Download Service Manual Orion Peripheral Stations Version 2.20

1.3
Entry and Exit Station (LE/LX) Orion XR
1.3.1
Technical Data LE/LX
Width:
410 mm
Height:
1250 mm
Depth:
406 mm
Weight approx.:
52 kg
Ambient temperature operation:
-20°C to +40°C (-4°F to +104°F)
Storage Temperature
(no operation):
-20°C to +80°C (-4°F to +176°F)
Mains supply:
115V/60Hz or 230V/50Hz AC +/- 10%
Power consumption load:
100…170 W
Power consumption heating:
500-700 W (115V/60Hz) or 450-620W (230V/50Hz)
Power consumption depends on heater ambient temperature
Environment:
PE/PA can be installed in roofed or unroofed environment.
Capacity of entries and exits:
PE/PA can handle up to 500 incoming and outgoing vehicles
per hour
Ticket capacity:
PE/PA has room for a ticket box that contains 5000
tickets/receipts.
Reliability:
All relevant data are stored twice on the magnetic tape of the
Zeag ticket/card.
10 / 56
Orion_ServiceManual_S01_InstallationPeripheralStations_EN_V2.20A.doc
Section 1: INSTALLATION PERIPHERAL STATIONS
Orion_ServiceManual_S01_InstallationPeripheralStations_EN_V2.20A.doc
Dimensions LE/LX
98
.5
°
1.3.2
Service door
Ventilation slots
(air flow from inside to outside)
1250
47.5
2 Levelling assemblies
P/N 3202.4170
(Screw M6 for Allen key 5mm)
Seal joint between station and
pavement surface with e.g.
Silicon or Acryl to prevent
water reaching housing inside
C
90
°
55
B
213
406
A-A
B
350
410
30
55
277
55
55
362
30
P/N
3202.4121
Slot size: 9 x 45 mm
(Will be 13 mm wide after
approx. June 2008)
C
C-C
Section 1: INSTALLATION PERIPHERAL STATIONS
Ventilation slots
(air flow from outside to inside)
A
60
11 / 56
A