Download Viagrow VHH3X3X6 Use and Care Manual

Grow Tent Instructions
3
1
X
3
1
X
1
6 (Actual 35"
X
35" x 71")
­
PART LIST: Grow Tent
k
[Q]J
x4
[Q51
x2
k
[Q2]
x4
00
x2
[IDJ
x2
,...
""[QZ]
x1
[M]
x2
1
r[QBJ
x2
ASSEMBLY: Grow Tent
1. Layout Grow Tent making sure all the zips are
completely undone, this piece is for the bottom section.
Assemble the tent frame as detailed.
2. Insert poles #03 and #04 to each #01 connector on the other two ways as picture 2 shown.
3. Insert poles #05 and #06 to each #02 connector on the other two ways as picture 3 shown.
4. Connect the two parts when you have finished step 2 and 3 as picture 4 shown, you'd
better do this with other people.
Now you have finished the assembling of the frame.
4
2
IDJ]
ID]
~
~
3
00
lQ2]
IQ2I
lQ2]
[Q2]
Grow Tent Instructions 2
•
5
5. Put on the canvas to the frame from the bottom as picture 5 shown,
and then the back side, make sure the canvas is unzipped.
6. Put on the top part of the canvas then close the zippers from both
left and right sides.
7. put poles #07 and #80n the top ofthe frame as picture 7.
8. Insert the Grow Tent tray liner and attach to with Cable tie
fastening to pole.
All parts have been assembled.
~
~
I
m7J
m7J
~
I
v
I
\
~
8
iJ(
Jj
/
'"
~
7"~
ct> ct>
D" J
#'d ~= q
~ ~ 9. Close all the zippers and make final adjustments to the canopy.
10. Figure 10 shows the recommended installation for your filter and grow light.
The filter is positioned between or affixed underneath the filter fixtures (7).
9
--
10
)
I
I