Download Baldwin 0106.003 Installation Guide

BALDWIN
Thank you for selecting home accent products from Baldwin.
All products have been crafted from solid brass, then carefully
polished and finished for years of decorative appeal and enjoyment.
Limited Lifetime Warranty for Baldwin Door Knockers
Baldwin warrants to the original purchaser that it will repair or
replace, at Baldwin's option, any defects or failure due to
manufacturing defects for the life of this product as long as the
original purchaser owns the product. This warranty does not cover
normal wear or tear, failure due to abuse, or damage where repairs
have been made or attempted by others. This warranty shall be void
in the event that the product has been altered (including, engraving).
This warranty gives you specific legal rights and you may have other
rights which vary in certain states or provinces. Any incidental,
indirect or consequential loss, damage, or expense that may result
from any defect, failure or malfunction of the product is not covered
by this warranty. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. For warranty repair or
replacement visit retailer where purchased or call 1-800-566-1986.
www.baldwinhardware.com
Customer Help Line: 1-800-566-1986
© 2010 Baldwin Hardware Corporation,
Lake Forest, CA, 92610 PK.1232 (01/10)
AY
[6.3mm]
[6.3mm]
x
NU
| 3 Re”
[100.0mm]
NU
Tools required: Pencil,
screwdriver, drill and
1/4” drill bit. Wear
safety goggles during
installation.
Installation:
1. Align vertical centerline
of template with vertical
center of door at desired
height.
2. Tape template to door.
3. Mark hole centers and
drill through door with a
1/4” drill bit.
4. Mount door knocker
with screws and cover
washers.