Download Dale Tiffany TT100273 Instructions / Assembly
Transcript
ASSEMBLY INSTRUCTIONS: Item No: TT100273 FOR RETURN SHIPPING PURPOSES: PLEASE RETAIN ORIGINAL PACKAGING TO MINIMIZE DAMAGE. 1. Place the lamp base (A) on a level surface. 2. Screw the threaded rod (C) into socket assembly (B). 3. Adjust the knurl nut (D) onto the threaded rod (C). This can be used to raise the shade a little if necessary. 4. Place shade (E) over threaded rod (C), and tighten finial (F) securing the shade in place. 5. Insert bulbs into the bulb socket. To Replace the Night Light 1. Gently remove finial (F), shade (E), and threaded rod (C). 2. Turn the base upside down, loosen screws nuts (G) and slide base (A) off shade (H) and replace bulb. 3. Place shade (H) over base (A) and tighten screw nuts (G) securing the shade in place. Recommended (2) maximum 60 WATT Type “A” Bulbs or (2) maximum 13WATT CFL Bulbs (Bulbs not included) Recommended (1) 25Watt, Type “B” Bulb or maximum (1) 13Watt, CFL Bulb (Bulb included) Cleaning of your lamp. Unplug lamp, wipe with a damp cloth. Do not use abrasives *SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Made in China Revision – 08/03/12 INSTRUCIONES DE ASAMBLEA: Modelo: TT100273 PARA RAZONES DE REGRASAR: POR FAVOR CONSERVE EL IMPAQUETADO ORIGINAL PARA REDUCIR DAÑOS MINIMO. 1. Ponga la base (A) en una superficie plana. 2. Atornille la tuerca roscada (C) en la asamblea de la portalámpara (B). 3. Atornille la tuerca rodonda (D) en la tuerca roscada (C). Esto se puede utilizar para levantar la pantalla un poco si es necesario. 4. Coloque la pantalla (E) sobre la tuerca roscada (C) y atornille finial (F) asegurando la pantalla en su lugar. 5. Inserte bulbos en el zócalo. Para Reemplazar la Luz de Noche 1. Retire con cuidado el remate (F), pantalla (E), y la tuerca roscada (C). 2. Ponga la base al revés, aflojar las tuercas de los tornillos (G) y la base de la diapositiva (A) fuera de la sombra (H) y cambiar la bombilla. 3. Coloque la pantalla (H) sobre la base (A) y apriete las tuercas (G) asegurando la pantalla en su lugar. Usar máximo (2) 60 vatios, tipo “A” Bulbos o máximo (2) bombillas CFL de 13 vatios (Bulbos no incluidos) Usar máximo (1) 25 vatios, tipo “B” Bulbo o máximo (1) bomiblla de CFL de 13 vatios (Bulbo incluido) Limpieza de lampara Desenchufe la lámpara, limpiar con un trapo húmedo. No utilice los abrasivos. *Guardar estas instructiones para una referencia futura. Hecho en China Revision – 08/03/12
This document in other languages
- español: Dale Tiffany TT100273