
• After the scanning is completed, your set top box will
store all the available channels.
• Audio: Sets the preferred audio language.
• Subtitle: Sets the subtitle language. Selected language
will be seen in subtitles.
• Guide: Sets guide language.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
- 22 -
• In manual channel scan, the number of the multiplex
is entered manually and only that multiplex is
searched for the channels.
IP Settings
• For each valid channel number, signal level and
signal quality are shown on the screen.
• In both manual and auto search, any existing channel
in the database is not re-stored to avoid duplicates
of that channel.
Format Disk
If you want to format the internal hard disk, you can
use Format Disk option. ALL the data stored on the
hard disk will be lost in such a case.
• Press OK when the Format Disk option is
highlighted. A menu appears, requiring you to enter
the pin number. If you have not changed the pin
number, the factory default is 0000.
• After you enter the correct PIN code, a pop-up menu
appears on the screen to ensure that the hard disk
should be formatted.
• Select YES and press OK to format the hard disk.
Select NO and press OK to cancel.
First Time Installation
• If you want to load default settings of your set top
box, you can perform first time installation.
• Select First Time Installation by using “ ” or “ ”
button and press OK button.
• The following message will be displayed;
• Highlight No by using “ ” or “ ” button to cancel
installation.
• Highlight Yes by using “ ” or “ ” button and press
OK button to start first time installation.
• After you select Yes, factory settings will be loaded.
• You can configure your receiver’s IP settings by using
this menu screen.
• Press YELLOW button to set static IP settings.
• Use BLUE button to configure dynamic IP settings.
• You can press RED button to disable IP configuration.
• In order for the ethernet host to work correctly with
your internet connection it needs to have a unique IP
address. In most cases all of the parameters can be
provided by the DHCP server in their router. In this
case you should use the “Dynamic” option.
• In the unlikely event that you dou not have a DHCP
server in your router or if you prefer to assign your
own IP address, then the “Static” option can be
used. You will need to enter a unique IP address
along with the default gateway and DNS server. In
most domestic networks the default gateway and
DNS server will both be the IP address of the router.
Available MAC address will be displayed on MAC
address line.
Viewing The Media Browser
• To display Media Browser window, press either
“MENU” button on the remote control and then
select Media Browser by pressing “ ” or “ ” button.
Press “OK” button to continue. Media Browser menu
options will be displayed.
• Installation wizard will guide you through the
installation process. See the section, “First
Time Installation” in previous chapters for more
information on this process.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
- 23 -
Shuffle (RED button) : plays the files randomly. If
shuffle mode is enabled previous/next functions will
also jump to the tracks randomly.
Loop (GREEN button): plays all media files starting
with the selected file repeatedly.
Jump (Numeric buttons) : Jumps to the selected file
using the numeric buttons.
Previous/Next : jumps to previous or next file to
play.
Viewing JPG Files
Viewing USB Disk Contents
• You can play music, video and picture files from a
USB memory stick, but only music and picture can
be played from an external Hard Disk Drive.
Select a device from the main media browser screen.
Select PHOTOS option(only for harddisc drive)
using the Up or Down buttons, press OK button and
all available photo files will be displayed:
Note: Some USB compliant devices may not be
supported.
Note: If the USB stick is not recognized after power
off/on or First Time Installation, first, plug the USB
device out and power off/on the STB set. Plug the
USB device in again.
• Select USB Device by using Up or Down button
from the Media Browser menu and press OK button
and available file selection options will be displayed.
Media Browser USB Playback
Playing MP3 Files
Select USB device option from the main media
browser screen and press OK button. All available
music files will be displayed:
Jump (0...9 buttons) : jump to selected file using the
numeric buttons.
OK : (OK button) views the selected picture in full
screen.
Slideshow ( button): starts the slideshow with all
pictures in the folder.
Play This (OK button) : Plays the selected file.
Play ( button) : Plays all media files in the folder
starting with the selected one.
Stop (
button) : Stop the playing file.
File Operation: You can move or copy your files to
harddisc from external USB. Select your desired files
by using “ ”/“ ” button and press OK to export. Also
you can rename or delete selected files.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
- 24 -
Slideshow Options
Play This (OK button) : Plays the selected file.
Select picture in media browser using the Up or Down
buttons and press OK button. Press button to start
slideshow.
