Transcript
Installation Instructions: RBSF- Shingle Roof 1. Included in box (1) Round back Solar Fan (RBSF) 2. Before installing ( RBSF ), decide location to place opening. Mark and cut opening *(cut at least two rows down from top of shingle roof). Remove shingle Top only remove bottom shingle 5 watt solar panel Underside 3. Apply roofing grade sealant, silcone or tar on the underside 4. Place RBSF above opening by sliding flange in place of flange. underneath shingle. Using a #8 or #10 screw(or nails) should be placed approximately a distance of 4 inch on center on all 4 sides. top half of flange should be secured underneath shingles sealant around perimeter screws should be @ 4" on center on all 4 sides Active Ventilation Products, Inc. 311 First Street, Newburgh, NY 12550-4857 800-ROOF VENT (766-3836) Website: roofvents.com Ph: 845-565-7770 Fax: 845-562-8963 Email: [email protected]
