Download E5AN Temperature Controller User's Manual

E5AN
Preface
The temperature controller E5AN allows the user to carry out the following:
• Select from many types of temperature, nonĆcontact temperature sensor and analog
input
• Select heating and cooling control in addition to standard control
• Select AT (autoĆtuning) and ST (selfĆtuning) as tuning functions
• Use multiĆSP and the run/stop function according to event input (for units equipped
with the event input function)
• Use the HBA (heater burnout alarm) function (for units equipped with the heater
burnout alarm function)
• Use the communications function (for units equipped with the communications
function)
• Calibrate sensor input
• The E5AN features a watertight construction (NEMA4X : equivalent to IP66).
• The E5AN conforms to UL/CSA/IEC safety standards and EMC standards.
* This User's Manual describes how to use the E5AN.
Before using your E5AN, thoroughly read and understand this manual in order to
ensure correct use.
Also, store this manual in a safe place so that it can be retrieved whenever necessary.
* For an additional description of the communications function, also refer to the
E5AN/EN/CN/GN Temperature Controller, Communications Function User's
Manuals (Cat. No. H102).
E OMRON, 1999
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted,
in any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior
written permission of OMRON.
No patent liability is assumed with respect to the use of the information contained herein. Moreover, because
OMRON is constantly striving to improve its high-quality products, the information contained in this manual is
subject to change without notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no responsibility for errors or omissions. Neither is any liability assumed for damages
resulting from the use of the information contained in this publication.
I