File Operation: You can move or copy your files to
harddisc from external USB. Select your desired files
by using “ ”/“ ” button and press OK to export. Also
you can rename or delete selected files.
Play (
button): Play files.
Stop (
button) : Stop the playing file.
Pause (
Rewind (
button) : Pauses the playback.
button): Goes backward.
Menu: Select subtitle and audio filef(if available)
Fast Forward (
Play (
(
button): Start the slideshow.
Green: Plays from Offset.
button) : Back to the file list.
Rotate (
buttons) : Rotate the picture using up/
down buttons.
Previous/Next (
next file of
button): Goes forward.
LANG: Sets subtitle or audio.
buttons) : Jump to previous or
slideshow.
Info : Activates the operations bar.
RED: Activates Shuffle mode.
Supported video types: .avi / mpg / mkv / mp4
Displaying ALL Files
Select USB device option from the main media
browser screen. Select ALL option using the Up or
Down buttons and press OK button. All available files
will be displayed.
GREEN : Activates Loop mode.
Playing Video Files
Select a USB device from the main media browser
screen. Select a video files using the Up or Down
buttons, press OK button to play video.
Jump (Numeric buttons) : Jumps to the selected file
using the numeric buttons.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
- 25 -
OSD Warning Messages
Digital
Digital Teletex
Teletext
(**(**
forfor
UKUK
only)
only)
HDD Initialisation
• Press the TEXT button.
Whenever you switch your set top box on, the
following status OSD will be displayed. This status
OSD will remain on the screen for a short while. This
OSD means that the hard disk is initialised.
• Operate it with the coloured buttons, cursor buttons
and OK button.
• The digital teletext information appears.
The operation method may differ depending on the
contents of the digital teletext.
Follow the instructions displayed on digital teletext
screen.
• When Press “OK” button or similar message appears
on the screen, press the OK button.
No Signal
• When the box receives no signal (e.g. the antenna
cable is disconnected), “NO DIGITAL SIGNAL
AVAILABLE” message will be displayed on the
screen.
• When the TEXT button is pressed, the TV returns to
television broadcasting.
• With digital terrestrial broadcasting (DVB-T), in addition
to digital teletext broadcasting together with the normal
broadcasting, there are also channels with just digital
teletext broadcasting.
• The aspect ratio (picture shape) when watching
a channel with just digital teletext broadcasting is
the same as the aspect ratio of the picture viewed
previously.
• When you press the TEXT button again, the digital
teletext screen will be displayed.
• Many digital terrestrial television channels broadcast
pages of information on the programmes, the weather,
news and other topics.
• This digital teletext can be displayed by your set
top box. Indeed, some channels broadcast teletext
information entirely.
• When such a channel is selected, it will usually display
the opening page of information automatically, after a
short break.
No Channels Have Been Added Yet
• When there are no channels stored in the box,
Channel List menu will not be displayed and channel
navigation will not be available.
• Some channels mostly have digital teletext pages
broadcast along with the television programme.
• In such cases, the following error message will be
displayed.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
- 26 -
BBC Iplayer
Internet Portal
On BBC channels, BBC Iplayer application is
avaliable on digital teletext. After pressing RED(or
TEXT) button on any BBC channel with Iplayer
application, you should select “BBC Iplayer”
on digital teletext to access BBC Iplayer page.
Please note that a network connection should be
established, in order to activate BBC Iplayer.
You can access internet portal using your settop box. To do this, an active internet connection
is required. After the connection is established,
you can select “Internet Portal” option from
the main menu to activate the portal. You can
access several applications using this portal.
•Use Up/Down and Left/Right buttons to navigate
between the items on iPlayer screen.
•Press OK button to confirm your selection.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
- 27 -
Problem
Possible Reasons
What To Do
The LED indicator does not
Power Adaptor is not connected.
glow.
Check if the AC adaptor is
plugged into the power socket.
No picture or sound.
No signal or weak signal.
Check the aerial and video
connections (scart).
Changes in the settings have not
taken effect.
The set top box was unplugged
without first switching to standby
mode.
Make sure that the box is in
standby mode before unplugging
it from the mains.
The remote control is not
working.
• The set top box is in standby.
• Remote control is out of range.
• Batteries are exhausted.
• Press the STANDBY button.
• Check that the remote control
range is clear.
• Replace the batteries with new
ones.
