Transcript
Banbury® Technical Specification Tank Lever Stock Numbers: Y2601BN – Tank Lever Brushed Nickel Finish Y2601CH – Tank Lever Chrome Finish Y2601BRB – Tank Lever Mediterranean Bronze Materials: Tank Lever is constructed of zinc. The arm mechanism is constructed of plastic. Y2601 Dimensions: Installation Instructions: 1. 2. 3. 4. 5. 6. 7. 8. 9. Remove existing tank lever. Remove the arm mechanism from the new tank lever by loosening nut (A). Unscrew the tank nut (B). The thread for the tank nut is a left handed thread. Position the new tank lever through the tank hole. The tank lever handle should be pointing aw ay from the toilet bow l. Tighten nut (B). Depending on the curvature of the tank, there might be a slight gap betw een the outside of the tank and the base of the lever. Place the arm mechanism on the tank lever post. Adjust the arm up or dow n as needed. Tighten nut (A) to secure the arm in place. Adjust the arm mechanism from side to side as needed. Make sure the arm does not come into contact w ith the tank w all or the flush mechanism. Tighten screw (A) to lock the arm in place Attach the flapper valve chain to one of the provided slots on the arm. Be sure to eliminate any slack in the chain. Make sure no w ater is leaking through the flapper w hen the handle is in its normal position (not f lushing) Cleaning Instructions: To preserve the fine finish of this product, clean only with a soft damp cloth. Dry well. Do not use commercial or abrasive cleaners. Stock Number:______________________Tank Lever By Creative Specialties 2 5 3 0 0 A L MO E N D R I V E N O R TH O L MS TE D , O H 4 4 0 7 0 C O R P O R A TE H E A D Q U A R TE R S : ( 8 0 0 ) 3 2 1 - 8 8 0 9 F A X: ( 8 0 0 ) 8 4 8 - 6 6 3 6 I N TE R N A TI O N A L : ( 4 4 0 ) 9 6 2 - 2 0 0 0 F A X: ( 4 4 0 ) 9 6 2 - 2 7 2 6 C U S TO ME R S E R V I C E ( U S A ) : 8 0 0 - 8 8 2 - 0 1 1 6 F A X: ( 8 8 8 ) 3 7 9 - 2 7 2 0 W W W . MO E N . C O M Copyright Creative Specialties International Literature # BA1523
