Transcript
Instructions for Use Step 1: Peel away clear cellophane release liner. Step 2: Press tape firmly on object to be wrapped, hold in place and begin first by wrapping the tape once completely over itself. Step 3: While holding the tape in place, stretch to 2 to 3 times its length and wrap object with a 2/3 overlap. This will ensure a tight seal. Step 4: To complete the repair, wrap tape completely over the previous layer and press firmly. The information presented herein was prepared at BERRY PLASTICS CORPORATION (25 Forge Parkway Franklin, MA 02038) by qualifi ed technical personnel. To Berry Plastics’ knowledge it is true and accurate. However, the information and recommendations are furnished for these products with the understanding that the purchaser or user, as the case may be, will independently determine that the product is suitable for the intended use, and that such use complies with all applicable federal, state and local laws and regulations. The data are submitted only for the user’s information and consideration, and do not constitute a warranty of any kind (including but not limited to a warranty of merchantability or of fi tness for a particular purpose), or a representation for which BERRY PLASTICS assumes any legal responsibility. For more information: For more Parkway information: 25 Forge 25 Forge Parkway Franklin, MA 02038 Franklin, MA 02038 Phone 508.918.1600 Phone 508.918.1600 Toll Free 1.800.343.7875 Toll Free 1.800.343.7875 Fax 508.918.1901 Fax 508.918.1901 TM tapes.berryplastics.com © Berry Plastics Corporation 016HJ_05-12 Feb. 2009
