Download none Garage Door Insulation Kit - 8 pcs Installation Guide

www.cellofoam.com
UNIVERSAL METAL GARAGE DOOR INSULATION KIT – INSTALLATION GUIDE
Kit Contains: 8 sheets – 1 ¼” x 20” x 54”
Kit will insulate a standard 9 foot garage door. Larger doors require extra kits
Required Tools:
1. Utility Knife
2. Tape Measure
3. Straight Edge
4. Safety Glasses
Step 1: Measure length between the two vertical rails (“A”, “B”) on either side of the garage door.
Step 2: Cut each insulation sheet to length.
Cellofoam North America, Inc • 2107 East View Parkway • Conyers, GA 30013 • Phone: 888-772-6383 • FAX: 678-413-3790
www.cellofoam.com
Step 3: Snap off the insulation where cut.
Step 4: Insert the excess insulation behind the vertical rails
Step 5: Insert the insulation sheet between the horizontal rails.
Cellofoam North America, Inc • 2107 East View Parkway • Conyers, GA 30013 • Phone: 888-772-6383 • FAX: 678-413-3790