Transcript
KITCHEN STRAINER | cat No. 15584 7 BARCLAY INSTALLATION INSTRUCTIONS NT RIM BRASS OR 55 STRAINER FLANGE Fr a A A Dn A me r rl x FLANGE GASKET POLYPROPYLENE DRAIN BODY FERRULE de aH STRAINER (5) uu WASHER ==" un 1 1/2" DRAIN TUBE (NOT SUPPLIED) (1) APPLY A SMALL AMOUNT OF NON-ACID SILICONE UNDER THE RIM OF STRAINER FLANGE AND PUSH DOWN INTO SINK (2) LUBRICATE FLANGE GASKET WITH WATER, PLACE INTO LIF OF DRAIN BODY AND POSITION DRAIN BODY ON THE SINK BOTTOM (3) LINE UP RIBS IN DRAIN BODY AND STRAINER FLANGE THEN SCREW IN FERRULE. CAUTION: HAND TIGHTEN THEN 1/4 TURN WITH SMALL SCREW DRIVER. DO NOT OVER TIGHTEN PUSH STRAINER INTO FERRULE IN DRAIN BODY SLIDE NUT ON 1 1/4" DRAIN TUBE, PLACE WASHER ON DRAIN TUBE SMALL DIAMETER UP. PUSH TUBE INTO DRAIN BODY AND HAND TIGHTEN THE NUT. TEST FOR LEAKS. FINISH CARE AND MAINTENANCE DO MOT USE ANY HAREH ACID BASED DETERGENTS Oe CLEAMERS SUCH AS SOFT SCRUE PICRUBEING BUBELES 06 COMET PTO CLEAN, USE ONLY A _DAMP SOFT CLOTH.STANDARD WINDEX SCAN ALSO BE USED SPARINGLY. WARRANTY CONTACT BARCLAY FOR WARRANTY INFORMATION. CLAIMS REQUIRE PROCE OF PURCHASE. 2/7/12 P 847-244-1234 | www.barclayproducts.com
