Download Dale Tiffany FTT10015 Instructions / Assembly
Transcript
ASSEMBLY INSTRUCTIONS: Item No: FTT10015 1. FOR RETURN SHIPPING PURPOSES: PLEASE RETAIN ORIGINAL PACKAGING TO MINIMIZE DAMAGE. Place the lamp base on a level surface. Screw the socket assembly into the base. Pull balance of cord from base to tighten excess. 2. Insert the harp until it sits firmly into the saddle. 3. Adjust the knurl nut on harp. This can be used to raise the shade a little if necessary. 4. Place the shade over the end of the harp and tighten with the finial securing the shade in place. 5. Insert 60Watt bulb into bulb socket. Uses (1) Maximum 60WATT Type “A” Bulb. (Bulb not included). Cleaning of your lamp Unplug lamp, wipe with damp cloth. Do not use abrasives. *SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Made in China Revision 03/22/11 INSTRUCIONES DE ASAMBLEA: Modelo: FTT10015 1. PARA RAZONES DE REGRASAR: POR FAVOR CONSERVE EL IMPAQUETADO ORIGINAL PARA REDUCIR DAÑOS MINIMO. Ponga la base en una superficie llana. Atornille la asamblea de bombilla en la base. Jale el balance de la cuerda de la base para apretar exceso. 2. Inserte la arpa hasta que se siente firmemente en la silla de montar. 3. Ajuste la tuerca redonda en la arpa. Esto se puede utilizar para levantar la pantalla un poco en caso que sea necesario. 4. Coloque la pantalla sobre el extremo de la arpa y apriete con la tuerca finial aseguranda la pantalla en su lugar. 5. Inserte un bulbo de 60 vatios en el zócalo. Usar (1) bulbo maximo de 60 vatios tipo “A”. (Bulbos no incluidos). Limpieza de lampara. Desenchufe la lámpara, limpiar con un trapo húmedo. No utilice los abrasivos. * Guardar estas instructiones para una referencia futura. Hecho en China Revision 03/22/11
This document in other languages
- español: Dale Tiffany FTT10015