Transcript
CON-TACT LINER EMBOSSED SOLID GRIP Non-Adhesive SURFACE PREPARATION Clean surfaces prior to application as necessary. All surfaces should be dry, clean, and smooth. CAUTION Not for use on lacquered or urethane surfaces. Finish damage may occur. Care should be taken when placed on latex semi-gloss and gloss paints. Painted areas must be completely cured otherwise the liner may stick to the surface. Cool and/or humid conditions required a longer curing time. APPLICATION Measure area to be covered Cut to desired size and/or shape CLEANING AND MAINTENANCE Washable Clean with a damp cloth and mild soap if necessary May be submerged in water with mild soap or detergent Hand wash Machine Wash, Gentle or Delicate cycle with mild soap or detergent Do Not Wring Machine dryer should not be used. Lay flat to dry La Mirada, CA tel. 714-736-1000 fax. 714-736-2078 customer service. 800-321-1741 email. [email protected]