Information for Users in European Union Countries
The above mark is in compliance with the Waste Elektrical and ElectronicEquipment Directive 2002/96EC (WEEE). The mark indicates the requirement NOT to dispose the equipment including any spent or discarded
batteries as unsorted municipal waste, but use the retum and collection
systems available. If the batteries or accumulators included with this
equipment display the chemical symbol Hg, Cd, or Pb, then it means that
the battery has a heavy metal content of more than 0.0005% Memcury, or
more than 0.002% Cadmium or more than, 0.004% Lead.
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
- 28 -
GENERAL CHARACTERISTICS
Power supply for set-top box: 12 V DC 2Amp
Preffered DC Adaptor: 220 - 240 V AC, 50-60Hz
Input Frequency 470Mhz-862Mhz
Frequency Band
UHF
Maximum Power consumption
17,5 W
Standby Power Consumption
0,5 W
Operating temperature
5ºC to +40ºC
Storage temperature
-15ºC to +55ºC
Humidity
25 to 75 % rel
Physical dimensions
231x137x43mm
Weight
0,9kg
HARDWARE CONFIGURATION
Main Processor
BCM7230
Flash Memory
64 MB
DDRRAM
512 MB
DIGITAL CAPABILITIES
Transmission Standards
MPEG2, MPEG4 HD DVB-T-2
Frequency Band UHF
DEMODULATION COFDM with 2K/8K FFT mode.
FEC for all DVB Modes.(Automatically found)
16QAM, 64QAM, 256QAM with 1k, 2k, 4k, 8k, 16k, 32k FFT mode
VIDEO
ALL MPEG-4 (part 10) MP@ML Video Decoder
Aspect Ratio
4:3, 16:9 with pan vector
RGB analogue outputs.
BW ≥ 5MHz at 0.5 to 5 MHz sweep signal
CVBS analogue output.
Profiles
MPEG-4 H.264/AVC HP@L 4.0, MP@L 4.0 (HD)
- H.264/AVC MP@L 3 .2, HP@L 3 .2 (SD)
- MPEG-2 MP@HL, MP@ML (SD)
AUDIO MPEG1 Layer 1 and 2 Sampling frequencies supported 32 kHz, 44.1 kHz or 48 kHz.
Output can be programmed as STEREO, LEFT only or RIGHT only (on both outputs). This is useful for dual
mono channels in order to select the correct sound track, which is stored for every channel.
Wide dynamic range 16-bit resolution
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
- 29 -
REMOTE CONTROL
Operating Distance
Batteries 7 m Max.
2x1.5V Micro (R-03/AAA)
TUNERS
1 xRF In
IEC-type, female (75Ohm)
1 x RF Out (loop through)
IEC-type, male (75Ohm)
HARD DISK
Hard Disk capacity 500 GB
FRONT PANEL
Display : Seven segment display
Remote Control Keys
On / Off , Down ,Up
AUDIO
Output
2 Vrms, 0 dBfs / Z = 10 kohm
DIGITAL AUDIO
Output
Optical SPDIF
A / V & DATA IN / OUT
Scart TV scart
RGB Video Output
TV scart
Analog Audio Output
TV scart
Digital Audio OutputOptical output
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
- 30 -
Guarantee
Product Guarantee
This product is guaranteed against manufacturing defects for a period of
Year
This product is guaranteed for twelve months from the date of original purchase.
Any defect that arises due to faulty materials or workmanship will either be replaced,
refunded or repaired free of charge where possible during this period by the dealer
from whom you purchased the unit.
The guarantee is subject to the following provisions:
• The guarantee does not cover accidental damage, misuse, cabinet parts, knobs
or consumable items.
• The product must be correctly installed and operated in accordance with the
instructions contained in this manual.
• It must be used solely for domestic purpose.
• The guarantee will be rendered invalided if the product is re-sold or has been
damaged by inexpert repair.
• Specifications are subject to change without notice.
• The manufacturer disclaims any liability for the incidental or consequential damages.
• The guarantee is in addition to, and does not diminish your statutory or legal rights.
• In the event of a problem with the product with in the guarantee period call the
Customer Helpline: 0845 604 0105.
Guarantor: Argos Ltd
489 - 499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
For any help concerning set up and use of your STB please call the Customer Helpline: 0845 604 0105
- 31 -
Home Retail Group
489-499 Avebury Boulevard
Saxon Gate West
Central Milton Keynes
MK9 2NW
50266484