Transcript
K-2355 ARCHERTM UNDER-MOUNT LAVATORY Roughing-In Installation Notes Product Information Install this product according to the installation guide. Applicable product: Under-mount lavatory K-2355 Fixture*: Basin area 17-5/8″ (448 mm) x 13″ (330 mm) Water depth 3-3/4″ (95 mm) Drain hole Ø 1-3/4″ (44 mm) * Approximate measurements for comparison only. Included components: Basin clamp assembly Cut-out template 52047 1051937-7 Recommended accessory: Adjustable P-Trap Supplied basin clamp assemblies require 1″ (25 mm) minimum countertop thickness. Installer must supply anchors for thinner countertops. NOTICE: Countertop manufacturer or cutter must use the cut-out template provided with the product, or a current one provided by Kohler (call 1-800-4-KOHLER). Kohler is not responsible for cut-out errors when incorrect cut-out template is used. Will comply with ADA when installed per section 606 Lavatories of the Act. Fixture conforms to ASME Standard A112.19.2/CSA B45.1. All dimensions are nominal. K-8998 CL of Fitting 2-1/2" (64 mm) 6-1/2" (165 mm) 15-5/16" (389 mm) 3" (76 mm) 9" (229 mm) 34" (864 mm) 1-1/8" (29 mm) 9-15/16" (252 mm) 19-7/8" (505 mm) 7/16" (11 mm) 7-1/2" (191 mm) 13-1/8" 14" (356 mm) (333 mm) 24" (610 mm) 8" (203 mm) 6" Min (152 mm) 27" Max (686 mm) Min 9" (229 mm) Min Recommended ADA Installation Ø 3/8" (10 mm) 3/8" Hot 3/8" Cold 1-1/4" Outlet 5/8" (16 mm) Sealant Sealant Marble 4" (102 mm) Standard Installation ARCHERTM UNDER-MOUNT LAVATORY 1063457-1-D Installation Wood
