Transcript
Use and Care Guide Natural Roman Shade A TOOLS REQUIRED Drill & 1/16" bit Pencil CLEANING May be cleaned with vaccum attachement or duster. A C 3/4” 1,905 cm 1/2” 1,27cm DB D 1/2” 1,27cm 3/4” 1,905 cm D 1/2” 1,27cm E Description Quantity MOUNTING BRACKET 2 (23"-48") / 3 (52"-72") BRACKET SCREWS 8 (23"-48") / 12 (52"-72") CLEAT SCREWS WING NUTS 2 A Fig. 2 (23"-48") / 3 (52"-72") CORD CLEAT 1 3/4” 1,905 cm Installation 2 EC D PREPARING FOR INSTALLATION 1/2” 1,27cm E B E C Part A B C D E B CA 3/4” 1,905 cm PACKAGE CONTENTS A Tape Measure B □ Place bracket on the shade by putting bolt through slot on top of shade. Secure and tighten the bracket using a wing nut. (Fig.A) □ Brackets can be mounted behind shade (Fig.A) or brackets can be mounted to the side of shade (Fig.B) POSITION SHADE □ With brackets attached to the shade, hold the shade against the window where the shade will be mounted. Mark position of brackets with a pencil. Remove brackets from shade. 3 INSTALL BRACKETS □ Place brackets at pencil marks. Predrill small holes for screws. Brackets may be mounted Fig. B to ceiling (Fig.C) or to wall (Fig.D). Screw brackets into place. Fig. A Fig. A Fig. C Fig. A Fig. B Fig. B Fig. B HOMEDEPOT.COM Fig. D THIS IS NOT RECOMMENDED FOR USE AROUND CHILDREN! Fig. C Please contact 1-877-527-0313 for further assistance.
