Download Brief operating instructions FSA2x2

Transcript
Brief operating instructions FSA2x2
Quick start:
Automatic start (Timer)
1. Switch on the control unit.
1. Switch on the control unit.
2. select the required mode of operation
2. Select the “Startzeit“ (Start time) display.
(press the button ‘Sauna’ or ‘Sauna mit
3. Set the start time.
Feuchte’ once – the light next to the
4. Press the button with the desired mode
button blinks)
of operation (Sauna or Sauna mit
3. Start the mode of operation (press the
button Sauna or Sauna mit Feuchte).
Feuchte) to activate the timer. The lamp
next to the button blinks
Set / change the set values:
Use the
or
buttons to select the respective set values and then press the
to
access the programming mode to change the set setting values. Now enter the desired set
value using the
buttons and press the
button again to end the programming
mode.
26.07.2006