Transcript
Water and drain requirements Water supply Steam line Pressure relief valve Drain line 1 Steam generator model Dedicated circuit required Generator: S-450 Installation Notes 1 2" copper line, 2" NPT female thread Install this product according to the installation guide. Factory sized: L x H x W = cubic feet. Choose the appropriate 5 5 8" copper line, 8 " NPT female thread model. For every foot of ceiling height over 8 ft use the next larger steam unit. Always round your measurements Built in pressure relief valve up. Wall material is irrelevant. 1 1 2" copper line, 2" NPT female thread For this steam generator, do not exceed the maximum volume rating: 4.5KW, 240V, 19A, Generator: S-450 Power rating Maximum volume rating 4.5KW, 90 cu ft