Transcript
Electronic Rat Trap Instructions 1. Remove the battery cover. Insert 4 “C” batteries. Replace the battery cover. 4. Turn on the trap – a green light will blink once showing the trap is working properly. 2. Bait the trap through the hole in the back wall using a small amount of peanut butter, bacon, dry pet food, nuts, etc. Be sure to use a Q-tip, toothpick or another tool to bait so your scent is not transferred onto the trap. 5. A blinking green light will indicate a kill. Dispose of the dead rodent, bait, reset and place for continued rodent control. 3. Place the trap where you have seen signs of rodent activity or along the wall where rodents primarily travel. The trap should be placed lengthwise against the wall with the entrance hole nearest the wall. 1 2 4 5 www.victorpest.com 3
