Transcript
SPEAKMAN COMPANY S-2007 Installation, Operation & Maintenance Instructions ANYSTREAM® SHOWERHEAD DESCRIPTION Polished chrome plated ANYSTREAM® S-2007 Showerhead with a 3-1/4” outer spray adjustment ring. 5 selfcleaning plunger nozzles resist scale build-up and provide 50 spray streams for a full body coverage pattern. The center core nozzle delivers twelve massaging jets and a combination spray is included. Water conserving pressure compensating AUTOFLO® device reduces flow to 2.5 GPM/9.46LPM maximum, to meet existing ANSI A112.18.1 Standard. ½” NPSM inlet. OPTIONS SPECIFICATIONS SUPPLY INLET: ½” NPSM FLOW RATE: 2.5 GPM/9.46LPM MAXIMUM SHIPPING WEIGHT: 0.6 LBS. PB – Polished Brass Finish BN – Brushed Nickel Finish INSTALLATION Remove the old shower head from the shower arm. Clean off any debris on the threads of the shower arm. Wrap Teflon tape around the shower arm threads in a clockwise direction. Turning in a clockwise direction, screw the new Speakman shower head onto the shower arm. Tighten with a wrench. Turn the water supply on and check for leaks. OPERATION To adjust the spray pattern of the shower head, simply rotate the outer ring to the desired spray (Full-Body, Dual action or Massage). ROUGH-IN MEASUREMENTS MAINTENANCE The gleaming finish of your SPEAKMAN ANYSTREAM® shower head can be cleaned by using mild soap and warm water. Dry immediately with a soft, clean cloth for best results. The flow control device limits water flow to 2.5 gallons per minute. The small orifices may become clogged with scale and other minerals found in potable water. To clean the flow regulator, simply remove the shower head from the bent arm, dislodge the flow regulator which is located in the inlet and Product improvements may cause specification and dimensional changes without notice. SPEAKMAN ® PO Box 191 Wilmington, DE 19899 Phone: 800-537-2107 Fax: 800-977-2747 Visit us on the web at www.speakmancompany.com 1/11 92-2891 Rev. 4
