Download TV Service Manual
Transcript
The following adjustments are carried out using the » DIALOG CENTER «. ❒ The volume of normal TV broadcasts and commercials may be different. You may equalize this volume. Call up » DIALOG CENTER « with button h and button G. Ǻ ❒ Adjustments are always terminated by pressing ¢. TXT 1 2 Select the line » SPECIAL FUNCTIONS « from the » DIALOG CENTER « with button p or P and confirm with G. 1 2 ❒ 2 Select and call up the line » Parental lock «. Select the line » Volume limiter « and select »on« with button F or E. 3 Enter a number code with the number buttons 0…9, always using four digits (e.g. 1111). Setting the Sleep Timer 4 ❒ Ǻ 1 You can input a switch off time for your TV set with the »SLEEP TIMER« menu. The set switches to standby after the set time has elapsed. Select the »SLEEP TIMER« line from the »DIALOG CENTER« with the P or p button and confirm by pressing the G button. The »SLEEP TIMER« menu appears. Ǻ Save the number code with G. The key appears in red, switch off the page » PARENTAL LOCK « with button TXT . Ǻ ❒ 2 Enter a number code with the number buttons 0 … 9, always using four digits (e.g. 1111). Ǻ Select the line » Pic./sound opt. « and select » off « with button F or E. Station name (SERVICE-functions) Select the line » SERVICE « from the » DIALOG CENTER « with button p or P and confirm with G. – – The set switches to the TV screen. After switching off again the parental lock is activated again. min. 0–9 Ȅ Ǻ TXT To cancel the parental lock function, select and call up the line “Parental lock” from the » DIALOG CENTER «. Enter the number code with four digits and press button . If you forget the number code, a number combination on the last page of this instruction manual will assist you. If you press these buttons in sequence on the remote control, the “lock” will be cancelled. - 3 4 Input the desired switch off time to two places (from 01 … 99 min) with the 0 … 9 digit keys. 5 Select the line » Station name « and select » off « with button F or E. When changing programme position, only the number of the programme position is displayed. 1 GRUNDIG Service 2 ❒ Setting is ended with the SERVICE ¢ button. TXT 1 Call up the »DIALOG CENTER« with the h and the G buttons. Displaying the programme position number 2 Select the »SERVICE« line with the P or p button and call it up using the G button. It is possible to permantently display the number of the selected programme position. 3 Select the desired functions with the P or p buttons. Press the h button until the »OK Dialog Center« on-screen display disappears. The programme position number is permanently displayed. Press the h button twice if you wish to cancel this function. 4 Change with the F or E buttons. Ǻ Each setting is ended with the ¢ button. TXT Select the blue screen Select the black screen With this setting it is possible to avoid distracting flickering of channels whilst switching channel position. Station name on/off Switch the station display on or off (see »Station name«). ❒ Ń! The input switch off time can be canceled with the - button. Select the required colour norm (PAL or auto). With this setting a grainy image can be switched to a blue image. ❒ Switch on the set. To adjust volume, brightness and colour contrast, scales appear. These may be switched off. SLEEP TIMER ❒ Switching off parental lock 1 Ȅ 1 Please take good note of the number code! Picture/sound scale Select the line » SPECIAL FUNCTIONS « from the » DIALOG CENTER « with button p or P and confirm with G. The colour norms are automatically assigned when allocating the channel position with channel search. You do not need to carry out this setting if the colour is already well adjusted on the different channels. ¢ After switching off the set and switching on again the page » Parental lock « appears, all functions are locked. Colour (manually adjust the colour norms) ❒ SAT This settin is only necessary if an external SNR 105 MicroSAT receiver is connected. Three settings can be selected: »ON1«, »ON2« and »off«. See the operating manual of the SNR 105 to determine which setting you must make. If no SNR 105 is connected, this setting must be set to »off«. Channel position selection is not possible if SAT »ON1« is selected without a connected SNR 105, the screen remains dark and »SAT« is displayed. Switching formats The automatic picture format switching function can be switched off in poor reception conditions. 1 ❒ Ǻ Select the desired setting. Service Code The functions of this line are reserved for authorised dealers. CUC 2030 N / 2050 N / 2058 N / 2059 N / 2080 N 2 Call up the » DIALOG CENTER « using buttons h and G. 2 Select the line » TV on with « and select the desired program position » Prog 1 « or » AV « with F or E. Some broadcasting stations broadcast their station name. When changing programme position this is briefly displayed. You may switch this display off. 1 ❒ Activating parental lock 1 Select the line » SPECIAL FUNCTIONS « from the » DIALOG CENTER « with button p or P and confirm with G. 2 ❒ ❒ 1 TV on with ... If you frequently use the set as an AV monitor – e.g. together with a camera as a monitoring system or together with a satellite receiver – then this function can give priority to the programme position » AV «. After switching on with the on/off switch, instead of programme position » P 1 «, programme position » AV « will appear. Equalizing the volume Decoder selection Refer to »Setting for operation with decoder« (refer to page 16). Using this function, you may enter a number code which blocks all functions. Comfort functions Comfort functions Ǻ ❒ Parental lock Allgemeiner Teil / General Section 1 - 18 Special functions