Transcript
ASSEMBLY INSTRUCTIONS STYLE#: 21918 Careful unpack all lamp parts from the carton. 1. Take the lamp carefully out of the Carton,and place it on a flat surface. 2. Be sure the power to the installation point is power off. 3. Turn the inner-threaded turning counter-clockwise and move the coupling upward. (Picture 1) 4. Move the metal cap upward to allow space for glass ball. (Picture 2) 5. Slide the Glass Ball to allow the clips fit into the glass. (Picture 3) 6. Rotate the Glass Ball to allow the clip from other end fit into the glass. (Picture 4) Fixture body ring 7. Put the metal cap downward to touch with the glass top. (Picture 5) 8. Turn the inner threaded turning clockwise until tightened (Picture 6) 9. Swing the fixture body ring to reach with evenly gapped. (Picture 7) Finial 10. Now you can enjoy your beautiful fixture. (Picture 8) Style #21918 Coupling Hex Inner threated turning Metal Cap Metal Cap Socket Picture1 Fixture body ring Picture 1 Picture 2 Metal Cap Metal Cap Metal Cap Clips Glass ball Picture Picture 3 3 Glass Ball Picture 5 Picture 4 Fixture Boby ring Picture 6 Picture 7 Picture 8
